Download or read book Nondestructive Characterization of Materials IV written by J.F. Bussière and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a great deal of interest in extending nondestructive technologies beyond the location and identification of cracks and voids. Specifically there is growing interest in the application of nondestructive evaluation (NOEl to the measurement of physical and mechanical properties of materials. The measurement of materials properties is often referred to as materials characterization; thus nondestructive techniques applied to characterization become nondestructive characterization (NDCl. There are a number of meetings, proceedings and journals focused upon nondestructive technologies and the detection and identification of cracks and voids. However, the series of symposia, of which these proceedings represent the fourth, are the only meetings uniquely focused upon nondestructive characterization. Moreover, these symposia are especially concerned with stimulating communication between the materials, mechanical and manufacturing engineer and the NDE technology oriented engineer and scientist. These symposia recognize that it is the welding of these areas of expertise that is necessary for practical development and application of NDC technology to measurements of components for in service life time and sensor technology for intelligent processing of materials. These proceedings are from the fourth international symposia and are edited by c.o. Ruud, J. F. Bussiere and R.E. Green, Jr. . The dates, places, etc of the symposia held to date area as follows: Symposia on Nondestructive Methods for TITLE: Material Property Determination DATES: April 6-8, 1983 PLACE: Hershey, PA, USA CHAIRPERSONS: C.O. Ruud and R.E. Green, Jr.

Download or read book Basics of Optics of Multilayer Systems written by Sh. A. Furman and published by Atlantica Séguier Frontières. This book was released on 1992 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ZnO Thin Films written by Paolo Mele and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zinc oxide (ZnO) is an n-type semiconductor with versatile applications such as optical devices in ultraviolet region, piezoelectric transducers, transparent electrode for solar cells and gas sensors. This book "ZnO Thin Films: Properties, Performance and Applications" gives a deep insight in the intriguing science of zinc oxide thin films. It is devoted to cover the most recent advances and reviews the state of the art of ZnO thin films applications involving energy harvesting, microelectronics, magnetic devices, photocatalysis, photovoltaics, optics, thermoelectricity, piezoelectricity, electrochemistry, temperature sensing. It serves as a fundamental information source on the techniques and methodologies involved in zinc oxide thin films growth, characterization, post-deposition plasma treatments and device processing. This book will be invaluable to the experts to consolidate their knowledge and provide insight and inspiration to beginners wishing to learn about zinc oxide thin films.

Download or read book Nanomaterials and Nanochemistry written by C. Bréchignac and published by Springer Science & Business Media. This book was released on 2008-01-01 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a brilliant book that covers the major aspects of nanomaterials production. It integrates the many and varied chemical, material and thermo-dynamical facets of production, offering readers a new and unique approach to the subject. The mechanical, optical, and magnetic characteristics of nanomaterials are also presented in detail. Nanomaterials are a fast developing field of research and this book serves as both a reference work for researchers and a textbook for graduate students.

Download or read book Electronic and Photoelectron Spectroscopy written by Andrew M. Ellis and published by Cambridge University Press. This book was released on 2005-01-13 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic and photoelectron spectroscopy can provide extraordinarily detailed information on the properties of molecules and are in widespread use in the physical and chemical sciences. Applications extend beyond spectroscopy into important areas such as chemical dynamics, kinetics and atmospheric chemistry. This book aims to provide the reader with a firm grounding of the basic principles and experimental techniques employed. The extensive use of case studies effectively illustrates how spectra are assigned and how information can be extracted, communicating the matter in a compelling and instructive manner. Topics covered include laser-induced fluorescence, resonance-enhanced multiphoton ionization, cavity ringdown and ZEKE spectroscopy. The volume is for advanced undergraduate and graduate students taking courses in spectroscopy and will also be useful to anyone encountering electronic and/or photoelectron spectroscopy during their research.

