Download or read book The ESD Control Program Handbook written by Jeremy M. Smallwood and published by John Wiley & Sons. This book was released on 2020-11-09 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the understanding and practical skills needed to develop and maintain an effective ESD control program for manufacturing, storage, and handling of ESD sensitive components This essential guide to ESD control programs explains the principles and practice of ESD control in an easily accessible way whilst also providing more depth and a wealth of references for those who want to gain a deeper knowledge of the subject. It describes static electricity and ESD principles such as triboelectrification, electrostatic fields, and induced voltages, with the minimum of theory or mathematics. It is designed for the reader to "dip into" as required, rather than need to read cover to cover. The ESD Control Program Handbook begins with definitions and commonly used terminology, followed by the principles of static electricity and ESD control. Chapter 3 discusses ESD susceptible electronic devices, and how ESD susceptibility of a component is measured. This is followed by the “Seven habits of a highly effective ESD program”, explaining the essential activities of an effective ESD control program. While most texts mainly address manual handling of ESD susceptible devices, Chapter 5 extends the discussion to ESD control in automated systems, processes and handling, which form a major part of modern electronic manufacture. Chapter 6 deals with requirements for compliance given by the IEC 61340-5-1 and ANSI/ESD S20.20 ESD control standards. Chapter 7 gives an overview of the selection, use, care and maintenance of equipment and furniture commonly used to control ESD risks. The chapter explains how these often work together as part of a system and must be specified with that in mind. ESD protective packaging is available in an extraordinary range of forms from bags, boxes and bubble wrap to tape and reel packaging for automated processes. The principles and practice of this widely misunderstood area of ESD control are introduced in Chapter 8. The thorny question of how to evaluate an ESD control program is addressed in Chapter 9 with a goal of compliance with a standard as well as effective control of ESD risks and possible customer perceptions. Whilst evaluating an existing ESD control program provides challenges, developing an ESD control program from scratch provides others. Chapter 10 gives an approach to this. Standard test methods used in compliance with ESD control standards are explained and simple test procedures given in Chapter 11. ESD Training has long been recognised as essential in maintaining effective ESD control. Chapter 12 discusses ways of covering essential topics and how to demonstrate static electricity in action. The book ends with a look at where ESD control may go in the near future. The ESD Control Program Handbook: Gives readers a sound understanding of the subject to analyze the ESD control requirements of manufacturing processes, and develop an effective ESD control program Provides practical knowledge, as well as sufficient theory and background to understand the principles of ESD control Teaches how to track and identify how ESD risks arise, and how to identify fitting means for minimizing or eliminating them Emphasizes working with modern ESD control program standards IEC 61340-5-1 and ESD S20:20 The ESD Control Program Handbook is an invaluable reference for anyone tasked with setting up, evaluating, or maintaining an effective ESD control program, training personnel, or making ESD control related measurements. It would form an excellent basis for a University course on the subject as well as a guide and resource for industry professionals.

Download or read book Advances in Carpet Manufacture written by K K Goswami and published by Woodhead Publishing. This book was released on 2017-09-13 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carpet Manufacture, Second Edition, discusses the manufacture of carpets, an industry that has evolved over hundreds of years, also exploring the new changes and developments in textile science and manufacturing technology that occur every day. This updated edition provides revised, expanded and updated coverage of carpet manufacturing processes and applications. The book begins by reviewing the different types of carpets and their applications, also exploring the structure and properties of carpet materials. Carpet manufacturing techniques are then reviewed, including a new chapter on tufting and yarn manufacturing techniques, and design and manufacture for handmade carpets. Subsequent chapters review the development of carpets with important properties, including new chapters on carpets for acoustics and sound absorption, carpets with increased fire retardancy and those with antimicrobial and soil-resist finishes. With the variety of topics covered and its international team of contributors, the book offers a valuable and informative reference for technologists in the carpet and associated industries. However, it is also a great resource for researchers and students working in applied textile sciences. - Presented by an expert editor with many years of experience in both academic textile research and industry - Provides new research, technologies and other developments in carpet manufacture for academics and developers seeking to update their knowledge - Includes a strong focus on industry needs and developing areas with market potential

