Download or read book Essential Circuit Analysis using NI MultisimTM and MATLAB written by Farzin Asadi and published by Springer Nature. This book was released on 2022-02-28 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a compact but comprehensive treatment that guides students through the analysis of circuits, using NI MultisimTM and MATLAB®. Ideal as a hands-on source for courses in Circuits, Electronics, Digital Logic and Power Electronics this text focuses on solving problems using market-standard software, corresponding to all key concepts covered in the classroom. The author uses his extensive classroom experience to guide students toward deeper understanding of key concepts, while they gain facility with software they will need to master for later studies and practical use in their engineering careers.

Download or read book Circuit Analysis with Multisim written by David Baez-Lopez and published by Springer Nature. This book was released on 2022-05-31 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with circuit simulation using National Instruments Multisim. It focuses on the use and comprehension of the working techniques for electrical and electronic circuit simulation. The first chapters are devoted to basic circuit analysis. It starts by describing in detail how to perform a DC analysis using only resistors and independent and controlled sources. Then, it introduces capacitors and inductors to make a transient analysis. In the case of transient analysis, it is possible to have an initial condition either in the capacitor voltage or in the inductor current, or both. Fourier analysis is discussed in the context of transient analysis. Next, we make a treatment of AC analysis to simulate the frequency response of a circuit. Then, we introduce diodes, transistors, and circuits composed by them and perform DC, transient, and AC analyses. The book ends with simulation of digital circuits. A practical approach is followed through the chapters, using step-by-step examples to introduce new Multisim circuit elements, tools, analyses, and virtual instruments for measurement. The examples are clearly commented and illustrated. The different tools available on Multisim are used when appropriate so readers learn which analyses are available to them. This is part of the learning outcomes that should result after each set of end-of-chapter exercises is worked out. Table of Contents: Introduction to Circuit Simulation / Resistive Circuits / Time Domain Analysis -- Transient Analysis / Frequency Domain Analysis -- AC Analysis / Semiconductor Devices / Digital Circuits

Download or read book Circuit Analysis with Multisim written by David Báez-López and published by Morgan & Claypool Publishers. This book was released on 2011 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with circuit simulation using National Instruments Multisim. It focuses on the use and comprehension of the working techniques for electrical and electronic circuit simulation. The first chapters are devoted to basic circuit analysis. It starts by describing in detail how to perform a DC analysis using only resistors and independent and controlled sources. Then, it introduces capacitors and inductors to make a transient analysis. In the case of transient analysis, it is possible to have an initial condition either in the capacitor voltage or in the inductor current, or both. Fourier analysis is discussed in the context of transient analysis. Next, we make a treatment of AC analysis to simulate the frequency response of a circuit. Then, we introduce diodes, transistors, and circuits composed by them and perform DC, transient, and AC analyses. The book ends with simulation of digital circuits. A practical approach is followed through the chapters, using step-by-step examples to introduce new Multisim circuit elements, tools, analyses, and virtual instruments for measurement. The examples are clearly commented and illustrated. The different tools available on Multisim are used when appropriate so readers learn which analyses are available to them. This is part of the learning outcomes that should result after each set of end-of-chapter exercises is worked out. Table of Contents: Introduction to Circuit Simulation / Resistive Circuits / Time Domain Analysis -- Transient Analysis / Frequency Domain Analysis -- AC Analysis / Semiconductor Devices / Digital Circuits

Download or read book Circuit Analysis I written by Steven T. Karris and published by Orchard Publications. This book was released on 2009 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introduction to the basic principles of electrical engineering and covers DC and AC circuit analysis and Transients. It is intended for all engineering majors and presumes knowledge of first year differential and integral calculus and physics. The last two chapters include step-by-step procedures for the solutions of simple differential equations used in the derivation of the natural and forces responses. Appendices A, B, and C are introductions to MATLAB, Simulink, and SimPowerSystems respectively. Appendix D is a review of Complex Numbers, and Appendix E is an introduction to matrices and determinants.

Download or read book Circuit Analysis I written by Steven T. Karris and published by Orchard Publications. This book was released on 2003 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to the basic principles of electrical engineering teaches the fundamentals of electrical circuit analysis and introduces MATLAB - software used to write efficient, compact programs to solve mechanical engineering problems of varying complexity.

Download or read book Electric Circuit Analysis with EasyEDA written by Farzin Asadi and published by Springer Nature. This book was released on 2022-06-03 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains and focuses on analysis of electric circuits using an up-to-date software package. The book is filled with examples that students will see throughout a standard electric circuit course. This book is a good source to accompany and complete theoretical work of professors. The author provides a single-source for anyone who needs to analyse an electric circuit.

Download or read book Analog Electronic Circuits Laboratory Manual written by Farzin Asadi and published by Springer Nature. This book was released on 2023-04-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book for a lab course meant to accompany, or follow, any standard course in electronic circuit analysis. It has been written for sophomore or junior electrical and computer engineering students, either concurrently with their electronic circuit analysis class or following that class. This book is appropriate for non-majors, such as students in other branches of engineering and in physics, for which electronic circuits is a required course or elective and for whom a working knowledge of electronic circuits is desirable. This book has the following objectives: 1. To support, verify, and supplement the theory; to show the relations and differences between theory and practice. 2. To teach measurement techniques. 3. To convince students that what they are taught in their lecture classes is real and useful. 4. To help make students tinkerers and make them used to asking “what if” questions.

