Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative and up-to-date series provides a comprehensive review of the latest research results in quantitative nondestructive evaluation (NDE). Leading investigators working in government agencies, major industries, and universities present a broad spectrum of work extending from basic research to early engineering applications.
Download or read book Evaluation of Bridge Deck Delamination Investigation Methods written by Henrique L. M. dos Reis and published by . This book was released on 1998 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: An objective view of the relative advantages and limitations of the nondestructive testing and evaluation methods that are currently used in the inspection of bridge decks is presented and discussed. The three main nondestructive testing technologies that were evaluated are impact-echo, ground penetrating radar, and infrared thermography. Nondestructive testing and evaluation procedures, including methodology and equipment to evaluate concrete bridge decks with asphalt overlays, are also presented and discussed. Current results indicate that a combination of ground penetrating radar and infrared thermography would provide the best methodology for evaluating the structural integrity, e.g., delaminations, of concrete bridge decks with overlays. Furthermore, current results also indicate that the impact-echo method shows promising future development towards the nondestructive evaluation of bridge superstructures.
Download or read book Nondestructive Testing to Identify Concrete Bridge Deck Deterioration written by and published by Transportation Research Board. This book was released on 2013 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: " TRB's second Strategic Highway Research Program (SHRP 2) Report S2-R06A-RR-1: Nondestructive Testing to Identify Concrete Bridge Deck Deterioration identifies nondestructive testing technologies for detecting and characterizing common forms of deterioration in concrete bridge decks.The report also documents the validation of promising technologies, and grades and ranks the technologies based on results of the validations.The main product of this project will be an electronic repository for practitioners, known as the NDToolbox, which will provide information regarding recommended technologies for the detection of a particular deterioration. " -- publisher's description.
Download or read book Manual on Service Life of Corrosion damaged Reinforced Concrete Bridge Superstructure Elements written by Ali Akbar Sohanghpurwala and published by Transportation Research Board. This book was released on 2006 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Subsurface Sensing written by Ahmet S. Turk and published by John Wiley & Sons. This book was released on 2011-07-06 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a solid understanding of the capabilities and limitations of the techniques used for buried object detection. Presenting theory along with applications and the existing technology, it covers the most recent developments in hardware and software technologies of sensor systems with a focus on primary sensors such as Ground Penetrating Radar (GPR) and auxiliary sensors such as Nuclear Quadruple Resonance (NQR). It is essential reading for students, practitioners, specialists, and academicians involved in the design and implementation of buried object detection sensors.
Download or read book Non destructive Testing of Wisconsin Highway Bridges written by Alireza Ghorbanpoor and published by . This book was released on 2005 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non Destructive Assessment of Concrete Structures Reliability and Limits of Single and Combined Techniques written by Denys Breysse and published by Springer Science & Business Media. This book was released on 2012-01-21 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives information on non destructive techniques for assessment of concrete structures. It synthesizes the best of international knowledge about what techniques can be used for assessing material properties (strength) and structural properties (geometry, defects...). It describes how the techniques can be used so as to answer a series of usual questions, highlighting their capabilities and limits, and providing advices for a better use of techniques. It also focuses on possible combinations of techniques so as to improve the assessment. It is based on many illustrative examples and give in each case references to standards and guidelines.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1991 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Artificial Intelligence in Nondestructive Testing of Civil Engineering Materials written by Juncai Xu and published by Frontiers Media SA. This book was released on 2021-11-23 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1991 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Engineering Handbook Five Volume Set written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 3042 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection provides detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject, and also highlights bridges from around the world. This second edition of the bestselling Bridge Engineering Handbook covers virtually all the information an engineer would need to know about any type of bridge-from planning to construction to maintenance. It contains more than 2,500 tables, charts, and illustrations in a practical, ready-to-use format. An abundance of worked-out examples gives readers numerous practical step-by-step design procedures. Special attention is given to rehabilitation, retrofit, and maintenance. Coverage also includes seismic design and building materials. Thoroughly revised and updated, this second edition contains 26 new chapters.