Download or read book Protecting Electronic Equipment from Electrostatic Discharge written by Edward A. Lacy and published by . This book was released on 1984 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrostatic Discharge Protection for Electronics written by Neil Sclater and published by Tab Books. This book was released on 1990 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neil Sclater offers practical advice on selecting test and control equipment, handling and storing semiconductors and other components, building static-free workstations, creating a protective environment for electronics, and much more. A complete listing of manufacturers and suppliers in included. Prior to founding his own electronics marketing research firm, Neil Sclater worked as an engineer for several leading corporations and as editor for Electronic Design and Product Engineering. He is the author of TPR's Gallium Arsenide IC Technology (No 3089).

Download or read book ESD Program Management written by G. Theodore Dangelmayer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's electronics business, managing an ESD progranris an integral part of a complete quality program. In fact, any electronics firm without an active ESD program puts itself and its customers at risk. This book illustrates one good example of the detail and dedication to quality that AT&T expects within its own operations and from its suppliers. Writing of the book began at a time when Ted Dangelmayer was burdened with many demands. These demands were from AT&T's own operations, internal suppliers, external suppliers, customers and others looking for a better understanding of the phenomenon of ESD, its impact and, most of all, ways to control and manage it. In a way, this book is a response to these demands by making available a reader friendly document that distills the hard-won experiences of Ted and AT&T. The information and methods in this book have been gained at no small cost and produce results that far exceed eXRenses. There is, however, a caveat: Success will not be obtained unless there is real management commitment. This means management must allocate the necessary resources and provide active support to ensure that training, auditing, reporting, tracking and an aggressive corrective action program all take place successfully. Ted is an internationally recognized authority, and you will benefit greatly by listening to his advice and following his recommendations.

Download or read book Strengthening Forensic Science in the United States written by National Research Council and published by National Academies Press. This book was released on 2009-07-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scores of talented and dedicated people serve the forensic science community, performing vitally important work. However, they are often constrained by lack of adequate resources, sound policies, and national support. It is clear that change and advancements, both systematic and scientific, are needed in a number of forensic science disciplines to ensure the reliability of work, establish enforceable standards, and promote best practices with consistent application. Strengthening Forensic Science in the United States: A Path Forward provides a detailed plan for addressing these needs and suggests the creation of a new government entity, the National Institute of Forensic Science, to establish and enforce standards within the forensic science community. The benefits of improving and regulating the forensic science disciplines are clear: assisting law enforcement officials, enhancing homeland security, and reducing the risk of wrongful conviction and exoneration. Strengthening Forensic Science in the United States gives a full account of what is needed to advance the forensic science disciplines, including upgrading of systems and organizational structures, better training, widespread adoption of uniform and enforceable best practices, and mandatory certification and accreditation programs. While this book provides an essential call-to-action for congress and policy makers, it also serves as a vital tool for law enforcement agencies, criminal prosecutors and attorneys, and forensic science educators.

