Download or read book ESCHENAUER OPTIMIZATION METH IN STRUCTURAL DESIGN written by ESCHENAUER and published by Birkhäuser. This book was released on 1983 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Design via Optimality Criteria written by George I. N. Rozvany and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: "During the last two decades, research on structural optimization became increasingly concerned with two aspects: the application of general numeri cal methods of optimization to structural design of complex real structures, and the analytical derivation of necessary and sufficient conditions for the optimality of broad classes of comparatively simple and more or less ideal ized structures. Both kinds of research are important: the first for obvious reasons; the second, because it furnishes information that is useful in testing the validity, accuracy and convergence of numerical methods and in assess ing the efficiency of practical designs. {raquo} (Prager and Rozvany, 1977a) The unexpected death of William Prager in March 1980 marked, in a sense, the end of an era in structural mechanics, but his legacy of ideas will re main a source of inspiration for generations of researchers to come. Since his nominal retirement in the early seventies, Professor and Mrs. Prager lived in Savognin, an isolated alpine village and ski resort surrounded by some of Switzerland's highest mountains. It was there that the author's close as sociation with Prager developed through annual pilgrimages from Australia and lengthy discussions which pivoted on Prager's favourite topic of struc tural optimization. These exchanges took place in the picturesque setting of Graubunden, on the terrace of an alpine restaurant overlooking snow-capped peaks, on ski-lifts or mountain walks, or during evening meals in the cosy hotels of Savognin, Parsonz and Riom.

Download or read book Structural Optimization written by M. Save and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: After the IUTAM Symposium on Optimization in Structural Design held in Warsaw in 1973, it was clear to me that the time had come for organizing into a consistent body of thought the enormous quantity of results obtained in this domain, studied from so many different points of view, with so many different methods, and at so many levels of practical applicability. My colleague and friend Gianantonnio Sacchi from Milan and I met with Professor Prager in Savognin in July 1974, where I submitted to them my first ideas for a treatise on structural optimization: It should cover the whole domain from basic theory to practical applications, and deal with various materials, various types of structures, various functions required of the structures, and various types of cost . . Obviously, this was to be a team effort, to total three or four volumes, to be written in a balanced manner as textbooks and handbooks. Nothing similar existed at that time, and, indeed, nothing has been published to date. Professor Prager was immedi ately in favor of such a project. He agreed to write a first part on optimality criteria with me and to help me in the general organization of the series. Since Professor Sacchi was willing to write the text on variational methods, it remained to find authors for parts on the mathematical programming approach to structural optimization (and, more generally, on numerical methods) and on practical optimal design procedures in metal and concrete.

Download or read book Topology Design of Structures written by Martin P. Bendsøe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop, Sesimbra, Portugal, June 20-26, 1992

Download or read book Structural Optimization written by A. Borkowski and published by Springer Science & Business Media. This book was released on 1990-01-31 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Discretization Methods and Structural Optimization Procedures and Applications written by Hans A. Eschenauer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the Finite Element Methods FEM were more and more employed in development and design departments as very fast working tools in order to determine stresses, deformations, eigenfrequencies etc. for all kinds of constructions under complex loading conditions. Meanwhile. very effective software systems have been developed by various research teams although some mathematical problems (e. g. convergence) have not been solved satisfac torily yet. In order to make further advances and to find a common language between mathe maticians and mechanicians the "Society for Applied Mathematics and Mechanics" (GAMM) agreed on the foundation of a special Committee: "Discretization Methods in Solid Mechanics" focussing on the following problems: - Structuring of various methods (displacement functions, hybrid and mixed approaches, etc. >, - Survey of approach functions (Lagrange-/Hermite-polynominals, Spline-functions), - Description of singularities, - Convergence and stability, - Practical and theoretical optimality to all mentioned issues (single and interacting). One of the basic aims of the GAMM-Committee is the interdisciplinary cooperation between mechanicians, mathematicians, and users which shall be intensified. Thus, on September 22, 1985 the committee decided to hold a seminar on "Structural Optimization" in order to allow an exchange of experiences and thoughts between the experts of finite element methods and those of structural optimization. A GAMM-seminar entitled "Discretization Methods and Structural Optimization - Procedures and Applications" was hold on October 5-7, 1988 at the Unversity of Siegen.

