Download or read book Reinforced Concrete Design to Eurocode 2 written by Giandomenico Toniolo and published by Springer. This book was released on 2017-05-09 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the basic mechanical features of concrete and explains the main resistant mechanisms activated in the reinforced concrete structures and foundations when subjected to centred and eccentric axial force, bending moment, shear, torsion and prestressing. It presents a complete set of limit-state design criteria of the modern theory of RC incorporating principles and rules of the final version of the official Eurocode 2. This textbook examines methodological more than notional aspects of the presented topics, focusing on the verifications of assumptions, the rigorousness of the analysis and the consequent degree of reliability of results. Each chapter develops an organic topic, which is eventually illustrated by examples in each final paragraph containing the relative numerical applications. These practical end-of-chapter appendices and intuitive flow-charts ensure a smooth learning experience. The book stands as an ideal learning resource for students of structural design and analysis courses in civil engineering, building construction and architecture, as well as a valuable reference for concrete structural design professionals in practice.
Download or read book Designers Guide to EN 1992 1 1 Eurocode 2 Design of Concrete Structures written by Andrew W Beeby and published by Thomas Telford. This book was released on 2005-09-30 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applies to the design of building and civil engineering structures in plain, reinforced and pre-stressed concrete. The code (for convenience referred to as EC2) is written in several parts: EN 1992 - 1 - 1; EN 1992 - 1 - 2; EN 1992 - 2; and EN 1992 - 3.
Download or read book Reinforced Concrete Design written by W.H. Mosley and published by Red Globe Press. This book was released on 2012-04-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this text is to provide a straightforward introduction to the principles and methods of design for concrete structures. The theory and practice described are of fundamental nature and will be of use internationally.
Download or read book Eurocode 2 written by British Standards Institution and published by . This book was released on 2004 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings, Structural design, Structural systems, Concretes, Structures, Design, Reinforced concrete, Prestressed concrete, Precast concrete, Factor of safety, Durability, Design calculations, Prestressing steels, Structural members, Fire resistance, Construction materials, Safety measures, Approval testing, Serviceability limits, Tendons, Reinforcement, Lightweight aggregates, Aggregates
Download or read book Worked Examples for the Design of Concrete Structures to Eurocode 2 written by Tony Threlfall and published by CRC Press. This book was released on 2013-06-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical design guide illustrates through worked examples how Eurocode 2 may be used in practice. Complete and detailed designs of six archetypal building and public utility structures are provided. The book caters to students and engineers with little or no practical experience of design, as well as to more experienced engineers who may be u
Download or read book Introduction to Eurocode 2 written by A. Alexandrou and published by CRC Press. This book was released on 1997-10-16 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and practical introduction to the new European Code of Practice for Design of Concrete Structures, EC2. This book guides the reader through the background to the Eurocodes and explains the main differences between them and the equivalent Standard Codes of Practice. An Introduction to Eurocode 2 will be invaluable for engineers who need to
Download or read book Designers Guide to EN 1992 2 Eurocode 2 Design of Concrete Structures Part 2 Concrete Bridges written by Chris R Hendy and published by Thomas Telford. This book was released on 2007-01-08 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation - Basis of design - Materials - Durability - Structural analysis - Ultimate limit states - Serviceability limit states - Detailing of reinforcement and prestressing tendons - Detailing for members and particular rules - Additional rules for precast concrete structures - Design for the execution stages.
Download or read book Worked Examples for the Design of Concrete Structures to Eurocode 2 written by Tony Threlfall and published by CRC Press. This book was released on 2013-06-20 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical design guide illustrates through worked examples how Eurocode 2 may be used in practice. Complete and detailed designs of six archetypal building and public utility structures are provided. The book caters to students and engineers with little or no practical experience of design, as well as to more experienced engineers who may be unfamiliar with Eurocode 2. Chapter 1 provides an introduction to the Structural Eurocodes, with particular reference to actions on structures. Chapter 2 describes the principles, requirements and methods used for the design of members. This is followed by worked examples for the following structures: A multi-storey office building with three forms of floor construction A basement to the office building with three types of foundations A free-standing cantilever earth-retaining wall A large underground service reservoir An open-top rectangular tank on an elastic soil An open-top cylindrical tank on an elastic soil In addition to the design of all the elements, the analysis of each structure is fully explained. This applies particularly to the design of the basement, and the tanks bearing on elastic soils, for which specially derived tables are included in appendices to the book. The calculations are complemented by reinforcement drawings in accordance with the recommendations in the third edition (2006) of the Standard method of detailing structural concrete, with commentaries on the bar arrangements. This book can be used as a stand-alone publication, or as a more detailed companion to Reynolds’s Reinforced Concrete Designer’s Handbook, now in its 11th edition. The comprehensive treatment of the designs, and the variety of structures considered, make this a unique and invaluable work.
Download or read book Designers Handbook to Eurocode 2 written by A. W. Beeby and published by Thomas Telford. This book was released on 1995 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook aims to assist designers to apply Eurocode 2 by explaining the background to, and the intention of, the provisions indicating the most convenient design approaches, comparing the provisions with those in BS 8110 presenting design aids, charts and examples.
