Download or read book Erosion Corrosion in Pipe Flows of Particle Laden Liquids written by Robert Wood and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transmission of particle-bearing liquids in pipes has motivated continuing research into erosion mechanisms and the distribution of erosion rates over wetted surfaces. This chapter covers these initiatives with particular reference to erosion-corrosion modelling within bends and straight sections of cylindrical pipes manufactured in a variety of materials and transporting a variety of liquids. Erosion-corrosion modelling techniques such as submerged slurry jets and rotating cylinder electrodes have been used to study factors influencing material degradation. Improvements in computational fluid dynamics (CFD), such as the development of a moving deforming mesh (MDM) have improved the accuracy of CFD models in predicting pipe wall erosion rates. Combined discrete phase tracking approaches such as the CFD-DPM-DEM (discrete phase-discrete element model) have helped improve computational efficiency. Wall impact erosion models are calibrated using laboratory scale tests. Validation of CFD models using full-scale test data is rare, meaning their accuracy is still largely unreported. Material testing has helped to identify the resilience of prospective pipeline materials to erosion-corrosion, while modifications to internal geometry and pipe section have shown potential to improve erosion-corrosion resistance.
Download or read book Erosion corrosion in Disturbed Liquid particle Flow written by Joshua F. Addis and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Erosion Corrosion and Synergistic Effects in Disturbed Liquid particle Flow written by Ramakrishna Malka and published by . This book was released on 2005 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Slurry Technology written by Trevor Frank Jones and published by BoD – Books on Demand. This book was released on 2023-11-02 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts from around the world, this book presents a comprehensive overview of slurry technology. The editor is grounded in the science of dilute concentrations of coarse particles in horizontal ducts, including settling distributions, critical deposition, swirling flow, and the two-layer model. This volume includes ten chapters that address such topics as process modelling, measurement (including non-Newtonian rheology), high-concentration conveying, vertical transport of fine-particle slurries, rheometry of sludges, pipe wear, and wastewater applications. There is also a chapter on an application at the fringe of our subject: fluidisation.
Download or read book Particle Containing Formation Water for the Study of Erosion Corrosion written by E. Heitz and published by . This book was released on 1988 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mass loss rates of a 13% chromium steel have been determined in particle-containing formation water using a loop with a constricted pipe as a test section. Erosion corrosion rates increase approximately with the square of the flow rate and linearly with the sand content. Under CO2-corrosion conditions, changes of the particle parameters (size, concentration) are much more significant than medium parameters (chloride content, temperature).
Download or read book Slurry Erosion written by John Evans Miller and published by ASTM International. This book was released on 1987 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oil and Gas Pipelines written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2015-04-20 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and detailed reference guide on the integrity and safety of oil and gas pipelines, both onshore and offshore Covers a wide variety of topics, including design, pipe manufacture, pipeline welding, human factors, residual stresses, mechanical damage, fracture and corrosion, protection, inspection and monitoring, pipeline cleaning, direct assessment, repair, risk management, and abandonment Links modern and vintage practices to help integrity engineers better understand their system and apply up-to-date technology to older infrastructure Includes case histories with examples of solutions to complex problems related to pipeline integrity Includes chapters on stress-based and strain-based design, the latter being a novel type of design that has only recently been investigated by designer firms and regulators Provides information to help those who are responsible to establish procedures for ensuring pipeline integrity and safety
Download or read book Overview of Methods Available for Particle free Erosion Corrosion Testing in Flowing Liquids written by British Standards Institution and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Abrasive Erosion Corrosion of Hydraulic Machinery written by Changguo Duan and published by World Scientific Publishing Company. This book was released on 2002-01-01 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic exposition of abrasive erosion and corrosion of hydraulic machinery in both theory and engineering practice.
Download or read book Tracked Changes Overview of Methods Available for Particle free Erosion Corrosion Testing in Flowing Liquids written by British Standards Institution and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Erosion of Materials by Liquid Flow written by and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy and Sustainability VII written by C.A. Brebbia and published by WIT Press. This book was released on 2017-12-11 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers presented at the 7th International Conference on Energy and Sustainability, this volume includes collaborative research between different disciplines, including materials, energy networks, new energy resources, storage solutions, waste to energy systems, smart grids and many other related subjects. Energy production and distribution matters as well as the need to respond to the modern world’s dependency on conventional fuels are topics of growing importance. The use of fossil fuels has generated an increasing amount of interest in renewable energy resources and the search for maintainable energy policies. Energy policies and management are of primary importance to achieve the development of sustainability and need to be consistent with recent advances in energy production and distribution. Challenges lie as much in the conversion from renewable energies such as wind and solar to useful forms like electricity, heat and fuel at an acceptable cost (including environmental damage) as in the integration of these resources into an existing infrastructure. A range of topics are covered, including: Energy policies; Renewable energy resources; Sustainable energy production; Environmental risk management; Green buildings; Energy storage; Energy management; Biomass and biofuels; Waste to energy; Processing of oil and gas; CO2 capturing and management; Pipelines; Energy efficiency; Smart grids; Energy and transport; Case studies.