Download or read book ANSI ESD STM97 2 Floor Materials and Footwear Voltage Measurement in Combination with a Person written by ESD Association and published by . This book was released on 2006 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Safe Management of Wastes from Health care Activities written by Yves Chartier and published by World Health Organization. This book was released on 2014 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of the WHO handbook on the safe, sustainable and affordable management of health-care waste--commonly known as "the Blue Book". The original Blue Book was a comprehensive publication used widely in health-care centers and government agencies to assist in the adoption of national guidance. It also provided support to committed medical directors and managers to make improvements and presented practical information on waste-management techniques for medical staff and waste workers. It has been more than ten years since the first edition of the Blue Book. During the intervening period, the requirements on generators of health-care wastes have evolved and new methods have become available. Consequently, WHO recognized that it was an appropriate time to update the original text. The purpose of the second edition is to expand and update the practical information in the original Blue Book. The new Blue Book is designed to continue to be a source of impartial health-care information and guidance on safe waste-management practices. The editors' intention has been to keep the best of the original publication and supplement it with the latest relevant information. The audience for the Blue Book has expanded. Initially, the publication was intended for those directly involved in the creation and handling of health-care wastes: medical staff, health-care facility directors, ancillary health workers, infection-control officers and waste workers. This is no longer the situation. A wider range of people and organizations now have an active interest in the safe management of health-care wastes: regulators, policy-makers, development organizations, voluntary groups, environmental bodies, environmental health practitioners, advisers, researchers and students. They should also find the new Blue Book of benefit to their activities. Chapters 2 and 3 explain the various types of waste produced from health-care facilities, their typical characteristics and the hazards these wastes pose to patients, staff and the general environment. Chapters 4 and 5 introduce the guiding regulatory principles for developing local or national approaches to tackling health-care waste management and transposing these into practical plans for regions and individual health-care facilities. Specific methods and technologies are described for waste minimization, segregation and treatment of health-care wastes in Chapters 6, 7 and 8. These chapters introduce the basic features of each technology and the operational and environmental characteristics required to be achieved, followed by information on the potential advantages and disadvantages of each system. To reflect concerns about the difficulties of handling health-care wastewaters, Chapter 9 is an expanded chapter with new guidance on the various sources of wastewater and wastewater treatment options for places not connected to central sewerage systems. Further chapters address issues on economics (Chapter 10), occupational safety (Chapter 11), hygiene and infection control (Chapter 12), and staff training and public awareness (Chapter 13). A wider range of information has been incorporated into this edition of the Blue Book, with the addition of two new chapters on health-care waste management in emergencies (Chapter 14) and an overview of the emerging issues of pandemics, drug-resistant pathogens, climate change and technology advances in medical techniques that will have to be accommodated by health-care waste systems in the future (Chapter 15).

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1995 with total page 1576 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Overstress EOS written by Steven H. Voldman and published by John Wiley & Sons. This book was released on 2013-08-27 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Overstress (EOS) continues to impact semiconductor manufacturing, semiconductor components and systems as technologies scale from micro- to nano-electronics. This bookteaches the fundamentals of electrical overstress and how to minimize and mitigate EOS failures. The text provides a clear picture of EOS phenomena, EOS origins, EOS sources, EOS physics, EOS failure mechanisms, and EOS on-chip and system design. It provides an illuminating insight into the sources of EOS in manufacturing, integration of on-chip, and system level EOS protection networks, followed by examples in specific technologies, circuits, and chips. The book is unique in covering the EOS manufacturing issues from on-chip design and electronic design automation to factory-level EOS program management in today’s modern world. Look inside for extensive coverage on: Fundamentals of electrical overstress, from EOS physics, EOS time scales, safe operating area (SOA), to physical models for EOS phenomena EOS sources in today’s semiconductor manufacturing environment, and EOS program management, handling and EOS auditing processing to avoid EOS failures EOS failures in both semiconductor devices, circuits and system Discussion of how to distinguish between EOS events, and electrostatic discharge (ESD) events (e.g. such as human body model (HBM), charged device model (CDM), cable discharge events (CDM), charged board events (CBE), to system level IEC 61000-4-2 test events) EOS protection on-chip design practices and how they differ from ESD protection networks and solutions Discussion of EOS system level concerns in printed circuit boards (PCB), and manufacturing equipment Examples of EOS issues in state-of-the-art digital, analog and power technologies including CMOS, LDMOS, and BCD EOS design rule checking (DRC), LVS, and ERC electronic design automation (EDA) and how it is distinct from ESD EDA systems EOS testing and qualification techniques, and Practical off-chip ESD protection and system level solutions to provide more robust systems Electrical Overstress (EOS): Devices, Circuits and Systems is a continuation of the author’s series of books on ESD protection. It is an essential reference and a useful insight into the issues that confront modern technology as we enter the nano-electronic era.