Download or read book Design of Prestressed Concrete to Eurocode 2 Second Edition written by Raymond Ian Gilbert and published by CRC Press. This book was released on 2017-01-27 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of structures in general, and prestressed concrete structures in particular, requires considerably more information than is contained in building codes. A sound understanding of structural behaviour at all stages of loading is essential. This textbook presents a detailed description and explanation of the behaviour of prestressed concrete members and structures both at service loads and at ultimate loads and, in doing so, provide a comprehensive and up-to-date guide to structural design. Much of the text is based on first principles and relies only on the principles of mechanics and the properties of concrete and steel, with numerous worked examples. However, where the design requirements are code specific, this book refers to the provisions of Eurocode 2: Design of Concrete Structures and, where possible, the notation is the same as in Eurocode 2. A parallel volume is written to the Australian Standard for Concrete Structures AS3600-2009. The text runs from an introduction to the fundamentals to in-depth treatments of more advanced topics in modern prestressed concrete structures. It suits senior undergraduate and graduate students and also practising engineers who want comprehensive introduction to the design of prestressed concrete structures. It retains the clear and concise explanations and the easy-to-read style of the first edition, but the content has been extensively re-organised and considerably expanded and updated. New chapters cover design procedures, actions and loads; prestressing systems and construction requirements; connections and detailing; and design concepts for prestressed concrete bridges. The topic of serviceability is developed extensively throughout. All the authors have been researching and teaching the behaviour and design of prestressed concrete structures for over thirty-five years and the proposed new edition of the book reflects this wealth of experience. The work has also gained much from Professor Gilbert active and long-time involvement in the development of standards for concrete buildings and concrete bridges.
Download or read book Design Aids for Eurocode 2 written by The Concrete Societies of The UK, The Netherlands and Germany and published by CRC Press. This book was released on 2003-09-02 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eurocode 2 is the key document for future structural design in concrete throughout Europe. To use the Code effectively, structural engineers need a range of aids in the form of flow charts, design charts and simplified procedures. This book provides all of these, and is written with the authority of collaborative work by members of the Concrete Societies of the UK, the Netherlands and Germany. The preparation of the book has been funded under the SPRINT European Community programme for innovation and technology transfer.
Download or read book Design of Prestressed Concrete to Eurocode 2 written by Raymond Ian Gilbert and published by CRC Press. This book was released on 2017-01-27 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of structures in general, and prestressed concrete structures in particular, requires considerably more information than is contained in building codes. A sound understanding of structural behaviour at all stages of loading is essential. This textbook presents a detailed description and explanation of the behaviour of prestressed concrete members and structures both at service loads and at ultimate loads and, in doing so, provide a comprehensive and up-to-date guide to structural design. Much of the text is based on first principles and relies only on the principles of mechanics and the properties of concrete and steel, with numerous worked examples. However, where the design requirements are code specific, this book refers to the provisions of Eurocode 2: Design of Concrete Structures and, where possible, the notation is the same as in Eurocode 2. A parallel volume is written to the Australian Standard for Concrete Structures AS3600-2009. The text runs from an introduction to the fundamentals to in-depth treatments of more advanced topics in modern prestressed concrete structures. It suits senior undergraduate and graduate students and also practising engineers who want comprehensive introduction to the design of prestressed concrete structures. It retains the clear and concise explanations and the easy-to-read style of the first edition, but the content has been extensively re-organised and considerably expanded and updated. New chapters cover design procedures, actions and loads; prestressing systems and construction requirements; connections and detailing; and design concepts for prestressed concrete bridges. The topic of serviceability is developed extensively throughout. All the authors have been researching and teaching the behaviour and design of prestressed concrete structures for over thirty-five years and the proposed new edition of the book reflects this wealth of experience. The work has also gained much from Professor Gilbert active and long-time involvement in the development of standards for concrete buildings and concrete bridges.
Download or read book Reinforced Concrete Design to Eurocodes written by Prab Bhatt and published by CRC Press. This book was released on 2014-02-28 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth edition of a bestselling textbook has been extensively rewritten and expanded in line with the current Eurocodes. It presents the principles of the design of concrete elements and of complete structures, with practical illustrations of the theory. It explains the background to the Eurocode rules and goes beyond the core topics to cover the design of foundations, retaining walls, and water retaining structures. The text includes more than sixty worked out design examples and more than six hundred diagrams, plans, and charts. It suitable for civil engineering courses and is a useful reference for practicing engineers.
Download or read book Prestressed Concrete Design written by M.K. Hurst and published by CRC Press. This book was released on 2017-12-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prestressed concrete is widely used in the construction industry in buildings, bridges, and other structures. The new edition of this book provides up-to-date guidance on the detailed design of prestressed concrete structures according to the provisions of the latest preliminary version of Eurocode 2: Design of Concrete Structures, DD ENV 1992-1-1: 1992. The emphasis throughout is on design - the problem of providing a structure to fulfil a given purpose - but fundamental concepts are also described in detail. All major topics are dealt with, including prestressed flat slabs, an important and growing application in the design of buildings. The text is illustrated throughout with worked examples and problems for further study. Examples are given of computer spreadsheets for typical design calculations. Prestressed Concrete Design will be a valuable guide to practising engineers, students and research workers.
Download or read book Seismic Design of Concrete Buildings to Eurocode 8 written by Michael Fardis and published by CRC Press. This book was released on 2015-02-04 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Original Source of Expressions and Tools for the Design of Concrete Elements with EurocodeSeismic design of concrete buildings needs to be performed to a strong and recognized standard. Eurocode 8 was introduced recently in the 30 countries belonging to CEN, as part of the suite of Structural Eurocodes, and it represents the first European Stand
Download or read book How to Design Concrete Structures Using Eurocode 2 written by AJ.. Bond and published by . This book was released on 2006 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reinforced Concrete Design to EuroCode 2 EC2 written by William Henry Mosley and published by Macmillan Pub Limited. This book was released on 1996 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is developed from the established and well-known textbook Reinforced Concrete Design. It adopts the same format of presentation to cover the design and detailing of reinforced and prestressed concrete members and structures to the new Eurocode for the design of concrete structures (Eurocode 2: Design of Concrete Structures, Part 1).