Download or read book Essentials of C Programming with Microsoft Visual Studio written by Farzin Asadi and published by Springer Nature. This book was released on with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a compact but comprehensive treatment that guides readers through the C programming language with Microsoft® Visual Studio®. The author uses his extensive classroom experience to guide readers toward deeper understanding of key concepts of the C language. Each concept and feature of the language is presented as a short lesson, illustrated by practical worked examples to aid student self study. The book will appeal to a broad range of students who are required to study the C programming language. Provides complete coverage of the standard C language and its standard libraries; Filled with sample code, selected with care to show the C language concepts clearly; Code is written in freeware Community version of Microsoft Visual Studio.

Download or read book Industrial Electronic Circuits Laboratory Manual written by Farzin Asadi and published by Springer Nature. This book was released on 2024-02-07 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Electronics is a branch of electronics, which is used for industrial applications. It plays a crucial role in the efficient and smooth operation of manufacturing facilities and industrial processes. This book introduces the commonly used building blocks in industrial electronics. The reader learns which circuit can be used for which application. It is suitable as a laboratory manual for courses like: industrial electronics or power electronics.

Download or read book Electric Circuits Laboratory Manual written by Farzin Asadi and published by Springer Nature. This book was released on 2023-03-27 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides insights into practical aspects of electric circuits. The author provides real-world examples throughout this book. The devices chosen for this book can be found in nearly all laboratories. No expensive measurement devices are used throughout the book. Someone who reads this book has a better understanding of practical aspects of electric circuits. Chapter 1 introduces tools that will be used in the next chapters. Chapter 2 studies the resistors and contains 9 experiments. Chapter 3 studies the digital multimeters and contains 7 experiments. Chapter 4 studies Kirchhoff's voltage/current law, nodal/mesh analysis and Thevenin equivalent circuits. This chapter contains 5 experiments. Chapter 5 studies the first and second order circuits (RC, RL and RLC) and contains 4 experiments. Chapter 6 studies the DC and AC steady state behavior of electric circuits and frequency response of filters and has 5 experiments. Chapter 7 studies magnetic coupling and transformers and contains 3 experiments. Appendix A shows how different types of graphs can be drawn with MATLAB. Appendix B reviews the concept of root mean square.

Download or read book Circuit Systems with MATLAB and PSpice written by Won Y. Yang and published by Won Y. Yang. This book was released on 2012-03-02 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Instead of the conventional method using the general/particular solutions to solve differential equations for the circuits containing inductors/capacitors, this book lays emphasis on the Laplace transform method for solving differential equations. We recommend taking the Laplace transform of electric circuits (containing inductors/capacitors) and setting up the transformed circuit equations directly in the unified framework (as if they were just made of resistors and sources) rather than setting up the circuit equations in the form of differential equations and then taking their Laplace transforms to solve them. The Laplace transform and the inverse Laplace transform are introduced in the Appendix. 2. This book presents several MATLAB programs that can be used to get the Laplace transformed solutions, take their inverse Laplace transforms, and plot the solutions along the time or frequency axis. The MATLAB programs can save a lot of time and effort for obtaining the solutions in the time domain or frequency domain so that readers can concentrate on establishing circuit equations, gaining insights to the problems, and making observations/interpretations of the solutions. 3. This book also introduces step by step how to use OrCAD/PSpice for circuit simulations. For circuit problems taking much time to solve by hand, the readers are recommended to use MATLAB and PSpice. This approach gives the readers not only information about the state of the art, but also self-confidence on the condition that the graphical solutions obtained by using the two software tools agree with each other. The OrCAD/PSpice is introduced in the Appendix. However, the portion of MATLAB and PSpice is kept not large lest the readers should be addicted to just using the software and tempted to neglect the importance of the basic circuit theory. 4. We make each example show something different from other examples so that readers can efficiently acquire the essential circuit analysis techniques and gain insights into the various types of circuits. On the other hand, instead of repeating similar exercise problems, we make most exercise problems arouse readers’ interest in practical application or help form a view for circuit application and design. 5. For representative examples, the analytical solutions are presented together with the results of MATLAB analysis (close to the theory) and PSpice simulation (close to the experiment) in the form of trinity. We are sure that this style of presentation will interest many students, attracting their attention to the topics on circuits efficiently. 6. Unlike most circuit books with a similar title, our book deals with positive-feedback op-amp circuits as well as negative-feedback op-amp circuits.

Download or read book Digital Circuits Laboratory Manual written by Farzin Asadi and published by Springer Nature. This book was released on 2023-08-30 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital systems are an important part of modern life. This book introduces the basic building blocks of digital systems and how these blocks can be used to design a digital system. It can be used as a laboratory manual for courses such as Digital Logic and Digital Electronics. All of the experiments in this book can be done in a simulation environment like: Proteus® or NI® MultiSim® or on the breadboard in a real laboratory environment.