Download or read book Laboratory Biosafety Manual written by World Health Organization and published by World Health Organization. This book was released on 2004-12-28 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third edition of this manual which contains updated practical guidance on biosafety techniques in laboratories at all levels. It is organised into nine sections and issues covered include: microbiological risk assessment; lab design and facilities; biosecurity concepts; safety equipment; contingency planning; disinfection and sterilisation; the transport of infectious substances; biosafety and the safe use of recombinant DNA technology; chemical, fire and electrical safety aspects; safety organisation and training programmes; and the safety checklist.

Download or read book Handbook of Non Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2009-02-24 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture and use of the powders of non-ferrous metals has been taking place for many years in what was previously Soviet Russia, and a huge amount of knowledge and experience has built up in that country over the last forty years or so. Although accounts of the topic have been published in the Russian language, no English language account has existed until now.Six prominent academics and industrialists from the Ukraine and Russia have produced this highly-detailed account which covers the classification, manufacturing methods, treatment and properties of the non-ferrous metals ( aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, lead, tin, bismuth, noble metals and earth metals).The result is a formidable reference source for those in all aspects of the metal powder industry. - Covers the manufacturing methods, properties and importance of the following metals: aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth - Expert Russian team of authors, all very experienced - English translation and update of book previously published in Russian

Download or read book Occupational Safety and Health Guidance Manual for Hazardous Waste Site Activities written by and published by . This book was released on 1991-11 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrostatic Discharge Control Handbook for Protection of Electrical and Electronic Parts Assemblies and Equipment excluding Electrically Initiated Explosive Devices metric written by United States. Department of Defense and published by . This book was released on 1991 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial System Engineering for Drones written by Neeraj Kumar Singh and published by Apress. This book was released on 2019-07-15 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore a complex mechanical system where electronics and mechanical engineers work together as a cross-functional team. Using a working example, this book is a practical “how to” guide to designing a drone system. As system design becomes more and more complicated, systematic, and organized, there is an increasingly large gap in how system design happens in the industry versus what is taught in academia. While the system design basics and fundamentals mostly remain the same, the process, flow, considerations, and tools applied in industry are far different than that in academia. Designing Drone Systems takes you through the entire flow from system conception to design to production, bridging the knowledge gap between academia and the industry as you build your own drone systems. What You’ll LearnGain a high level understanding of drone systems Design a drone systems and elaborating the various aspects and considerations of design Review the principles of the industrial system design process/flow, and the guidelines for drone systems Look at the challenges, limitations, best practices, and patterns of system design Who This Book Is For Primarily for beginning or aspiring system design experts, recent graduates, and system design engineers. Teachers, trainers, and system design mentors can also benefit from this content.

Download or read book System Level ESD Protection written by Vladislav Vashchenko and published by Springer Science & Business Media. This book was released on 2014-03-21 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses key aspects of analog integrated circuits and systems design related to system level electrostatic discharge (ESD) protection. It is an invaluable reference for anyone developing systems-on-chip (SoC) and systems-on-package (SoP), integrated with system-level ESD protection. The book focuses on both the design of semiconductor integrated circuit (IC) components with embedded, on-chip system level protection and IC-system co-design. The readers will be enabled to bring the system level ESD protection solutions to the level of integrated circuits, thereby reducing or completely eliminating the need for additional, discrete components on the printed circuit board (PCB) and meeting system-level ESD requirements. The authors take a systematic approach, based on IC-system ESD protection co-design. A detailed description of the available IC-level ESD testing methods is provided, together with a discussion of the correlation between IC-level and system-level ESD testing methods. The IC-level ESD protection design is demonstrated with representative case studies which are analyzed with various numerical simulations and ESD testing. The overall methodology for IC-system ESD co-design is presented as a step-by-step procedure that involves both ESD testing and numerical simulations.

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques