Download or read book Estimating the Performance and Economic Value of Multiple Concentrating Solar Power Technologies in a Production Cost Model written by and published by . This book was released on 2013 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concentrating solar power with thermal energy storage (CSP-TES) is a unique source of renewable energy in that the solar thermal energy can be dispatched similarly to conventional thermal generation. However, CSP-TES plants are energy-limited, meaning that their response might be restricted by solar availability. Therefore, the use of this limited solar energy must be optimally scheduled toprovide the greatest value to the system. The timing of CSP-TES dispatch depends on a variety of factors, including electricity demand patterns, the penetration of variable generation sources, and the configuration of the CSP-TES plant itself. We use an established CSP-TES modeling framework in a commercially available production cost model to compare the dispatch and value of two CSP-TEStechnologies (molten salt towers and parabolic troughs) in a Colorado test system. In addition, we consider a range of configuration parameters, such as the solar multiple and thermal energy storage limit, to evaluate how the operational and capacity value varies with plant configuration.
Download or read book Estimating the Performance and Economic Value of Multiple Concentrating Solar Power Technologies in a Production Cost Model written by Jennie Jorgenson and published by . This book was released on 2013 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concentrating solar power with thermal energy storage (CSP-TES) is a unique source of renewable energy in that the solar thermal energy can be dispatched similarly to conventional thermal generation. However, CSP-TES plants are energy-limited, meaning that their response might be restricted by solar availability. Therefore, the use of this limited solar energy must be optimally scheduled to provide the greatest value to the system. The timing of CSP-TES dispatch depends on a variety of factors, including electricity demand patterns, the penetration of variable generation sources, and the configuration of the CSP-TES plant itself. We use an established CSP-TES modeling framework in a commercially available production cost model to compare the dispatch and value of two CSP-TES technologies (molten salt towers and parabolic troughs) in a Colorado test system. In addition, we consider a range of configuration parameters, such as the solar multiple and thermal energy storage limit, to evaluate how the operational and capacity value varies with plant configuration.
Download or read book The Economics and Policy of Concentrating Solar Power Generation written by Pere Mir-Artigues and published by Springer. This book was released on 2019-05-31 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an up-to-date analysis of state-of-the-art concentrating solar power (CSP) generation. It focuses on the economic analysis of CSP generation technologies as well as the policies that have been and are being used around the globe to support it. The book describes the industrial sectors whose products make up the solar field, including the traditional manufacturers of turbines and generators.The authors provide the main theoretical tools needed to comprehend the costs of CSP technologies compared to other competing technologies (both conventional and renewable) and discuss the conceptual rationale behind creating public support for these technologies and the costs of various promotional techniques. Further, the book examines the concepts from different disciplinary traditions in economics (including environmental, innovation, industrial and public), which are then combined and integrated for an analysis of the costs and policies of CSP electricity.Addressing the main findings and the challenges for future CSP, the book is a valuable resource for researchers and practitioners. It is also of use to industrial engineers, as it identifies the features of the sector’s supply chain value, rooted in and supported by an industrial economics approach.
Download or read book Predictive Performance Simulation of Concentrated Solar Power Technologies in Three Selected Cities in Northern Nigeria written by Haruna Mohammed Muye and published by Anchor Academic Publishing. This book was released on 2015-11-24 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work a predictive performance simulation of Solar Tower and Parabolic Trough Concentrating Solar Power plants was undertaken for three sites in Northern Nigeria. The simulation was done using Solar Advisor Model (SAM). The three sites - Minna, Kano, and Sokoto - were selected based on their Direct Normal Irradiation (DNI) values and hours of sunshine per day which are comparable to that of the sites where Concentrated Solar Power (CSP) plants are operating in Southern Spain. The simulation process adopted for this study includes: configuration of receiver and collector components, selection of Heat Transfer Fluid (HTF) and specification of the operating temperatures, sizing and configuration of solar field, specification of power cycle design point, specification of the thermal storage parameters, and optimization of hour of thermal energy storage, solar multiple and cooling system. The results show that the Solar Tower plant is more favoured to be adopted for use in the study sites because it has higher annual electrical energy generation, a higher capacity factor and lower Levelised costs of electricity. The Net Present Value of the CSP plants at all the sites is positive implying that the project is economically viable. The study also showed that at solar multiple of 2, the levelised cost of electricity for both Solar Towers and Parabolic Troughs is the lowest, irrespective of the cooling system (wet or dry cooling). Solar multiple has no effect on the water usage irrespective of the CSP plant. Dry cooling system reduces the water usage by 86% and 95% for Solar Tower and Parabolic Trough plants, respectively. The annual electrical energy generations of the CSP plants increase with increasing solar multiple. Dry cooling systems reduce the annual electrical energy generation in the range of 7.3 to 7.5 percent for the Solar Tower plant and 8 to 9 percent for the Parabolic Trough plant.
Download or read book Handbook Of Solar Thermal Technologies Concentrating Solar Power And Fuels In 3 Volumes written by and published by World Scientific. This book was released on 2022-08-11 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume handbook showcases the state of the art in the use of concentrated sunlight to produce electricity, industrial process heat, renewable fuels, including hydrogen and low-carbon synthesis gas, and valuable chemical commodities. The handbook illustrates the value and diversity of applications for concentrating solar power to contribute to the expanding decarbonization of multiple cross-cutting energy sectors.Volume 1: Concentrating Solar Thermal Power, provides an overview of key technologies, principles, and challenges of concentrating solar power (CSP) as well as the use of concentrating solar thermal for process heating and district markets. The ten chapters of this volume provide the reader with the technical background on the solar resource for concentrating solar thermal, the principles and design of concentrating optics, and descriptions of state-of-the-art and emerging solar collector and receiver technologies, thermal storage and thermal-to-electric conversion and power cycles for CSP. It also contains a comprehensive summary of operations and maintenance requirements for CSP plants, and commercial CSP plants and markets around the world.Volume 2, Solar Thermochemical Processes and Products, covers the use of concentrated solar radiation as the heat source to drive endothermic chemical reactions to produce renewable fuels and valuable chemical commodities, equivalently storing solar energy in chemical bonds. The thermodynamic underpinnings of a number of approaches to produce fuel and results of demonstrations of solar thermochemical reactors for these processes at prototype scale are presented. Processes presented include thermochemical metal oxide reduction/oxidation cycles to split water and carbon dioxide solar chemical looping reformation of methane to produce synthesis gas, high temperature electrochemistry, and gasification of biomass. Research on the thermochemical storage for CSP and high temperature production of cement and ammonia to illustrate the use concentrated solar energy to produce valuable chemical products are also included.Volume 3 contains reprinted archival papers to support and supplement the material in Volumes 1 and 2. These papers provide background information on the economics and alternative use cases of CSP not covered in Volume 1, and expand on the material related to the chapter topics presented in Volume 2. Potential commercialization, such as prototype and demonstration projects, are highlighted. The papers are intended as a starting point for a more in-depth study of the topics.
Download or read book Renewable Energy Integration written by Lawrence E. Jones and published by Academic Press. This book was released on 2014-06-12 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Energy Integration is a ground-breaking new resource - the first to offer a distilled examination of the intricacies of integrating renewables into the power grid and electricity markets. It offers informed perspectives from internationally renowned experts on the challenges to be met and solutions based on demonstrated best practices developed by operators around the world. The book's focus on practical implementation of strategies provides real-world context for theoretical underpinnings and the development of supporting policy frameworks. The book considers a myriad of wind, solar, wave and tidal integration issues, thus ensuring that grid operators with low or high penetration of renewable generation can leverage the victories achieved by their peers. Renewable Energy Integration highlights, carefully explains, and illustrates the benefits of advanced technologies and systems for coping with variability, uncertainty, and flexibility. - Lays out the key issues around the integration of renewables into power grids and markets, from the intricacies of operational and planning considerations, to supporting regulatory and policy frameworks - Provides global case studies that highlight the challenges of renewables integration and present field-tested solutions - Illustrates enabling and disruptive technologies to support the management of variability, uncertainty and flexibility
Download or read book Evolution and Trends of Sustainable Approaches written by Daniel Alejandro Rossit and published by Elsevier. This book was released on 2024-06-12 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evolution and Trends of Sustainable Approaches: Latest Development and Innovations in Science and Technology Applications provides different trends and approaches within the sustainability framework to assess their impact and offer possible solutions to problems facing the global sustainability paradigm. This book evaluates sustainability assessment approaches which support different levels of both decision-making and policy processes, thereby improving the management of natural and human systems. This book explores sustainable firm solutions, the upward trend of sustainability, and its variants. At the same time, different existing approaches are analyzed. These sustainable assessment approaches can be applied to products, services and technologies as well as business models, such as the Product-Service-System (PSS), Circular Economy (CE), Industrial Symbiosis (IS), and Supply Chain (SC). Finally, the book explores Sustainability Indicators (SIs), which are widely used to measure and communicate progress towards sustainable development, along with Life Cycle Sustainability Assessment (LCSA), balancing the three dimensions of sustainability (environmental, social and economic). - Explores innovative strategies and advanced trends of sustainable approaches, engineering, and industrial applications - Analyzes sustainability assessments and their role in planning and project processes - Reviews state-of-the-art sustainable technologies - Evaluates approaches for organizations to achieve both sustainability assessment and sustainable solutions
Download or read book Advances in Steam Turbines for Modern Power Plants written by Tadashi Tanuma and published by Woodhead Publishing. This book was released on 2017-02-15 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Steam Turbines for Modern Power Plants provides an authoritative review of steam turbine design optimization, analysis and measurement, the development of steam turbine blades, and other critical components, including turbine retrofitting and steam turbines for renewable power plants. As a very large proportion of the world's electricity is currently generated in systems driven by steam turbines, (and will most likely remain the case in the future) with steam turbines operating in fossil-fuel, cogeneration, combined cycle, integrated gasification combined cycle, geothermal, solar thermal, and nuclear plants across the world, this book provides a comprehensive assessment of the research and work that has been completed over the past decades. - Presents an in-depth review on steam turbine design optimization, analysis, and measurement - Written by a range of experts in the area - Provides an overview of turbine retrofitting and advanced applications in power generation
Download or read book Assessment of Parabolic Trough and Power Tower Solar Technology Cost and Performance Forecasts written by and published by DIANE Publishing. This book was released on 2003 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sargent and Lundy LLC conducted an independent analysis of parabolic trough and power tower solar technology cost and performance.
Download or read book Estimating the Value of Utility Scale Solar Technologies in California Under a 40 Renewable Portfolio Standard written by and published by . This book was released on 2014 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concentrating solar power with thermal energy storage (CSP-TES) is a unique source of solar energy in that its output can be shifted over time. The ability of CSP-TES to be a flexible source of generation may be particularly valuable in regions with high overall penetration of solar energy, such as the state of California. California's Renewable Portfolio Standard (RPS) requires the state to increase generation from eligible renewable energy resources to reach 33% of retail electricity sales by 2020. Beyond 2020, California targets a further reduction in greenhouse gas emissions. To help reach this goal, current California governor Jerry Brown has stated that a higher 40% RPS might be reachable in the near term. The levelized cost of energy is generally emphasized when assessing the economic viability of renewable energy systems implemented to achieve the RPS. However, the operational and capacity benefits of such systems are often ignored, which can lead to incorrect economic comparisons between CSP-TES and variable renewable generation technologies such as solar photovoltaics (PV). Here we evaluate a 40% RPS scenario in a California grid model with PV or CSP-TES providing the last 1% of RPS energy. We compare the technical and economic implications of integrating either solar technology under several sensitivities, finding that the ability to displace new conventional thermal generation capacity may be the largest source of value of CSP-TES compared to PV at high solar penetrations.
Download or read book Estimating the value of utility scale solar technologies in California under a 40 renewable portfolio standard written by Paul Denholm and published by . This book was released on 2014 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concentrating Solar Power Technology written by Keith Lovegrove and published by Elsevier. This book was released on 2012-10-19 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concentrating solar power (CSP) technology is poised to take its place as one of the major contributors to the future clean energy mix. Using straightforward manufacturing processes, CSP technology capitalises on conventional power generation cycles, whilst cost effectively matching supply and demand though the integration of thermal energy storage. Concentrating solar power technology provides a comprehensive review of this exciting technology, from the fundamental science to systems design, development and applications.Part one introduces fundamental principles of concentrating solar power systems. Site selection and feasibility analysis are discussed, alongside socio-economic and environmental assessments. Part two focuses on technologies including linear Fresnel reflector technology, parabolic-trough, central tower and parabolic dish concentrating solar power systems, and concentrating photovoltaic systems. Thermal energy storage, hybridization with fossil fuel power plants and the long-term market potential of CSP technology are explored. Part three goes on to discuss optimisation, improvements and applications. Topics discussed include absorber materials for solar thermal receivers, design optimisation through integrated techno-economic modelling, heliostat size optimisation, heat flux and temperature measurement technologies, concentrating solar heating and cooling for industrial processes, and solar fuels and industrial solar chemistry.With its distinguished editors and international team of expert contributors, Concentrating solar power technology is an essential guide for all those involved or interested in the design, production, development, optimisation and application of CSP technology, including renewable energy engineers and consultants, environmental governmental departments, solar thermal equipment manufacturers, researchers and academics. - Provides a comprehensive review of concentrating solar power (CSP) technology, from the fundamental science to systems design, development and applications - Reviews fundamental principles of concentrating solar power systems, including site selection and feasibility analysis and socio-economic and environmental assessments - Provides an overview of technologies such as linear Fresnel reflector technology, parabolic-trough, central tower and parabolic dish concentrating solar power systems, and concentrating photovoltaic systems
Download or read book Methods for Analyzing the Economic Value of Concentrating Solar Power with Thermal Energy Storage written by and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concentrating solar power with thermal energy storage (CSP-TES) provides multiple quantifiable benefits. To the extent feed-in tariffs should reflect the value of energy, quantifying the value of CSP power is important to policymaking. These benefits can be divided into two major categories: avoided variable costs and avoided fixed costs. This report describes modeling approaches that have emerged to quantify these benefits, specifically in the context of state-level policymaking in the United States. It also discusses these modeling methods and potential applicability in the China context.
Download or read book Summary of Simulating the Value of Concentrating Solar Power with Thermal Energy Storage in a Production Cost Model Presentation written by and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concentrating solar power (CSP) deployed with thermal energy storage (TES) provides a dispatchable source of renewable energy. The value of CSP with TES, as with other potential generation resources, needs to be established using traditional utility planning tools. Production cost models, which simulate the operation of grid, are often used to estimate the operational value of differentgeneration mixes. CSP with TES has historically had limited analysis in commercial production simulations. This document describes the implementation of CSP with TES in a commercial production cost model. It also describes the simulation of grid operations with CSP in a test system consisting of two balancing areas located primarily in Colorado.
Download or read book Simulating the Value of Concentrating Solar Power with Thermal Energy Storage in a Production Cost Model written by and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concentrating solar power (CSP) deployed with thermal energy storage (TES) provides a dispatchable source of renewable energy. The value of CSP with TES, as with other potential generation resources, needs to be established using traditional utility planning tools. Production cost models, which simulate the operation of grid, are often used to estimate the operational value of differentgeneration mixes. CSP with TES has historically had limited analysis in commercial production simulations. This document describes the implementation of CSP with TES in a commercial production cost model. It also describes the simulation of grid operations with CSP in a test system consisting of two balancing areas located primarily in Colorado.
Download or read book Summary of written by and published by . This book was released on 2013 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concentrating solar power (CSP) deployed with thermal energy storage (TES) provides a dispatchable source of renewable energy. The value of CSP with TES, as with other potential generation resources, needs to be established using traditional utility planning tools. Production cost models, which simulate the operation of grid, are often used to estimate the operational value of different generation mixes. CSP with TES has historically had limited analysis in commercial production simulations. This document describes the implementation of CSP with TES in a commercial production cost model. It also describes the simulation of grid operations with CSP in a test system consisting of two balancing areas located primarily in Colorado.
Download or read book Modelling Concentrating Solar Power with Thermal Energy Storage for Integration Studies written by and published by . This book was released on 2013 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concentrating solar power with thermal energy storage (CSP-TES) can provide multiple benefits to the grid, including low marginal cost energy and the ability to levelize load, provide operating reserves, and provide firm capacity. It is challenging to properly value the integration of CSP because of the complicated nature of this technology. Unlike completely dispatchable fossil sources, CSP is a limited energy resource, depending on the hourly and daily supply of solar energy. To optimize the use of this limited energy, CSP-TES must be implemented in a production cost model with multiple decision variables for the operation of the CSP-TES plant. We develop and implement a CSP-TES plant in a production cost model that accurately characterizes the three main components of the plant: solar field, storage tank, and power block. We show the effect of various modelling simplifications on the value of CSP, including: scheduled versus optimized dispatch from the storage tank and energy-only operation versus co-optimization with ancillary services.