Download or read book Computational Fluid Dynamics and Reacting Gas Flows written by Bjorn Engquist and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IMA Volume in Mathematics and its Applications COMPUTATIONAL FLUID DYNAMICS AND REACTING GAS FLOWS is in part the proceedings of a workshop which was an integral part of the 1986-87 IMA program on SCIENTIFIC COMPUTATION. We are grateful to the Scientific Committee: Bjorn Engquist (Chairman), Roland Glowinski, Mitchell Luskin and Andrew Majda for planning and implementing an exciting and stimulating year-long program. We especially thank the Workshop Organizers, Bjorn Engquist, Mitchell Luskin and Andrew Majda, for organizing a workshop which brought together many of the leading researchers in the area of computational fluid dynamics. George R. Sell Hans Weinberger PREFACE Computational fluid dynamics has always been of central importance in scientific computing. It is also a field which clearly displays the essential theme of interaction between mathematics, physics, and computer science. Therefore, it was natural for the first workshop of the 1986- 87 program on scientific computing at the Institute for Mathematics and Its Applications to concentrate on computational fluid dynamics. In the workshop, more traditional fields were mixed with fields of emerging importance such as reacting gas flows and non-Newtonian flows. The workshop was marked by a high level of interaction and discussion among researchers representing varied "schools of thought" and countries.

Download or read book Nutritional and Toxicological Consequences of Food Processing written by Mendel Friedman and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variety of processing methods are used to make foods edible; to pennit storage; to alter texture and flavor; to sterilize and pasteurize food; and to destroy microorganisms and other toxins. These methods include baking, broiling, cooking, freezing, frying, and roasting. Many such efforts have both beneficial and harmful effects. It is a paradox of nature that the processing of foods can improve nutrition, quality, safety, and taste, and yet occasionally lead to the formation of anti-nutritional and toxic compounds. These multifaceted consequences of food processing arise from molecular interactions among nutrients with each other and with other food ingredients. Since beneficial and adverse effects of food processing are of increasing importance to food science, nutrition, and human health, and since many of the compounds formed have been shown to be potent carcinogens and growth inhibitors in animals, I organized a symposium broadly concerned with the nutritional and toxicological consequences of food processing. The symposium was sponsored by the American Institute of Nutrition (AIN) -Federation of American Societies for Experimental Biology (FASEB) for its annual meeting in Washington, D.C., April 1-5, 1990. Invited speakers were asked to develop at least one of the following topics: 1. Nutrient-nonnutrient interactions between amino acids, proteins, carbohydrates, lipids, minerals, vitamins, tannins, fiber, natural toxicants, etc. 2. Effects of radiation. 3. Thermally induced formation of dietary mutagens, antimutagens, carcinogens, anticarcinogens, antioxidants, and growth inhibitors. 4. Effects of pH on nutritional value and safety.

Download or read book Critical Technologies Plan written by and published by . This book was released on 1989 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radioactive Aerosols written by Constantin Papastefanou and published by Elsevier. This book was released on 2011-07-28 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whenever radioactivity is released to the atmosphere, for example by the detonation of nuclear weapons or the testing of nuclear weapons or from nuclear reactor accidents that fraction of it which remains airborne for more than a few hours is liable to be attached to aerosol particles. The resulting radioactive aerosols are carried by atmospheric mixing processes until they settle out or are scavenged by precipitation. The radiation exposure pathway of maximum concern to humans is by inhalation of aerosols and their deposition in the respiratory tract. In this context, it is important to note that radioactive aerosols are commonly of natural origin alos. In particular, the associated radionuclides can be of natural terrestrial origin, such as the decay products of radon gas, or they can e cosmogenic, such as beryllium-7. The exposure of miners of uranium and other ores and minerals to radon and its aerosol-borne decay products is of major significance. The book describes the formation of aerosols, their aerodynamic size distribution, their atmospheric residence time, their sampling and measurement, the range of radioactive aerosols found and studied thus far, including man-made nuclides and radon decay products and their interaction with man, including deposition in the lung and subsequent health effects. - Advanced level science handbook for researchers, scientists and academics - Covers all aspects of radiation exposure in humans, including subsequent health implications - Presents the latest findings and analysis in this highly topical area

