Download or read book Designers Guide to Eurocode 4 Design of Composite Structures EN 1994 2 written by Chris R Hendy and published by Thomas Telford. This book was released on 2006-08-23 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: EN 1994-2 is one standard of the Eurocode suite & describes the principles & requirements for safety, serviceability & durability of composite steel & concrete bridges. This guide provides the user with guidance on the interpretation & use of EN 1994-2 through worked examples in relation to the general rules & the rules for bridges.
Download or read book Designers Guide to EN 1991 1 2 EN 1992 1 2 EN 1993 1 2 and EN 1994 1 2 written by Tom Lennon and published by Thomas Telford. This book was released on 2007-01-12 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to 4 documents, EN1991 Part 1.2, EN1992 Part 1.2, EN1993 Part 1.2 and EN1994 Part 1.2. It provides an introduction to the procedures required to achieve design solutions for a typical range of structural elements and assemblies. Worked examples are included to illustrate the use of the Eurocodes for specific design scenarios.
Download or read book Composite Structures of Steel and Concrete written by Roger P. Johnson and published by John Wiley & Sons. This book was released on 2018-08-21 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to the theory and design of composite structures of steel and concrete. Material applicable to both buildings and bridges is included, with more detailed information relating to structures for buildings. Throughout, the design methods are illustrated by calculations in accordance with the Eurocode for composite structures, EN 1994, Part 1-1, ‘General rules and rules for buildings’ and Part 1-2, ‘Structural fire design’, and their cross-references to ENs 1990 to 1993. The methods are stated and explained, so that no reference to Eurocodes is needed. The use of Eurocodes has been required in the UK since 2010 for building and bridge structures that are publicly funded. Their first major revision began in 2015, with the new versions due in the early 2020s. Both authors are involved in the work on Eurocode 4. They explain the expected additions and changes, and their effect in the worked examples for a multi-storey framed structure for a building, including resistance to fire. The book will be of interest to undergraduate and postgraduate students, their lecturers and supervisors, and to practising engineers seeking familiarity with composite structures, the Eurocodes, and their ongoing revision.
Download or read book Composite Construction in Steel and Concrete 9 written by Markus Knobloch and published by John Wiley & Sons. This book was released on 2024-09-03 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Construction in Steel and Concrete IX The highly successful International Conference series on Composite Construction in Steel and Concrete is a major forum for researchers, practitioners, and engineers to share and discuss their research, practical experience and innovations related to composite constructions in steel and concrete. Composite Construction is a key consideration in the design of buildings and infrastructure. Significant advances in research and development have increased the knowledge of the structural performance of composite structures. Some areas are becoming well understood and implemented in the design practice, codes and standards worldwide, while others like, e.g., application of high-performance materials or dismountable and reusable composite members need further studies; trends that are reflected by the conference papers. The 62 contributions contained in this book cover a wide variety of topics, including composite beams, composite columns, composite decks, joints, shear connections, fire behavior, seismic behavior, fatigue and fracture, codification, composite bridges, innovative hybrid structures, numerical investigations and practical applications. The Papers are peer-reviewed by the Scientific Board and may be adapted based on the outcome of the discussions during the conference. This book therefore summarizes the state-of-the-art in composite construction worldwide, as presented at the 9th International Conference on Composite Construction in Steel and Concrete hosted by the Ruhr-Universität Bochum, University of Stuttgart, RPTU Kaiserslautern-Landau and University of Luxembourg, representing the work of authors from 18 countries.
Download or read book Design of Joints in Steel and Composite Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2016-06-22 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the basic concepts and the design rules included in Eurocode 3 Design of steel structures: Part 1-8 Design of joints Joints in composite construction are also addressed through references to Eurocode 4 Design of composite steel and concrete structures Part 1-1: General rules and rules for buildings. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.
