Download or read book Ethylene Propylene Rubber Production Cost Analysis EPDM E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylene Propylene (EPDM) Rubber production from polymer grade (PG) propylene and ethylene. The process examined is a typical suspension polymerization process. This report was developed based essentially on the following reference(s): (1) US Patent 2016/0312021, issued to Arlanxeo in 2016 (2) US Patent 5729911 issued to Bayer in 1998 Keywords: Ethylene Propylene Diene Monomer (M-Class) Rubber, EPDM Rubber, Montecatini Edison

Download or read book Ethylene Propylene Rubber Production Cost Analysis EPDM E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylene Propylene (EPDM) Rubber production from polymer grade (PG) propylene and ethylene The process examined is a typical suspension polymerization process. This report was developed based essentially on the following reference(s): (1) US Patent 2016/0312021, issued to Arlanxeo in 2016 (2) US Patent 5729911 issued to Bayer in 1998 Keywords: Ethylene Propylene Diene Monomer (M-Class) Rubber, EPDM Rubber, Montecatini Edison

Download or read book Polychloroprene Production Cost Analysis CR E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Chloroprene Rubber (also known as Polychloroprene) production from chloroprene. The process examined is a typical emulsion process. This report was developed based essentially on the following reference(s): Keywords: Neoprene, Chloroprene Rubber, 2-Chlorobuta-1,3-Diene, Synthetic Rubbers

Download or read book Propylene Production via Metathesis Cost Analysis Propylene E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polymer Grade (PG) Propylene production from ethylene and raffinate-2 using a metathesis process. The process examined is similar to CB&I Lummus Technology's Olefins Conversion Technology (OCT). In this process, Polymer Grade Propylene is produced through a metathesis reaction of ethylene with 2-butene, present in raffinate-2 feedstock. This report examines one-time costs associated with the construction of a plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in process unit (ISBL); infrastructure (OSBL), contingency and owner's cost - Total fixed capital required, divided in process unit (ISBL); infrastructure (OSBL), contingency and owner's cost - Working capital and costs incurred during industrial plant commissioning and start-up * Operating cost, broken down by: - Variable operating costs (raw materials, utilities) - Fixed operating costs (maintenance, operating charges, plant overhead, local taxes and insurance) - Depreciation This report was developed based essentially on the following reference(s): (1) US Patent 8440874, issued to Lummus Technology and BASF in 2013 (2) US Patent 20050124839, issued to Lummus Technology in 2005 Keywords: PG Propylene, Olefins Disproportionation, Lummus OCT, Olefins Metathesis, Phillips Triolefin, Propene, Ethene, Butylene, On-Purpose Propylene Production

Download or read book Ethylene Production via Steam Cracking of Ethane Cost Analysis Ethylene E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from ethane feedstock using a typical steam cracking process. In this process, ethane is thermally cracked in pyrolysis furnaces through the use of steam. In addition to polymer grade Ethylene, the process also generates a methane-rich gas (used as fuel in the cracking furnaces) and hydrogen-rich gas, sold as by-product. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W

Download or read book Ethylene Oxide Production from Ethylene Cost Analysis EO E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylene Oxide production from ethylene. The process examined is a typical direct oxidation process. In the process examined, pure oxygen is used as the oxidizing agent. This report was developed based essentially on the following reference(s): "Ethylene Oxide", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Dow Meteor, Shell Master, Scientific Design

Download or read book Propylene Production Cost Analysis Overview Propylene AA01 written by Intratec Solutions and published by . This book was released on 2016-03 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing PG Propylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of PG Propylene production through the following pathways:* Pathway 1: Propylene Production from Light Naphtha* Pathway 2: Propylene Production from Ethylene and Butenes* Pathway 3: Propylene Production from Propane (with Hydrogen Generation)Pathway 1 corresponds to a steam cracker for Propylene production (ethylene as co-product). In Pathway 2, Propylene is produced via metathesis reaction of ethylene with 2-butene (present in raffinate-2 feedstock). In Pathway 3, propane is dehydrogenated to Propylene with hydrogen generated being valued as fuel. The analysis presented in this report includes:* A comparison of the economic potential of the pathways listed above in several countries, comprising: * Comparative analysis of capital costs * Comparative analysis of production costs * Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: * Raw material(s) consumption figures and product(s) generated * Related technology licensors and block flow diagram of representative industrial processes Keywords: Propene, Ethene, Steam Cracking, PDH, Propane Dehydrogenation, Olefins Conversion Technology, OCT

Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more

Download or read book Rubber Nanocomposites written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2010-04-09 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber Nanocomposites: Preparation, Properties and Applications focuses on the preparation, characterization and properties of natural and synthetic rubber nanocomposites. The book carefully debates the preparation of unmodified and modified nanofillers, various manufacturing techniques of rubber nanocomposites, structure, morphology and properties of nanocomposites. The text reviews the processing; characterization and properties of 0-, 1D and 2D nanofiller reinforced rubber nanocomposites. It examines the polymer/filler interaction, i.e., the compatibility between matrix and filler using unmodified and modified nanofillers. The book also examines the applications of rubber nanocomposites in various engineering fields, which include tyre engineering. The book also examines the current state of the art, challenges and applications in the field of rubber nanocomposites. The handpicked selection of topics and expert contributions make this survey of rubber nanocomposites an outstanding resource for anyone involved in the field of polymer materials design. A handy "one stop" reference resource for important research accomplishments in the area of rubber nanocomposites. Covers the various aspects of preparation, characterization, morphology, properties and applications of rubber nanocomposites. Summarizes many of the recent technical research accomplishments in the area of nanocomposites, in a comprehensive manner It covers an up to date record on the major findings and observations in the field

Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.

Download or read book Leachate from Municipal Landfills written by James C. S. Lu and published by . This book was released on 1985 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Long Term Durability of Polymeric Matrix Composites written by Kishore V. Pochiraju and published by Springer Science & Business Media. This book was released on 2011-09-25 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Long-Term Durability of Polymeric Matrix Composites presents a comprehensive knowledge-set of matrix, fiber and interphase behavior under long-term aging conditions, theoretical modeling and experimental methods. This book covers long-term constituent behavior, predictive methodologies, experimental validation and design practice. Readers will also find a discussion of various applications, including aging air craft structures, aging civil infrastructure, in addition to engines and high temperature applications.

Download or read book Toughened Plastics written by C. Bucknall and published by Springer. This book was released on 2013-12-19 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dielectric Polymer Nanocomposites written by J. Keith Nelson and published by Springer Science & Business Media. This book was released on 2009-12-17 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectric Polymer Nanocomposites provides the first in-depth discussion of nano-dielectrics, an emerging and fast moving topic in electrical insulation. The text begins with an overview of the background, principles and promise of nanodielectrics, followed by a discussion of the processing of nanocomposites and then proceeds with special considerations of clay based processes, mechanical, thermal and electric properties and surface properties as well as erosion resistance. Carbon nanotubes are discussed as a means of creation of non linear conductivity, the text concludes with a industrial applications perspective.

Download or read book Electric Cables Handbook written by BICC Cables Ltd and published by Wiley-Blackwell. This book was released on 1997-12-08 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Cables Handbook provides a comprehensive and substantial coverage of all types of energy cables--from wiring and flexible cables for general use, to distribution, transmission and submarine cables. It includes information on materials, design principles, installation, operating experience and standards, and several appendices contain extensive data tables on commonly used cable types and their properties. Electric Cables Handbook is an extensive source of up-to-date and essential information for electrical engineers, contractors, supply authorities and cable manufacturers.

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1991 with total page 1390 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pavement Design and Materials written by A. T. Papagiannakis and published by John Wiley & Sons. This book was released on 2017-02-22 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, state-of-the-art guide to pavement design and materials With innovations ranging from the advent of SuperpaveTM, the data generated by the Long Term Pavement Performance (LTPP) project, to the recent release of the Mechanistic-Empirical pavement design guide developed under NCHRP Study 1-37A, the field of pavement engineering is experiencing significant development. Pavement Design and Materials is a practical reference for both students and practicing engineers that explores all the aspects of pavement engineering, including materials, analysis, design, evaluation, and economic analysis. Historically, numerous techniques have been applied by a multitude of jurisdictions dealing with roadway pavements. This book focuses on the best-established, currently applicable techniques available. Pavement Design and Materials offers complete coverage of: The characterization of traffic input The characterization of pavement bases/subgrades and aggregates Asphalt binder and asphalt concrete characterization Portland cement and concrete characterization Analysis of flexible and rigid pavements Pavement evaluation Environmental effects on pavements The design of flexible and rigid pavements Pavement rehabilitation Economic analysis of alternative pavement designs The coverage is accompanied by suggestions for software for implementing various analytical techniques described in these chapters. These tools are easily accessible through the book’s companion Web site, which is constantly updated to ensure that the reader finds the most up-to-date software available.