Download or read book Industrial Chemistry of Oxides for Emerging Applications written by Lech Pawlowski and published by John Wiley & Sons. This book was released on 2018-04-30 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valuable insights into the extraction, production, and properties of a large number of natural and synthetic oxides utilized in applications worldwide from ceramics, electronic components, and coatings This handbook describes each of the major oxides chronologically—starting from the processes of extraction of ores containing oxides, their purification and transformations into pure alloyed powders, and their appropriate characterization up to the processes of formation of 2D films by such methods as PVD, CVD, and coatings by thermal spraying or complicated 3D objects by sintering and rapid prototyping. The selection of oxides has been guided by the current context of industrial applications. An important point that is considered in the book concerns the strategic aspects of oxides. Some oxides (e.g. rare earth ones) become more expensive due to the growing demand for them, others, because of the strategic importance of countries producing raw materials and the countries that are using them. Industrial Chemistry of Oxides for Emerging Applications provides readers with everything they need to know in 7 chapters that cover: technical and economical importance of oxides in present and future; fundamentals of oxides manufacturing; extraction, properties, and applications of Al2O3; extraction, properties, and applications of ZrO2; synthesis, properties, and applications of YBaCu2O7x; extraction, properties, and applications of TiO2; and synthesis, properties, and application of hydroxyapatite. Presents the extraction, production, and properties of a large fraction of oxides applications worldwide, both natural as well as synthetic multi‐oxides Covers a very important segment of many industrial processes, such as refractories and piezoelectric oxides—both applications constituting very large market segments Developed from a lecture course given by the authors for over a decade Industrial Chemistry of Oxides for Emerging Applications is an excellent text for university professors and teachers, and graduate and postgraduate students with a solid background in physics and chemistry.

Download or read book Applications of Random Matrices in Physics written by Édouard Brezin and published by Springer Science & Business Media. This book was released on 2006-07-03 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Random matrices are widely and successfully used in physics for almost 60-70 years, beginning with the works of Dyson and Wigner. Although it is an old subject, it is constantly developing into new areas of physics and mathematics. It constitutes now a part of the general culture of a theoretical physicist. Mathematical methods inspired by random matrix theory become more powerful, sophisticated and enjoy rapidly growing applications in physics. Recent examples include the calculation of universal correlations in the mesoscopic system, new applications in disordered and quantum chaotic systems, in combinatorial and growth models, as well as the recent breakthrough, due to the matrix models, in two dimensional gravity and string theory and the non-abelian gauge theories. The book consists of the lectures of the leading specialists and covers rather systematically many of these topics. It can be useful to the specialists in various subjects using random matrices, from PhD students to confirmed scientists.

Download or read book Energetics of Stable Molecules and Reactive Intermediates written by M.E. Minas da Piedade and published by Springer. This book was released on 1999-05-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the major experimental and theoretical methods currently used to study the energetics of stable molecules and reactive intermediates. Reviews the ate of the art and shows the interplay of experimental and theoretical methods used to probe bonding energetics and reactivity and a wide range of chemical species. A modern and invaluable introduction to the study of molecular energetics. A reference for workers currently involved in the field.

Download or read book Finite Elements in Plasticity written by D. R. J. Owen and published by . This book was released on 1980 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radiation Effects in Materials written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of radiation effects has developed as a major field of materials science from the beginning, approximately 70 years ago. Its rapid development has been driven by two strong influences. The properties of the crystal defects and the materials containing them may then be studied. The types of radiation that can alter structural materials consist of neutrons, ions, electrons, gamma rays or other electromagnetic waves with different wavelengths. All of these forms of radiation have the capability to displace atoms/molecules from their lattice sites, which is the fundamental process that drives the changes in all materials. The effect of irradiation on materials is fixed in the initial event in which an energetic projectile strikes a target. The book is distributed in four sections: Ionic Materials; Biomaterials; Polymeric Materials and Metallic Materials.

Download or read book Applications of Computer Algebra written by Richard Pavelle and published by Springer. This book was released on 1985 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, certain computer software systems exist which surpass the computational ability of researchers when their mathematical techniques are applied to many areas of science and engineering. These computer systems can perform a large portion of the calculations seen in mathematical analysis. Despite this massive power, thousands of people use these systems as a routine resource for everyday calculations. These software programs are commonly called "Computer Algebra" systems. They have names such as MACSYMA, MAPLE, muMATH, REDUCE and SMP. They are receiving credit as a computational aid with in creasing regularity in articles in the scientific and engineering literature. When most people think about computers and scientific research these days, they imagine a machine grinding away, processing numbers arithmetically. It is not generally realized that, for a number of years, computers have been performing non-numeric computations. This means, for example, that one inputs an equa tion and obtains a closed form analytic answer. It is these Computer Algebra systems, their capabilities, and applications which are the subject of the papers in this volume.

Download or read book Radiation Protection Activities written by United States. Environmental Protection Agency. Office of Radiation Programs and published by . This book was released on 1976 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonlinear Integral Equations written by Philip M. Anselone and published by . This book was released on 1964 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: