Download or read book Structural Steel Design to Eurocode 3 and AISC Specifications written by Claudio Bernuzzi and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Steel Design to Eurocode 3 and AISC Specifications deals with the theory and practical applications of structural steel design in Europe and the USA. The book covers appropriate theoretical and background information, followed by a more design‐oriented coverage focusing on European and United States specifications and practices, allowing the reader to directly compare the approaches and results of both codes. Chapters follow a general plan, covering: A general section covering the relevant topics for the chapter, based on classical theory and recent research developments A detailed section covering design and detailing to Eurocode 3 specification A detailed section covering design and detailing to AISC specifications Fully worked examples are using both codes are presented. With construction companies working in increasingly international environments, engineers are more and more likely to encounter both codes. Written for design engineers and students of civil and structural engineering, this book will help both groups to become conversant with both code systems.

Download or read book Design of Steel Structures to Eurocodes written by Ioannis Vayas and published by Springer. This book was released on 2018-11-23 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes.

Download or read book Structural Engineer s Pocket Book Eurocodes written by Fiona Cobb and published by CRC Press. This book was released on 2014-11-11 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functions as a Day-to-Day Resource for Practicing Engineers The hugely useful Structural Engineer's Pocket Book is now overhauled and revised in line with the Eurocodes. It forms a comprehensive pocket reference guide for professional and student structural engineers, especially those taking the IStructE Part 3 exam. With stripped-down basic materi

Download or read book Tubular Structures XI written by JeffreyA. Packer and published by Routledge. This book was released on 2017-10-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: This topical book contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the "11th International Symposium and IIW International Conference on Tubular Structures". The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the prime international forum for discussion of research, developments and applications in this field. Various key and emerging subjects in the field of hollow structural sections are covered, such as: novel applications and case studies, static and fatigue behaviour of connections/joints, concrete-filled and composite tubular members, earthquake resistance, specification and code developments, material properties and structural reliability, impact resistance and brittle fracture, fire resistance, casting and fabrication innovations. Research and development issues presented in this book are applicable to buildings, bridges, offshore structures, entertainment rides, cranes, towers and various mechanical and agricultural equipment. This book is thus a pertinent reference source for architects, civil and mechanical engineers, designers, steel fabricators and contractors, manufacturers of hollow sections or related construction products, trade associations involved with tubing, owners or developers of tubular structures, steel specification committees, academics and research students. The conference presentations herein include two keynote lectures (the International Institute of Welding Houdremont Lecture and the ISTS Kurobane Lecture), plus finalists in the CIDECT Student Papers Competition. The 11th International Symposium and IIW International Conference on Tubular Structures – ISTS11 – took place in Québec City, Canada from August 31 to September 2, 2006.

Download or read book Fatigue Design of Steel and Composite Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2018-06-05 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.

Download or read book Stability and Ductility of Steel Structures 2019 written by František Wald and published by CRC Press. This book was released on 2019-08-30 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than forty years the series of International Colloquia on Stability and Ductility of Steel Structures has been supported by the Structural Stability Research Council (SSRC). Its objective is to present the latest results in theoretical, numerical and experimental research in the area of stability and ductility of steel and steel-concrete composite structures. In Stability and Ductility of Steel Structures 2019, the focus is on new concepts and procedures concerning the analysis and design of steel structures and on the background, development and application of rules and recommendations either appearing in recently published Codes or Specifications and in emerging versions, all in anticipation of the new edition of Eurocodes. The series of International Colloquia on Stability and Ductility of Steel Structures started in Paris in 1972, the last five being held in: Timisoara, Romania (1999), Budapest, Hungary (2002), Lisbon, Portugal (2006), Rio de Janeiro, Brazil (2010) and Timisoara, Romania (2016). The 2019 edition of SDSS is organized by the Czech Technical University in Prague.

Download or read book Design of Steel Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2014-01-22 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the design concept of Eurocode 3 for steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will provide for a smooth transition from earlier national codes to the Eurocode.

