Download or read book Self consolidating Concrete for Precast Prestressed Concrete Bridge Elements written by Kamal Khayat and published by Transportation Research Board. This book was released on 2009 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: At head of title: National Cooperative Highway Research Program.
Download or read book Self consolidating Concrete for Cast in place Bridge Components written by George Morcous and published by . This book was released on 2016 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: "National Cooperative Highway Research Program (NCHRP) Report 819: Self Consolidating Concrete for Cast in Place Bridge Components presents recommended guidelines for the use of self-consolidating concrete (SCC) in cast in place highway bridge components. These guidelines address the selection of constituent materials, proportioning of concrete mixtures, testing methods, fresh and hardened concrete properties, production and quality control issues, and other aspects of SCC. The report also presents proposed changes to the AASHTO LRFD Bridge Design and Construction Specifications to address use of SCC for cast in place highway bridge components. The information contained in the report will guide materials and bridge engineers in evaluating, selecting, and specifying SCC mixtures for use in cast in place concrete bridge components, thereby facilitating construction, improving the working environment and safety, and reducing cost."--Publisher's description
Download or read book Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete written by and published by . This book was released on 2008-01-01 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Structural Engineering written by Vasant Matsagar and published by Springer. This book was released on 2014-12-12 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.
Download or read book Proceedings of SECON 2020 written by Kaustubh Dasgupta and published by Springer Nature. This book was released on 2020-11-20 with total page 959 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 1st International Conference on Structural Engineering and Construction Management (SECON’20), held in Angamaly, Kerala, India, on 14-15 May 2020. The meeting served as a fertile platform for discussion, sharing sound knowledge and introducing novel ideas on issues related to sustainable construction and design for the future. The respective contributions address various aspects of numerical modeling and simulation in structural engineering, structural dynamics and earthquake engineering, advanced analysis and design of foundations, BIM, building energy management, and technical project management. Accordingly, the book offers a valuable, up-to-date tool and essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.
Download or read book Self compacting Concrete written by Geert De Schutter and published by . This book was released on 2008 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only book to offer a systematic and comprehensive source of information on SCC technology from its inception to latest developments. It is also the first book that enables engineers and architects to readily appreciate the full capabilities and potential of SCC.
Download or read book Advanced Concrete Technology written by Zongjin Li and published by John Wiley & Sons. This book was released on 2011-01-11 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades concrete has enjoyed a renewed level of research and testing, resulting in the development of many new types of concrete. Through the use of various additives, production techniques and chemical processes, there is now a great degree of control over the properties of specific concretes for a wide range of applications. New theories, models and testing techniques have also been developed to push the envelope of concrete as a building material. There is no current textbook which brings all of these advancements together in a single volume. This book aims to bridge the gap between the traditional concrete technologies and the emerging state-of-the-art technologies which are gaining wider use.
Download or read book Fresh Concrete written by P. Bartos and published by Elsevier. This book was released on 2013-10-22 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fresh concrete is generally featured in publications on concrete technology where the focus is often on fundamental rheology or diverse research methods, or the standards describe the tests but do not provide practical advice on interpretation of the results. This book aims to fill the gap between highly scientific and fundamental works and the many fragmented test specifications. It summarises the existing knowledge on the properties of fresh concrete in a form accessible to practicing engineers and concrete technologists. It includes a manual of practical tests which cover both the standard tests in major countries and new tests specifically applicable to site testing. The testing equipment required and the procedures are described in sufficient detail for the tests to be carried out, with references to selected national standards when compliance with specific conditions applicable in those countries is required. Particular attention is paid to properties of special fresh concrete mixes which are increasingly used in practical construction. The work will be of interest to engineers and others involved in the research, development, design and execution of concrete construction, including those working in EEC countries.
Download or read book Timber Bridges written by Michael A. Ritter and published by Datamotion Publishing LLC. This book was released on 1990 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a comprehensive analysis of the design, construction, inspection, and maintenance of timber bridges.
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book The Rheology of Fresh Concrete written by G. H. Tattersall and published by Pitman Advanced Publishing Program. This book was released on 1983 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Microstructure Properties and Materials written by P. Mehta and published by McGraw Hill Professional. This book was released on 2005-09-26 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents the art and science of concrete in a simple, clear, hands-on manner, focusing on the following: Cement and concrete are predicted to be the premier building material of the 21st Century; Includes unique diagrams, photographs, and summary tables; Updated to include new chapters on non-destructive methods for concrete; future challenges in concrete technology; an increased number of examples of concrete applications; and new developments in durability.
Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1988 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for Civil and Construction Engineers Pearson New International Edition written by Michael S. Mamlouk and published by Pearson Higher Ed. This book was released on 2013-08-27 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Civil Engineering Materials, Construction Materials, and Construction Methods and Materials offered in Civil, Environmental, or Construction engineering departments. This introduction gives students a basic understanding of the material selection process and the behavior of materials — a fundamental requirement for all civil and construction engineers performing design, construction, and maintenance. The authors cover the various materials used by civil and construction engineers in one useful reference, limiting the vast amount of information available to the introductory level, concentrating on current practices, and extracting information that is relevant to the general education of civil and construction engineers. A large number of experiments, figures, sample problems, test methods, and homework problems gives students opportunity for practice and review.
Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.
Download or read book Mechanical Behavior of Materials written by Marc A. Meyers and published by . This book was released on 2008 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes numerous examples and problems for student practice, this textbook is ideal for courses on the mechanical behaviour of materials taught in departments of mechanical engineering and materials science.