Download or read book Circuit Analysis II written by Steven T. Karris and published by Orchard Publications. This book was released on 2003 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for use in a second course in circuit analysis, this text engages a full spectrum of circuit analysis related subjects ranging from the most abstract to the most practical. Featured are methods of expressing signals in terms of the elementary functions, an introduction to second order circuits, and several examples of analysing electric circuits using Laplace transformation methods. Though not written explicitly to be used with MATLAB, this text provides many useful tips and strategies for MATLAB, allowing students to get the most out of the popular program. All of the information provided is designed to be covered in one semester or two quarters.

Download or read book Advanced Circuit Simulation using Multisim Workbench written by David Baez-Lopez and published by Morgan & Claypool Publishers. This book was released on 2012-02-01 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multisim is now the de facto standard for circuit simulation. It is a SPICE-based circuit simulator which combines analog, discrete-time, and mixed-mode circuits. In addition, it is the only simulator which incorporates microcontroller simulation in the same environment. It also includes a tool for printed circuit board design. Advanced Circuit Simulation Using Multisim Workbench is a companion book to Circuit Analysis Using Multisim, published by Morgan & Claypool in 2011. This new book covers advanced analyses and the creation of models and subcircuits. It also includes coverage of transmission lines, the special elements which are used to connect components in PCBs and integrated circuits. Finally, it includes a description of Ultiboard, the tool for PCB creation from a circuit description in Multisim. Both books completely cover most of the important features available for a successful circuit simulation with Multisim. Table of Contents: Models and Subcircuits / Transmission Lines / Other Types of Analyses / Simulating Microcontrollers / PCB Design With Ultiboard

Download or read book Computational Electronic Circuits written by Sotoudeh Hamedi-Hagh and published by Springer Nature. This book was released on 2021-08-01 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook teaches in one, coherent presentation the three distinct topics of analysis of electronic circuits, mathematical numerical algorithms and coding in a software such as MATLAB®. By combining the capabilities of circuit simulators and mathematical software, the author teaches key concepts of circuit analysis and algorithms, using a modern approach. The DC, Transient, AC, Noise and behavioral analyses are implemented in MATLAB to study the complete characteristics of a variety of electronic circuits, such as amplifiers, rectifiers, hysteresis circuits, harmonic traps and passes, polyphaser filters, directional couplers, electro-static discharge and piezoelectric crystals. This book teaches basic and advanced circuit analysis, by incorporating algorithms and simulations that teach readers how to develop their own simulators and fully characterize and design electronic circuits. Teaches students and practitioners DC, AC, Transient, Noise and Behavioral analyses using MATLAB; Shows readers how to create their own complete simulator in MATLAB by adding materials learned in all 6 chapters of the book; Balances theory, math and analysis; Introduces many examples such as noise minimization, parameter optimization, power splitters, harmonic traps and passes, directional couplers, polyphase filters and electro-static discharge that are hardly referenced in other textbooks; Teaches how to create the fundamental analysis functions such as linear and nonlinear equation solvers, determinant calculation, random number generation and Fast Fourier transformation rather than using the built-in native MATLAB codes.

Download or read book Basic Engineering Circuit Analysis Study Guide with Computer Simulation Techniques for Excel MATLAB and PSpice written by J. David Irwin and published by Wiley. This book was released on 2005-11-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Irwin's Basic Engineering Circuit Analysis has built a solid reputation for its highly accessible presentation, clear explanations, and extensive array of helpful learning aids. Now in a new Eighth Edition, this highly-accessible book has been fine-tuned and revised, making it more effective and even easier to use. It covers such topics as resistive circuits, nodal and loop analysis techniques, capacitance and inductance, AC steady-state analysis, polyphase circuits, the Laplace transform, two-port networks, and much more. For over twenty years, Irwin has provided readers with a straightforward examination of the basics of circuit analysis, including: Using real-world examples to demonstrate the usefulness of the material. Integrating MATLAB throughout the book and includes special icons to identify sections where CAD tools are used and discussed. Offering expanded and redesigned Problem-Solving Strategies sections to improve clarity. A new chapter on Op-Amps that gives readers a deeper explanation of theory. A revised pedagogical structure to enhance learning.

Download or read book Essential Circuit Analysis Using Proteus written by Farzin Asadi and published by Springer Nature. This book was released on 2022-10-31 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a compact but comprehensive treatment that guides students through the analysis of circuits, using Proteus®. The book focuses on solving problems using updated market-standard software, corresponding to all key concepts covered in the classroom. The author uses his extensive classroom experience to guide students toward a deeper understanding of key concepts while they gain facility with the software they will need to master for later studies and practical use in their engineering careers. The book includes detailed exercises and examples that provide better grasping to students. This book will be ideal as a hands-on source for courses in computer-aided circuit simulation, circuits, electronics, digital logic, and power electronics. Though written primarily for undergraduate and graduate students, the text will also be useful to Ph.D. scholars and practitioners in engineering who are working on Proteus.