Download or read book Topology Optimization in Structural Mechanics written by G.I.N. Rozvany and published by Springer. This book was released on 2014-05-04 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topology optimization is a relatively new and rapidly expanding field of structural mechanics. It deals with some of the most difficult problems of mechanical sciences but it is also of considerable practical interest, because it can achieve much greater savings than mere cross-section or shape optimization.

Download or read book Emerging Methods for Multidisciplinary Optimization written by Jan Blachut and published by Springer. This book was released on 2014-05-04 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an up-to-date overview of major advances, emerging trends, and projected industrial applications in the field of multidisciplinary optimization. It concentrates on the current status of the field, exposes commonalities, innovative, promising, and speculative methods. This book provides a view of today’s multidisciplinary optimization environment through a balenced theoretical and practical treatment. The contributors are the foremost authorities in each area of specialisation.

Download or read book Topology Design Methods for Structural Optimization written by Osvaldo M. Querin and published by Butterworth-Heinemann. This book was released on 2017-06-09 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topology Design Methods for Structural Optimization provides engineers with a basic set of design tools for the development of 2D and 3D structures subjected to single and multi-load cases and experiencing linear elastic conditions. Written by an expert team who has collaborated over the past decade to develop the methods presented, the book discusses essential theories with clear guidelines on how to use them. Case studies and worked industry examples are included throughout to illustrate practical applications of topology design tools to achieve innovative structural solutions. The text is intended for professionals who are interested in using the tools provided, but does not require in-depth theoretical knowledge. It is ideal for researchers who want to expand the methods presented to new applications, and includes a companion website with related tools to assist in further study. - Provides design tools and methods for innovative structural design, focusing on the essential theory - Includes case studies and real-life examples to illustrate practical application, challenges, and solutions - Features accompanying software on a companion website to allow users to get up and running fast with the methods introduced - Includes input from an expert team who has collaborated over the past decade to develop the methods presented

Download or read book Shape Design Sensitivity Analysis and Optimization Using the Boundary Element Method written by Zhiye Zhao and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the various aspects of shape optimization of two dimensional continuum structures, including shape design sensitivity analysis, structural analysis using the boundary element method (BEM), and shape optimization implementation. The book begins by reviewing the developments of shape optimization, followed by the presentation of the mathematical programming methods for solving optimization problems. The basic theory of the BEM is presented which will be employed later on as the numerical tool to provide the structural responses and the shape design sensitivities. The key issue of shape optimization, the shape design sensitivity analy sis, is fully investigated. A general formulation of stress sensitivity using the continuum approach is presented. The difficulty of the modelling of the ad joint problem is studied, and two approaches are presented for the modelling of the adjoint problem. The first approach uses distributed loads to smooth the concentrated adjoint loads, and the second approach employs the singu larity subtraction method to remove the singular boundary displacements and tractions from the BEM equation. A novel finite difference based approach to shape design sensitivity is pre sented, which overcomes the two drawbacks of the conventional finite difference method. This approach has the advantage of being simple in concept, and eas ier implementation. A shape optimization program for two-dimensional continuum structures is developed, including structural analysis using the BEM, shape design sensitiv ity analysis, mathematical programming, and the design boundary modelling.

Download or read book Introduction to Optimization of Structures written by N.V. Banichuk and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an exposition of the theory, techniques, and the basic formulation of structural optimization problems. The author considers applications of design optimization criteria involving strength, rigidity, stability and weight. Analytic and numerical techniques are introduced for research in optimal shapes and internal configurations of deformable bodies and structures. Problems of the optimal design of beams, systems of rods, plates and shells, are studied in detail. With regard to applications, this work is oriented towards solutions of real problems, such as reduction of the volume or weight of the material, and improvement of mechanical properties of structures. This book is written for readers specializing in applied mechanics, applied mathematics, and numerical analysis."

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1994 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reliability and Optimization of Structural Systems 91 written by Rüdiger Rackwitz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains 38 papers presented at the 4th Working Conference on "Rel iability· and Optimization of Structural Systems", held at the Technical University of Munich, Germany, September 11- 13, 1991. The Working Conference was organised by the IFIP (Interna tional Federation for Information Processing) Working Group 7.5 of Technical Committee 7 and was the fourth in a series, following similar conferences held at the University of Aalborg, Den mark, May 1987, at the Imperial College, London, UK, September 1988 and at the University of California, Berkeley, California, USA, March 1990. The Working Conference was attended by 54 participants from 16 countries. The objectives of Working Group 7.5 are: • to promote modern structural systems optimization and reliability theory, • to advance international cooperation in the field of structural system optimization and reliability theory, • to stimulate research, development and application of structural system optimization and reli ability theory, • to further the dissemination and exchange of information on reliability and optimization of structural systems • to encourage education in structural system optimization and reliability theory. At present the members of the Working Group are: A. H.-S. Ang, U.S.A. M. Grimmelt, FRG G. A ugwti, Italy N. C. Lind, Canada M. J. Baker, UK H. O. Mad&en, Denmark P. Bjerager, Norway R. E. Melcher~, Australia C. A. Cornell, U.S.A. F. Mo~e~, U.S.A.