Download or read book Dit zijn de thien outheden des menschen te rekenen van alle X jaren tot thien jaren tot hondert jaren toe want tot alle thien jaren veranderen die sinnen ende natueren der menschen written by S.n. (Rotterdam) and published by . This book was released on 1605 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Slurry Flow written by C A Shook and published by Elsevier. This book was released on 2013-10-22 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Slurry Flow: Principles and Practice describes the basic concepts and methods for understanding and designing slurry flow systems, in-plan installations, and long-distance transportation systems. The goal of this book is to enable the design or plant engineer to derive the maximum benefit from a limited amount of test data and to generalize operating experience to new situations. Design procedures are described in detail and are accompanied by illustrative examples needed by engineers with little or no previous experience in slurry transport. The technical literature in this field is extensive: this book facilitates its use by surveying current research results and providing explanations of mechanistic flow models. This discussion of background scientific principles helps the practitioner to better interpret test data, select pumps, specify materials of construction, and choose measuring devises for slurry transport systems. The extensive range of topics covered in Slurry Flow: Principles and practice includes slurry rheology, homogeneous and heterogeneous slurry flow principles, wear mechanisms, pumping equipment, instrumentation, and operating aspects.
Download or read book Facilitating Rapid Process Improvement Workshops written by Sheilah P. O'Brien and published by CRC Press. This book was released on 2021-05-27 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a self-study guide for facilitators of rapid process improvement workshops that helps anyone who feels like they aren’t truly gaining the full results of improvement initiatives and kaizen events. They know they can do better, but don’t know how. The author, an experienced facilitator in government and nonprofits, speaks to the facilitator through coaching notes and actual workshop documents and techniques so the reader can fully understand how greater results are achieved. This guide takes the reader through a step-by-step path of a newly created workshop agenda. The author has parsed the workshop path into more manageable parts, easier for both the facilitator and the team. These parts split the improvement work into two sections: "removing the unnecessary" and "smoothing out the flow." "Smoothing out the flow" is divided further into: When the work is coming in When the product/person is going through the process How the work is performed In addition, the author includes newly created tools and training content. For example, a data-gathering table points the facilitator to what data need to be collected when. Training for the team includes making sure they understand the structure of a process as well as to instruct them and define how a Lean process actually functions. This distinction is important because all improvements are not necessarily Lean improvements. Several bodies of knowledge are incorporated into this guide––not only Lean and Six Sigma, but internal auditing, organizational development, and statistics. Essentially, this guide includes tips, nuances, and original tools that are missing from the traditional training of facilitators of kaizen events. It provides enough information for the facilitator to think in a creative way.
Download or read book Multiphase Flow Handbook written by Clayton T. Crowe and published by CRC Press. This book was released on 2005-09-19 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the importance of multiphase flows in a wide variety of industries, including power, petroleum, and numerous processing industries, an understanding of the behavior and underlying theoretical concepts of these systems is critical. Contributed by a team of prominent experts led by a specialist with more than thirty years of experience, the Multiphase Flow Handbook provides such an understanding, and much more. It covers all aspects of multiphase flows, from fundamentals to numerical methods and instrumentation. The book begins with an introduction to the fundamentals of particle/fluid/bubble interactions followed by gas/liquid flows and methods for calculating system parameters. It includes up-to-date information on practical industrial applications such as boiling and condensation, fluidized beds, aerosols, separation systems, pollution control, granular and porous media flow, pneumatic and slurry transport, and sprays. Coverage then turns to the most recent information on particle/droplet-fluid interactions, with a chapter devoted to microgravity and microscale flows and another on basic multiphase interactions. Rounding out the presentation, the authors discuss numerical methods, state-of-the art instrumentation, and advanced experimental techniques. Supplying up-to-date, authoritative information on all aspects of multiphase flows along with numerous problems and examples, the Multiphase Flow Handbook is the most complete reference available for understanding the flow of multiphase mixtures.
Download or read book Encyclopedia of Chemical Processing and Design written by John J. McKetta Jr and published by CRC Press. This book was released on 1997-05-05 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trays versus Packings in Separator Design to Underground Gas Storage