Download or read book Fire Design of Steel Structures written by Jean-Marc Franssen and published by John Wiley & Sons. This book was released on 2012-06-04 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains and illustrates the rules that are given in the Eurocode for designing steel structures subjected to fire. After the first introductory chapter, Chapter 2 explains how to calculate the mechanical actions (loads) in the fire situation based on the information given in EN 1990 and EN 1991. Chapter 3 presents the models to be used to represent the thermal action created by the fire. Chapter 4 describes the procedures to be used to calculate the temperature of the steelwork from the temperature of the compartment and Chapter 5 shows how the information given in EN 1993-1-2 is used to determine the loan bearing capacity of the steel structure. The methods use to evaluate the fire resistance of bolted and welded connections are described in Chapter 7. Chapter 8 describes a computer program called "Elefir-EN" which is based on the simple calculation model given in the Eurocode and allows designers to quickly and accurately calculate the performance of steel components in the fire situation. Chapter 9 looks at the issues that a designer may be faced with when assessing the fire resistance of a complete building. This is done via a case study and addresses most of the concepts presented in the earlier Chapters. The concepts and fire engineering procedures given in the Eurocodes may see complex those more familiar with the prescriptive approach. This publication sets out the design process in a logical manner giving practical and helpful advice and easy to follow worked examples that will allow designer to exploit the benefits of this new approach to fire design.
Download or read book Designers Guide to EN 1992 1 1 Eurocode 2 Design of Concrete Structures written by Andrew W Beeby and published by Thomas Telford. This book was released on 2005-09-30 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applies to the design of building and civil engineering structures in plain, reinforced and pre-stressed concrete. The code (for convenience referred to as EC2) is written in several parts: EN 1992 - 1 - 1; EN 1992 - 1 - 2; EN 1992 - 2; and EN 1992 - 3.
Download or read book Designers Handbook to Eurocode 1 Basis of design written by H. Gulvanessian and published by Thomas Telford. This book was released on 1996 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing detailed information for civil and structural engineers on the use of Eurocode, this handbook covers the basis of design, its background and relationship to the other Eurocodes. This Eurocode provides general principles for the structural design
Download or read book Design of Joints in Steel Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2017-06-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the basic concepts and the design rules included in Eurocode 3 "Design of steel structures" Part 1-8 "Design of joints". Joints in composite construction are also addressed through references to Eurocode 4 "Design of composite steel and concrete structures" Part 1-1 "General rules and rules for buildings". Moreover, the relevant UK National Annexes are also taken into account. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2019-08-28 with total page 1184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new sixth edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy-saving building components.
Download or read book Tubular Structures XII written by Z.Y. Shen and published by CRC Press. This book was released on 2008-09-11 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presentation of the latest scientific and engineering developments in the field of tubular steel structures. Covers key and emerging subjects of hollow structural sections, such as: static and fatigue behaviour of connections/joints, concrete filled hollow sections and composite tubular members, offshore structures, earthquake resistance,
Download or read book Refurbishment Manual written by Georg Giebeler and published by Walter de Gruyter. This book was released on 2012-12-10 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Planning tasks involving existing structures are currently among the most common types of contract, and almost every structure makes different demands and raises individual problems. Reflecting this state of affairs, there are a dizzying number of publications on the market, most of which are quite specialized. The Refurbishment Manual cuts through this jungle of publications. It defines terms and concepts, combines the narrowly focused perspectives of the specialists, and offers concrete approaches to this wide-ranging topic. The Refurbishment Manual closes the gap between basic constructional literature and one-sided, highly specialized technical literature. It constitutes a practical planning aid on the subject of refurbishment, providing a basic introduction to the relevant aspects of building physics, fire protection, sustainability and energy, hazardous materials, construction materials for interior and façade, historic preservation, and technical building equipment. It offers concrete tips on planning steps, methods of building analysis, and cost benchmarks, as well as clear constructional solutions with built projects as examples. A unique feature of the volume is the specially developed timeline, which allows the planner to quickly grasp, categorize, and evaluate a concrete building task and thus obtain an efficient planning overview. Planungsaufgaben im Bestand gehören derzeit zu den häufigsten Auftragsarten und nahezu jedes Bauwerk stellt andere Anforderungen und weist individuelle Probleme auf. Analog dazu gibt es auf dem Markt eine fast unüberschaubare Anzahl Publikationen in meist sehr spezialisierter Form. Der Sanierungsatlas möchte Licht in diesen Publikationsdschungel bringen: Er definiert Begrifflichkeiten, vereint die fokussierenden Betrachtungsweisen der Fachleute und vermittelt konkrete Herangehensweisen an diese weit gefächerte Thematik. Der Sanierungsatlas schließt die Lücke zwischen grundlegender Baukonstruktions- und sehr einseitig spezialisierter Fachliteratur. Das Buch stellt eine praktische Planungshilfe zum Thema Sanierung dar – und zwar in Form von relevanter Grundlagenvermittlung zu Bauphysik, Brandschutz, Nachhaltigkeits- und energetischen Aspekten, Schadstoffen, Baustoffen im Innenraum und an der Fassade, zu Aspekten der Denkmalpflege ebenso wie zur technischen Gebäudeausstattung. Er liefert konkrete Hinweise zu Planungsschritten, Methoden der Bauanalyse und Kostenkennwerten sowie anschauliche Konstruktionslösungen am Beispiel gebauter Projekte. Einzigartig ist die speziell entwickelte Zeitschiene, mit deren Hilfe eine konkrete Bauaufgabe schnell erfasst, kategorisiert und bewertet werden kann – und die dem Planer somit einen effizienten Planungsüberblick verschafft.
