Download or read book How is Your MPA Doing written by Robert S. Pomeroy and published by IUCN. This book was released on 2004 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidebook which aims to improve MPA management by providing a framework that links the goals and objectives of MPAs with indicators that measure management effectiveness. The framework and indicators were field-tested in 18 sites around the world, and results of these pilots were incorporated into the guidebook. Published as a result of a 4-year partnership of IUCN's World Commission on Protected Areas-Marine, World Wildlife Fund, and the NOAA National Ocean Service International Program Office.
Download or read book Probability and Statistics for Computer Science written by James L. Johnson and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and thorough development of both probability and statistics for serious computer scientists; goal-oriented: "to present the mathematical analysis underlying probability results" Special emphases on simulation and discrete decision theory Mathematically-rich, but self-contained text, at a gentle pace Review of calculus and linear algebra in an appendix Mathematical interludes (in each chapter) which examine mathematical techniques in the context of probabilistic or statistical importance Numerous section exercises, summaries, historical notes, and Further Readings for reinforcement of content
Download or read book Nanotechnology Principles and Practices written by Sulabha K. Kulkarni and published by Springer. This book was released on 2014-11-03 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the rapid advances in the field, this book offers an up-to-date introduction to nanomaterials and nanotechnology. Though condensed into a relatively small volume, it spans the whole range of multidisciplinary topics related to nanotechnology. Starting with the basic concepts of quantum mechanics and solid state physics, it presents both physical and chemical synthetic methods, as well as analytical techniques for studying nanostructures. The size-specific properties of nanomaterials, such as their thermal, mechanical, optical and magnetic characteristics, are discussed in detail. The book goes on to illustrate the various applications of nanomaterials in electronics, optoelectronics, cosmetics, energy, textiles and the medical field and discusses the environmental impact of these technologies. Many new areas, materials and effects are then introduced, including spintronics, soft lithography, metamaterials, the lotus effect, the Gecko effect and graphene. The book also explains the functional principles of essential techniques, such as scanning tunneling microscopy (STM), atomic force microscopy (AFM), scanning near field optical microscopy (SNOM), Raman spectroscopy and photoelectron microscopy. In closing, Chapter 14, ‘Practicals’, provides a helpful guide to setting up and conducting inexpensive nanotechnology experiments in teaching laboratories.
Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.
Download or read book Nanofabrication written by Zheng Cui and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the most up-to-date information and development in the Nanofabrication area. It presents a one-stop description at the introduction level on most of the technologies that have been developed which are capable of making structures below 100nm. Principles of each technology are introduced and illustrated with minimum mathematics involved. The book serves as a practical guide and first hand reference for those working in nanostructure fabrication.
Download or read book The Forests of Norbio written by Giuseppe Dessì and published by Houghton Mifflin Harcourt P. This book was released on 1975 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanochemistry written by Geoffrey A Ozin and published by Royal Society of Chemistry. This book was released on 2023-01-17 with total page 875 pages. Available in PDF, EPUB and Kindle. Book excerpt: International interest in nanoscience research has flourished in recent years, as it becomes an integral part in the development of future technologies. The diverse, interdisciplinary nature of nanoscience means effective communication between disciplines is pivotal in the successful utilization of the science. Nanochemistry: A Chemical Approach to Nanomaterials is the first textbook for teaching nanochemistry and adopts an interdisciplinary and comprehensive approach to the subject. It presents a basic chemical strategy for making nanomaterials and describes some of the principles of materials self-assembly over 'all' scales. It demonstrates how nanometre and micrometre scale building blocks (with a wide range of shapes, compositions and surface functionalities) can be coerced through chemistry to organize spontaneously into unprecedented structures, which can serve as tailored functional materials. Suggestions of new ways to tackle research problems and speculations on how to think about assembling the future of nanotechnology are given. Primarily designed for teaching, this book will appeal to graduate and advanced undergraduate students. It is well illustrated with graphical representations of the structure and form of nanomaterials and contains problem sets as well as other pedagogical features such as further reading, case studies and a comprehensive bibliography.
Download or read book Radiocarbon and Archaeology written by Thomas Higham and published by . This book was released on 2004 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiocarbon dating covers the most recent span of geo-archaeological time, back to c.55,000 years BP. The list of applications and disciplines it can be used for is wide-ranging and burgeoning. It is used widely in dating aspects of the Earth's environmental, oceanographic and atmospheric systems. It is used as a tracer in investigating residence times of carbon in soils, rivers, oceans and lakes, and to document the movements of oceanic water and its circulation and exchange with the atmosphere. It is also used in aerosol science, and is crucial to studies of Earth's changing climate. This wide relevance of the 14C isotope means that one must be something of a polymath to understand, and it was for this reason that in 1981 the first '14C and Archaeology' Symposium was held. Its aim: to provide a wider forum for studies of prehistoric chronology than would normally be allowed at the Radiocarbon conferences. The 4th Symposium was held in Oxford in April 2002, and the proceedings that follow comprise thirty-one papers, covering archaeological dating research from the Altai to Antarctica, and from the Palaeolithic to the Medieval.
Download or read book The Mathematics Teacher in the Digital Era written by Alison Clark-Wilson and published by Springer Science & Business Media. This book was released on 2013-12-08 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the key issue of the initial education and lifelong professional learning of teachers of mathematics to enable them to realize the affordances of educational technology for mathematics. With invited contributions from leading scholars in the field, this volume contains a blend of research articles and descriptive texts. In the opening chapter John Mason invites the reader to engage in a number of mathematics tasks that highlight important features of technology-mediated mathematical activity. This is followed by three main sections: An overview of current practices in teachers’ use of digital technologies in the classroom and explorations of the possibilities for developing more effective practices drawing on a range of research perspectives (including grounded theory, enactivism and Valsiner’s zone theory). A set of chapters that share many common constructs (such as instrumental orchestration, instrumental distance and double instrumental genesis) and research settings that have emerged from the French research community, but have also been taken up by other colleagues. Meta-level considerations of research in the domain by contrasting different approaches and proposing connecting or uniting elements
Download or read book Laser Cladding of Metals written by Pasquale Cavaliere and published by Springer Nature. This book was released on 2020-11-05 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser cladding is an additive manufacturing technology capable of producing coatings due to the surface fusion of metals. The selected powder is fed into a focused laser beam to be melted and deposited as coating. This allows to apply material in a selected way onto those required sections of complex components. The process main properties are the production of a perfect metallurgically bonded and fully dense coatings; the minimal heat affected zone and low dilution between the substrate and filler material resulting in functional coatings that perform at reduced thickness, so fewer layers are applied; fine, homogeneous microstructure resulting from the rapid solidification rate that promotes wear resistance of carbide coatings; near net-shape weld build-up requires little finishing effort; extended weldability of sensitive materials like carbon-rich steels or nickel-based superalloys that are difficult or even impossible to weld using conventional welding processes; post-weld heat treatment is often eliminated as the small heat affected zone minimizes component stress; excellent process stability and reproducibility because it is numerical controlled welding process. The typical applications are the dimensional restoration; the wear and corrosion protection; additive manufacturing. The wide range of materials that can be deposited and its suitability for treating small areas make laser cladding particularly appropriate to tailor surface properties to local service requirements and it opens up a new perspective for surface engineered materials. The main key aspect to be scientifically and technologically explored are the type of laser; the powders properties; the processing parameters; the consequent microstructural and mechanical properties of the processed material; the capability of fabrication of prototypes to rapid tooling and rapid manufacturing. Distills critical concepts, methods, and applications from leading full-length chapters, along with the authors’s own deep understanding of the material taught, into a concise yet rigorous graduate and advanced undergraduate text; Reinforces concepts covered with detailed solutions to illuminating and challenging industrial applications; Discusses current and future applications of laser cladding in additive manufacturing.
Download or read book Advanced Respiratory Care written by Robert M. Kacmarek and published by . This book was released on 2000-08-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A continuation of the Advanced Ventilator Management program, these cutting-edge programs combine tutorial and simulation-style questions on advanced respiratory therapy topics. Answers with rationales are included. Self-assessment tests provide randomly generated questions so users can test what they've learned. Also included is a glossary of hyperlinked terms and a bibliography with current references and suggested readings.
Download or read book Fabrication Engineering at the Micro and Nanoscale written by Stephen A. Campbell and published by OUP USA. This book was released on 2008-01-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for advanced undergraduate or first-year graduate courses in semiconductor or microelectronic fabrication, the third edition of Fabrication Engineering at the Micro and Nanoscale provides a thorough and accessible introduction to all fields of micro and nano fabrication.
Download or read book Haemoglobinopathy Diagnosis written by Barbara J. Bain and published by John Wiley & Sons. This book was released on 2020-02-28 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated, essential guide for the laboratory diagnosis of haemoglobin disorders This revised and updated third edition of Haemoglobinopathy Diagnosis offers a comprehensive review of the practical information needed for an understanding of the laboratory diagnosis of haemoglobin disorders. Written in a concise and approachable format, the book includes an overview of clinical and laboratory features of these disorders. The author focuses on the selection, performance, and interpretation of the tests that are offered by the majority of diagnostic laboratories. The book also explains when more specialist tests are required and explores what specialist referral centres will accomplish. The information on diagnosis is set in a clinical context. The third edition is written by a leading haematologist with a reputation for educational excellence. Designed as a practical resource, the book is filled with illustrative examples and helpful questions that can aide in the retention of the material presented. Additionally, the author includes information on the most recent advances in the field. This important text: • Contains a practical, highly illustrated, approach to the laboratory diagnosis of haemoglobin disorders • Includes “test-yourself” questions and provides an indispensable tool for learning and teaching • Presents new material on antenatal screening/prenatal diagnostic services • Offers myriad self-assessment case studies that are ideal for the trainee Written for trainees and residents in haematology, practicing haematologists, and laboratory scientists, Haemoglobinopathy Diagnosis is an essential reference and learning tool that provides a clear basis for understanding the diagnosis of haemoglobin disorders.
Download or read book Lines of Light written by Daniele Del Giudice and published by . This book was released on 1989 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Teaching Patients with Low Literacy Skills written by Cecilia Conrath Doak and published by Lippincott Williams & Wilkins. This book was released on 1996 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical text guides the reader in developing the necessary tools for teaching those patients with limited literacy skills. Nurses will learn proven strategies for evaluating comprehension and teaching patients using written materials, tapes, video, computer aided instruction, visuals, and graphics. An abundance of case studies helps to demonstrate the application of teaching/learning theory to actual practice. Readers will also explore literacy issues in health care as well as the cultural impact on comprehension.
Download or read book Plant Genetic Conservation written by Nigel Maxted and published by Springer Science & Business Media. This book was released on 1997-01-31 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent development of ideas on biodiversity conservation was already being considered almost three-quarters of a century ago for crop plants and the wild species related to them, by the Russian geneticist N.!. Vavilov. He was undoubtedly the first scientist to understand the impor tance for humankind of conserving for utilization the genetic diversity of our ancient crop plants and their wild relatives from their centres of diversity. His collections showed various traits of adaptation to environ mental extremes and biotypes of crop diseases and pests which were unknown to most plant breeders in the first quarter of the twentieth cen tury. Later, in the 1940s-1960s scientists began to realize that the pool of genetic diversity known to Vavilov and his colleagues was beginning to disappear. Through the replacement of the old, primitive and highly diverse land races by uniform modem varieties created by plant breed ers, the crop gene pool was being eroded. The genetic diversity of wild species was equally being threatened by human activities: over-exploita tion, habitat destruction or fragmentation, competition resulting from the introduction of alien species or varieties, changes and intensification of land use, environmental pollution and possible climate change.
Download or read book Mysticism and Logic written by Bertrand Russell and published by . This book was released on 1918 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