Download or read book Fire Design of Steel Structures written by Jean-Marc Franssen and published by John Wiley & Sons. This book was released on 2016-10-10 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains and illustrates the rules that are given in the Eurocodes for designing steel structures subjected to fire. After the first introductory chapter, Chapter 2 explains how to calculate the mechanical actions (loads) in the fire situation based on the information given in EN 1990 and EN 1991. Chapter 3 is dedicated to the models which represent the thermal actions created by the fire. Chapter 4 describes the procedures to be used to calculate the temperature of the steelwork from the temperature of the compartment and Chapter 5 shows how the information given in EN 1993-1-2 is used to determine the load bearing capacity of the steel structure. Chapter 6 presents the essential features that characterize the advanced calculation models, for thermal and mechanical response. The methods used to evaluate the fire resistance of bolted and welded connections are described in Chapter 7. Chapter 8 describes a computer program called `Elefir-EN? which is based on the simple calculation model given in the Eurocode and allows designers to quickly and accurately calculate the performance of steel components in the fire situation. Chapter 9 looks at the issues that a designer may be faced with when assessing the fire resistance of a complete building. This is done via a case study and addresses most of the concepts presented in the previous chapters. For this second edition the content has been revised and extended. The book contains some new sections, e.g. a comparison between the simple and the advanced calculation, as well as additional examples.

Download or read book Handbook of International Bridge Engineering written by Wai-Fah Chen and published by CRC Press. This book was released on 2013-10-11 with total page 1383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and up-to-date reference work and resource book covers state-of-the-art and state-of-the-practice for bridge engineering worldwide. Countries covered include Canada and the United States in North America; Argentina and Brazil in South America; Bosnia, Bulgaria, Croatia, Czech Republic, Denmark, Finland, France, Greece, Macedonia,

Download or read book Concrete Filled Stainless Steel Tubular Columns written by Vipulkumar Patel and published by CRC Press. This book was released on 2018-12-07 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete-filled stainless steel tubular (CFSST) columns are increasingly used in modern composite construction due to their high strength, high ductility, high corrosion resistance, high durability and aesthetics and ease of maintenance. Thin-walled CFSST columns are characterized by the different strain-hardening behavior of stainless steel in tension and in compression, local buckling of stainless steel tubes and concrete confinement. Design codes and numerical models often overestimate or underestimate the ultimate strengths of CFSST columns. This book presents accurate and efficient computational models for the nonlinear inelastic analysis and design of CFSST short and slender columns under axial load and biaxial bending. The effects of different strain-hardening characteristics of stainless steel in tension and in compression, progressive local and post-local buckling of stainless steel tubes and concrete confinement are taken into account in the computational models. The numerical models simulate the axial load-strain behavior, moment-curvature curves, axial load-deflection responses and axial load-moment strength interaction diagrams of CFSST columns. The book describes the mathematical formulations, computational procedures and model verifications for circular and rectangular CFSST short and slender columns. The behavior of CFSST columns under various loading conditions is demonstrated by numerous numerical examples. This book is written for practising structural and civil engineers, academic researchers and graduate students in civil engineering who are interested in the latest computational techniques and design methods for CFSST columns.

Download or read book Current Perspectives and New Directions in Mechanics Modelling and Design of Structural Systems written by Alphose Zingoni and published by CRC Press. This book was released on 2022-09-02 with total page 4438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems comprises 330 papers that were presented at the Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022, Cape Town, South Africa, 5-7 September 2022). The topics featured may be clustered into six broad categories that span the themes of mechanics, modelling and engineering design: (i) mechanics of materials (elasticity, plasticity, porous media, fracture, fatigue, damage, delamination, viscosity, creep, shrinkage, etc); (ii) mechanics of structures (dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) numerical modelling and experimental testing (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber); (v) innovative concepts, sustainable engineering and special structures (nanostructures, adaptive structures, smart structures, composite structures, glass structures, bio-inspired structures, shells, membranes, space structures, lightweight structures, etc); (vi) the engineering process and life-cycle considerations (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). Two versions of the papers are available: full papers of length 6 pages are included in the e-book, while short papers of length 2 pages, intended to be concise but self-contained summaries of the full papers, are in the printed book. This work will be of interest to civil, structural, mechanical, marine and aerospace engineers, as well as planners and architects.

Download or read book Geopolymer Concrete Structures with Steel and FRP Reinforcements written by Mohamed Elchalakani and published by Elsevier. This book was released on 2023-02-15 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geopolymer Concrete Structures with Steel and FRP Reinforcements: Analysis and Design focuses on structural behavior, including the aspects of compression, bending strength and combined action of GPC members, with the book's content based on published studies over the last two decades. Geopolymer concrete (GPC) structural members reinforced with FRP reinforcement have some advantages in resisting forces compared to conventional concrete or steel tubular members. Among the most important are the high strength and bending stiffness, fire and impact performance and favorable, construction ability and durability. To this end, there are no significant applications of these new structural elements worldwide, partly due to the lack of the understanding of their behavior and insufficient design provisions in different design manuals. This book, therefore, seeks to highlight their characteristics and future potential. - Provides comprehensive, up-to-date advances on Geopolymer Concrete (GPC) reinforced with steel and FRP bars and stirrups construction with a summary of over 100 papers published in the last decade - Compares the behavior and failure modes between Geopolymer Concrete (GPC) structures and Ordinary Portland Concrete (OPC) structures - Explains important concepts such as bond, confinement, fracture of stirrups and buckling of FRP bars - Includes an in-depth analysis of ultimate strength of GPC and OPC, considering governing failure modes - Presents design examples following international standards, including North America ACI 440.1R-15, Canadian CAN/CSA S806, and Australian such as AS 3600

Download or read book Design of Structural Elements written by Chanakya Arya and published by CRC Press. This book was released on 2022-04-26 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of Design of Structural Elements: Concrete, Steelwork, Masonry and Timber Designs to Eurocodes is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry and composites. It provides design principles and guidance in line with Eurocodes, current as of 2021. Topics include the philosophy of design, sustainable development, basic structural concepts, and material properties. After an overview of structural design, the book contains self-contained chapters with numerous diagrams and worked examples on design in reinforced concrete, structural steelwork and steel/concrete composites, masonry and timber based on EN 1990-1997. Selected extracts from these publications assist familiarity. Elements considered cover reinforced concrete and composite floors, isolated foundation, cantilever retaining wall, load-bearing and panel walls, stud wall and connections. The text is ideal for student civil and structural engineers on degree and diploma courses, and also practising civil and structural engineers and other built environment professions. The online Support Materials for adopting course instructors includes an extensive set of solutions to the problems in the book and PowerPoint slides for use in lectures: www.routledge.com/9781032076317.

Download or read book Decoding Eurocode 7 written by Andrew Bond and published by CRC Press. This book was released on 2008-08-29 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decoding Eurocode 7 provides a detailed examination of Eurocode 7 Parts 1 and 2 and an overview of the associated European and International standards. The detail of the code is set out in summary tables and diagrams, with extensive. Fully annotated worked examples demonstrate how to apply it to real designs. Flow diagrams explain how reliability is introduced into design and mind maps gather related information into a coherent framework. Written by authors who specialise in lecturing on the subject, Decoding Eurocode 7 explains the key principles and application rules of Eurocode 7 in a logical and simple manner. Invaluable for practitioners, as well as for high-level students and researchers working in geotechnical fields.

Download or read book Light Weight Steel and Aluminium Structures written by P. Mäkeläinen and published by Elsevier. This book was released on 1999-06-02 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICSAS '99 - The Fourth International Conference on Steel and Aluminium Structures was a sequel to ICSAS '87 held in Cardiff, UK, to ICSAS '91 held in Singapore and to ICSAS '95 held in Istanbul, Turkey. The objective of the conference was to provide a forum for the discussion of recent findings and developments in the design and construction of various types of steel and aluminium structures.The conference was concerned with the analysis, modelling and design of light-weight or slender structures in which the primary material is structural steel, stainless or aluminium. The structural analysis papers presented at the conference cover both static and dynamic behaviour, instability behaviour and long-term behaviour under hygrothermal effects. The results of the latest research and development of some new structural products were also presented at the conference. A total of 76 papers and 30 posters were presented at the conference by participants from 36 countries in all 6 continents.

Download or read book Space Structures 5 written by G. A. R. Parke and published by Thomas Telford. This book was released on 2002 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings are based on the Fifth International Conference on Space Structures, organised by the University of Surrey. Produced as a 2-volume set, they contain original and innovative information on space structures from leading engineers and architects from around the world.

Download or read book Design of Steel Structures written by Luís Simões da Silva and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.