Download or read book Design and Optimization of Metal Structures written by J Farkas and published by Horwood Publishing. This book was released on 2008-04 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: An industrial book that analyses various theoretical problems, optimizes numerical applications and addresses industrial problems such as belt-conveyor bridge, pipeline, wind turbine power, large-span suspended roof and offshore jacket member. Multi-storey frames and pressure vessel-supporting frames are discussed in detail. The book's emphasis is on economy and cost calculation, making it possible to compare costs and make significant savings in the design stages, by, for example, comparing the costs of stiffened and un-stiffened structural versions of plates and shells. In this respect, this book will be an invaluable aid for designers, students, researchers and manufacturers to find better, optimal, competitive structural solutions. Emphasis is placed on economy and cost calculation, making it possible to compare costs and make significant savings in the design stages of metal structures Optimizes numerical applications and analyses various theoretical and industrial problems, such as belt-conveyor bridge, pipeline, wind turbine power, large-span suspended roof and offshore jacket member An invaluable aid for designers, students, researchers and manufacturers to find better, optimal, competitive structural solutions
Download or read book Urban Habitat Constructions Under Catastrophic Events written by Federico M. Mazzolani and published by CRC Press. This book was released on 2010-08-27 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: COST is an intergovernmental framework for European Cooperation in Science and Technology, allowing the coordination of nationally-funded research on a European level. Part of COST was COST Action C26Urban Habitat Constructions Under Catastrophic Events which started in 2006 and held its final conference in Naples, Italy, on 16-18 September 201
Download or read book Fire Safety Design for Tall Buildings written by Feng Fu and published by CRC Press. This book was released on 2021-02-18 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire Safety Design for Tall Buildings provides structural engineers, architects, and students with a systematic introduction to fire safety design for tall buildings based on current analysis methods, design guidelines, and codes. It covers almost all aspects of fire safety design that an engineer or an architect might encounter—such as performance-based design and the basic principles of fire development and heat transfer. It also sets out an effective way of preventing the progressive collapse of a building in fire, and it demonstrates 3D modeling techniques to perform structural fire analysis with examples that replicate real fire incidents such as the Twin Towers and WTC7. This helps readers to understand the design of structures and analyze their behavior in fire.
Download or read book Design and Analysis of Tall and Complex Structures written by Feng Fu and published by Butterworth-Heinemann. This book was released on 2018-02-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of tall buildings and complex structures involves challenging activities, including: scheme design, modelling, structural analysis and detailed design. This book provides structural designers with a systematic approach to anticipate and solve issues for tall buildings and complex structures. This book begins with a clear and rigorous exposition of theories behind designing tall buildings. After this is an explanation of basic issues encountered in the design process. This is followed by chapters concerning the design and analysis of tall building with different lateral stability systems, such as MRF, shear wall, core, outrigger, bracing, tube system, diagrid system and mega frame. The final three chapters explain the design principles and analysis methods for complex and special structures. With this book, researchers and designers will find a valuable reference on topics such as tall building systems, structure with complex geometry, Tensegrity structures, membrane structures and offshore structures. - Numerous worked-through examples of existing prestigious projects around the world (such as Jeddah Tower, Shanghai Tower, and Petronas Tower etc.) are provided to assist the reader's understanding of the topic - Provides the latest modelling methods in design such as BIM and Parametric Modelling technique - Detailed explanations of widely used programs in current design practice, such as SAP2000, ETABS, ANSYS, and Rhino - Modelling case studies for all types of tall buildings and complex structures, such as: Buttressed Core system, diagrid system, Tube system, Tensile structures and offshore structures etc.
Download or read book Fatigue Design of Steel and Composite Structures written by Alain Nussbaumer and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.