Download or read book Bridge Engineering Handbook Second Edition written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject. Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes contributions by leading experts from around the world in their respective areas of bridge engineering, contains 26 completely new chapters, and updates most other chapters. It offers design concepts, specifications, and practice, as well as the various types of bridges. The text includes over 2,500 tables, charts, illustrations, and photos. The book covers new, innovative and traditional methods and practices; explores rehabilitation, retrofit, and maintenance; and examines seismic design and building materials. The fifth book, Construction and Maintenance contains 19 chapters, and covers the practical issues of bridge structures. What’s New in the Second Edition: Includes nine new chapters: Steel Bridge Fabrication, Cable-Supported Bridge Construction, Accelerated Bridge Construction, Bridge Management Using Pontis and Improved Concepts, Bridge Maintenance, Bridge Health Monitoring, Nondestructive Evaluation Methods for Bridge Elements, Life-Cycle Performance Analysis and Optimization, and Bridge Construction Methods Rewrites the Bridge Construction Inspection chapter and retitles it as: Bridge Construction Supervision and Inspection Expands and rewrites the Maintenance Inspection and Rating chapter into three chapters: Bridge Inspection, Steel Bridge Evaluation and Rating, and Concrete Bridge Evaluation and Rating; and the Strengthening and Rehabilitation chapter into two chapters: Rehabilitation and Strengthening of Highway Bridge Superstructures, and Rehabilitation and Strengthening of Orthotropic Steel Bridge Decks This text is an ideal reference for practicing bridge engineers and consultants (design, construction, maintenance), and can also be used as a reference for students in bridge engineering courses.
Download or read book Waterproofing Membranes for Concrete Bridge Decks written by David G. Manning and published by Transportation Research Board. This book was released on 1995 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to research, specifications, materials, design, and construction engineers; contract and specification administrators; agency project managers and staff; and concrete bridge deck construction contractors. This synthesis describes the state of the practice with respect to the development and present status of waterproofing membranes for concrete bridge decks. This report of the Transportation Research Board describes the use of waterproofing systems applied to new bridge decks and the rehabilitation of deteriorated concrete bridge decks. In addition, this synthesis describes current practice with regard to methods for assessing the effectiveness of membranes, criteria for use, installation practices, and factors that affect the performance of waterproofing systems in new construction and rehabilitation. Suggestions for future research are also included.
Download or read book Non Destructive Evaluation of Reinforced Concrete Structures written by Christiane Maierhofer and published by Elsevier. This book was released on 2010-07-27 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers have a range of sophisticated techniques at their disposal to evaluate the condition of reinforced concrete structures and non-destructive evaluation plays a key part in assessing and prioritising where money should be spent on repair or replacement of structurally deficient reinforced concrete structures. Non-destructive evaluation of reinforced concrete structures, Volume 2: Non-destructive testing methods reviews the latest non-destructive testing techniques for reinforced concrete structures and how they are used.Part one discusses planning and implementing non-destructive testing of reinforced concrete structures with chapters on non-destructive testing methods for building diagnosis, development of automated NDE systems, structural health monitoring systems and data fusion. Part two reviews individual non-destructive testing techniques including wireless monitoring, electromagnetic and acoustic-elastic waves, laser-induced breakdown spectroscopy, acoustic emission evaluation, magnetic flux leakage, electrical resistivity, capacimetry, measuring the corrosion rate (polarization resistance) and the corrosion potential of reinforced concrete structures, ground penetrating radar, radar tomography, active thermography, nuclear magnetic resonance imaging, stress wave propagation, impact-echo, surface and guided wave techniques and ultrasonics. Part three covers case studies including inspection of concrete retaining walls using ground penetrating radar, acoustic emission and impact echo techniques and using ground penetrating radar to assess an eight-span post-tensioned viaduct.With its distinguished editor and international team of contributors, Non-destructive evaluation of reinforced concrete structures, Volume 2: Non-destructive testing methods is a standard reference for civil and structural engineers as well as those concerned with making decisions regarding the safety of reinforced concrete structures. - Reviews the latest non-destructive testing (NDT) techniques and how they are used in practice - Explores the process of planning a non-destructive program features strategies for the application of NDT testing - A specific section outlines significant advances in individual NDT techniques and features wireless monitoring and electromagnetic and acoustic-elastic wave technology
Download or read book Structural Materials Technology written by Sreenivas Alampalli and published by CRC Press. This book was released on 2000-02-29 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth Structural Materials Technology NDT Conference was held in Atlantic City, New Jersey, with over sixty speakers presenting on a wide variety of topics. The goal of this conference was to inform engineers and researchers of the new nondestructive testing/nondestructive evaluation (NDT/NDE) technologies and techniques available for use in transportation construction. The use of alternative materials is challenging NDT/NDE professionals to develop new methods or modify existing techniques to address quality control, quality assurance, and long-term monitoring of structures built or strengthened with these materials. One such alternative is fiber-reinforced polymer (FRP) products. This conference included papers on this topic and a panel discussion that focused on the future of NDT/NDE technologies for structures built or rehabilitated with FRP composites. These proceedings contain the 62 papers that were presented at the conference, arranged according to session number. An author index is included.
Download or read book Birth Certificate and Through Life Management Documentation written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2020-06-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: While it is generally accepted by owners and users that vehicles such as airplanes or cars must be subjected to a pre-defined maintenance plan during their lifetime, this is less obvious in public opinion for engineering structures and buildings. This may be related to the general feeling that “moving objects” should be more sensitive to aging and deterioration than “structures anchored in ground”! This may also relate to the fact that detailed maintenance manuals, which are considered obligatory by insurance companies, are generally for aircraft, boats and cars, but not systematically for civil engineering structures, except for iconic or major projects. The performance-based approach to the durability design and assessment of concrete structures is also becoming increasingly popular in the construction sector. In recent years, numerous studies have been carried out worldwide in order to better assess the expected properties related to the durability of concrete. This has led to the standardization of test protocols, but also to a better understanding of the main parameters impacting the overall durability of concrete. Documentation related to durability indicators will then become increasingly necessary for the accurate implementation of a performance-based approach that enables the promotion of sustainable materials. Durability models have a strong need for relevant in-field data feedback in order to define accurate inputs for modelling both during the design process (gathered from previous projects) and during the follow-up process to allow for re-calibration of inputs and re-assessment of durability expectations by the models if judged necessary. A framework for data collection was therefore considered extremely importance by the fib Commission 8: Durability, and is the objective of this fib Technical report “Birth-certificate and Through-Life Management Documentation”. It is indeed very important to collect relevant data within a comprehensive and standardized format, as now proposed by this fib Bulletin. Thanks to its pre-defined format, compatible with the general fib framework, “Birth-certificate and Through-Life Management Documentation” will definitively be useful to owners for the maintenance plan and intervention strategies of their assets. This operational technical report will also be very useful for designers, as it should encourage the collection of relevant information in databases to be used for future projects where a realistic assessment of expected properties is considered through largely similar concrete mix designs under given exposure conditions. The Commission, which deals with durability aspects, hopes that this Bulletin will provide users a valuable tool and perspective on service life management issues.
Download or read book Life Cycle Analysis and Assessment in Civil Engineering Towards an Integrated Vision written by Robby Caspeele and published by CRC Press. This book was released on 2018-10-31 with total page 3160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at IALCCE2018, the Sixth International Symposium on Life-Cycle Civil Engineering (IALCCE2018), held in Ghent, Belgium, October 28-31, 2018. It consists of a book of extended abstracts and a USB device with full papers including the Fazlur R. Khan lecture, 8 keynote lectures, and 390 technical papers from all over the world. Contributions relate to design, inspection, assessment, maintenance or optimization in the framework of life-cycle analysis of civil engineering structures and infrastructure systems. Life-cycle aspects that are developed and discussed range from structural safety and durability to sustainability, serviceability, robustness and resilience. Applications relate to buildings, bridges and viaducts, highways and runways, tunnels and underground structures, off-shore and marine structures, dams and hydraulic structures, prefabricated design, infrastructure systems, etc. During the IALCCE2018 conference a particular focus is put on the cross-fertilization between different sub-areas of expertise and the development of an overall vision for life-cycle analysis in civil engineering. The aim of the editors is to provide a valuable source of cutting edge information for anyone interested in life-cycle analysis and assessment in civil engineering, including researchers, practising engineers, consultants, contractors, decision makers and representatives from local authorities.