Download or read book Optimisation of Composite Structures Design written by A Miravete and published by Elsevier. This book was released on 1996-01-01 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials have been used more and more during the last decade to lighten structures. But until now, there has been no clear way of establishing how to design properly optimised laminated composite plates with no reduction in strength. Most modern references lack adequate information for the designer wanting to tailor or synthesise a design. This exciting package offers a solution. It relates the theory of composite materials to real life and provides 'rules' for designing composites structures properly and in an optimum way.In the book, Professor Miravete demonstrates the optimisation of beams, plates and sandwich constructions in the designs of advanced composite materials. He also illustrates optimal material systems, fibre orientations and lay-up through functions of geometry, load type and boundary conditions. The associates software, on two disks, will enableusers to adapt the information to their own requirements and is very user-friendly with helpful manuals. This will be an essential package for designers and engineers in a wide range of areas, from aeronautics to automotive andmarine as well as general industry.Chapter 1 provides a general background on composite materials.Chapters 2, 3, 4, and 5 are concerned with constant thickness composite structures, and provide a survey of various design methodologies of shells, plates and sandwich constructions.Chapters 6, 7, 8 and 9 examine variable thickness composite structures, and consider beams, plates and sandwiches. - A completemanual for anyone concerned with designing composite structures - Includes book and used-friendly software - Can be easily applied to any area - aeronautics, automotive, marine or general industry

Download or read book Engineering Design Reliability Handbook written by Efstratios Nikolaidis and published by CRC Press. This book was released on 2004-12-22 with total page 1216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers in the engineering industry and academia are making important advances on reliability-based design and modeling of uncertainty when data is limited. Non deterministic approaches have enabled industries to save billions by reducing design and warranty costs and by improving quality. Considering the lack of comprehensive and defini

Download or read book The Optimum Shape written by James Bennett and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the International Symposium, "The Optimum Shape: Automated Structural Design," held at the General Motors Research Laboratories on September 3D-October 1, 1985. This was the 30th symposium in a series which the Research Laboratories began sponsoring in 1957. Each symposium has focused on a topic that is both under active study at the Research Laboratories and is also of interest to the larger technical community. While attempts to produce a structure which performs a certain task with the minimum amount of resources probably predates recorded civilization, the idea of coupling formal optimization techniques with computer-based structural analysis techniques was first proposed in the early 1960s. Although it was recognized at this time that the most fundamental description of the problem would be in terms of the shape or contours of the structure, much of the early work described the problem in terms of structural sizing parameters instead of geometrical descriptions. Within the past few years, several research groups have started to explore this more fundamental area of shape design. Initial research has raised many new questions about appropriate selection of design variables, methods of calculating derivatives, and generation of the underlying analysis problem.

Download or read book Recent Advances in Optimal Structural Design written by Scott A. Burns and published by ASCE Publications. This book was released on 2002-01-01 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored by the Technical Committee on Structural Design of the Technical Administrative Committee on Analysis and Computation of the Technical Activities Division of the Structural Engineering Institute of ASCE. This report documents the dramatic new developments in the field of structural optimization over the last two decades. Changes in both computational techniques and applications can be seen by developments in computational methods and solution algorithms, the role of optimization during the various stages of structural design, and the stochastic nature of design in relation to structural optimization. Topics include: Ømethods for discrete variable structural optimization; Ødecomposition methods in structural optimization; Østate of the art on the use of genetic algorithms in design of steel structures; Øconceptual design optimization of engineering structures; Øtopology and geometry optimization of trusses and frames; Øevolutionary structural optimization; Ødesign and optimization of semi-rigid framed structures; Øoptimized performance-based design for buildings; Ømulti-objective optimum design of seismic-resistant structures; and Øreliability- and cost-oriented optimal bridge maintenance planning. The book concludes with an extensive bibliography of journal papers on structural optimization published between 1987 and 1999.