Download or read book Ergonomics and Safety in Hand Tool Design written by Charles A. Cacha and published by CRC Press. This book was released on 1999-02-26 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses exclusively on ergonomics in the design and use of hand tools. Hand tools have been an integral supplement to the human hand since the beginning of civilization. Recently, they have been pinpointed as a prominent cause of workplace disease. Cumulative Trauma Disorders such as Tendonitus, Carpal Tunnel Syndrome, and Raynaud's Syndrome are caused by the specialization of motion employed when using a screw driver, the shock to the hand and wrist when a hammer strikes a nail, or the vibration of a power saw. Ergonomics and Safety in Hand Tool Design explores the relationship between Biomechanics, Safety, and Ergonomics allowing the reader to recognize, evaluate, and control ergonomic risk factors and improve hand tool design. After a history of hand tool use and design, the book is broken down by the various disciplines as they apply to hand tools, taking a broad approach. The author gives special attention to safe design and use, illustrated with detailed diagrams. The text serves as a guide to the human factors in safety and ergonomics for safety professionals.
Download or read book Ergonomic Principles in the Design of Hand Tools written by Thomas Morris Fraser and published by . This book was released on 1980 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Workers and Their Tools written by Leo Greenberg and published by . This book was released on 1977 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessment of the Ergonomic Quality of Hand held Tools and Computer Input Devices written by Helmut Strasser and published by IOS Press. This book was released on 2007 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Ergonomics Association (IEA) is currently developing standards for Ergonomic Quality in Design (EQUID) which primarily intends to promote ergonomics principles and the adaptation of a process approach for the development of products, work systems and services. It is important to assess the ergonomic quality of products, hand-held tools and computer input devices through working processes that represent reality. Well-designed working tools can be expected to reduce or eliminate fatigue, discomfort, accidents and health problems and they can lead to improvements in productivity and quality. Furthermore, absenteeism, job turnover and training costs can positively be influenced by the working tools and the environment. Not all these short-term and long-term issues of working tools can be quantified in pragmatically oriented ergonomic research approaches. But multi-channel electromyography, which enables the measurement of the physiological costs of the muscles involved in handling tools during standardized working tests, and subjective assessments of experienced subjects enable a reliable insight in the essential ergonomic criteria of working tools and products. In this respect it is advantageous to provide a test procedure, in which working tests can be carried out alternating both with test objects and reference models.
Download or read book Hand Tools Ergonomics of Tool Design written by Canada. Canadian Centre for Occupational Health and Safety and published by . This book was released on 1987 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Work Space Equipment and Tool Design written by A. Mital and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the ergonomic aspect of many problems facing the industry today attracts more attention from the management, providing scientific knowledge and the know-how to solve such problems is becoming increasingly more important. The impetus for this book originated from the pressing need to make the state-of-the-art ergonomic information on workspace, equipment and tool design available to practising ergonomists, safety specialists, engineering designers, and business and technical managers. The book reinforces the notion that ergonomic data should be explicitly integrated in the design of a system, and should become an indispensable part of the overall design process in production engineering, on an equal basis with such activities as mechanical component design, quality assurance, maintenance, inspection, etc. The focus is on selected ergonomic data for workspace, equipment and tool design, with special emphasis on the practical aspects of applying the available information to specific problem areas.
Download or read book Powered Hand Tools Ergonomics of Tool Design written by Canada. Canadian Centre for Occupational Health and Safety and published by . This book was released on 1987 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Strategy for Industrial Power Hand Tool Ergonomic Research Design Selection Installation and Use in Automotive Manufacturing written by and published by . This book was released on 1995 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ergonomic Principles Basic to Hand Tool Design written by E. R. Tichauer and published by . This book was released on 1977 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ergonomic Design for Material Handling Systems written by Karl H.E. Kroemer and published by CRC Press. This book was released on 2017-12-01 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ergonomics focus is on how to design work tasks, tools, and environments to fit the capabilities and limitations of people. Ergonomic Design for Material Handling Systems describes how ergonomics can be applied specifically to load handling, both in the original design of systems and in their modification to make jobs easier and safer. Proven techniques (such as flow charting, or job analysis) are combined with new considerations (such as biomechanics and repetitive trauma) to optimize facility, work station, equipment, and job procedures. Ergonomic Design for Material Handling Systems shows how ergonomics overlaps and intertwines with traditional engineering and management, uniting them to produce ease and efficiency in material handling. This book demonstrates how to lay out facilities in order to achieve the most efficient and safe design. It tells how to organize tasks, machinery, people, and materials to improve work flow and "humanize" your workplaces. Consideration of human needs and abilities contributes essentially to successful performance-let this practical book be your guide.
Download or read book Occupational Ergonomics written by Theresa Stack and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The approach to the book is analogous to a toolkit. The user will open the book and locate the tool that best fits the ergonomic assessment task he/she is performing. The chapters of the book progress from the concept of ergonomics, through the various assessment techniques, and into the more complex techniques. In addition to discussing the techniques, this book presents them in a form that the readers can readily adapt to their particular situation. Each chapter, where applicable, presents the technique discussed in that chapter and demonstrates how it is used. The supporting material at the end of each chapter contains exercises, case studies and review questions. The case study section of the book presents how to use techniques to analyze a range of workplace scenarios. Topics include: The Basics of Ergonomics; Anthropometry; Office Ergonomics; Administrative Controls; Biomechanics; Hand Tools; Vibration; Workstation Design; Manual Material Handling; Job Requirements and Physical Demands Survey; Ergonomic Survey Tools; Work-related Musculoskeletal Disorders; How to Conduct an Ergonomics Assessment; and Case Studies
Download or read book Ergonomics in Caring for People written by Gaur G. Ray and published by Springer. This book was released on 2017-10-06 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select proceedings of the International Conference on Humanizing Work and Work Environment organized by the Indian Society of Ergonomics. The book presents research findings on different areas of ergonomics for developing appropriate tools and work environment considering capabilities and limitations of working people for maximum effectiveness on their performance. The volume is divided into several sections focusing on different ergonomic research activities currently being undertaken at both national and international levels. Considering the high diversity among researchers contributing to this volume, it should prove to be a valuable collection of different approaches that contemporary researchers are adopting on the theme of caring for the people and humanizing work and work environment.
Download or read book Hand Tool Ergonomics written by U. Venkata Kiran and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers practical introduction for anyone to conduct ergonomic evaluation of hand tools to improve their performance, comfort and efficiency.People get used to these unergonomic conditions and encounter even extreme occupational hazards by unknowingly adapting bad postures in their normal work cycle. This book is an attempt to successful application of ergonomic principles to overcome the hazardous features of hand tools. The case analysis undertaken with a special reference to kitchen tools is an additional asset of this book which in detail explains all the design flaws in the existing tools and the design features to be incorporated to overcome those flaws leading to enhancement of user's safety, comfort and efficiency. The book includes multiparametric ergonomic analysis of hand tools emphasizing the biomechanical, anthropometric and psychological aspects providing greater knowledge about qualitative as well as quantitative evaluation techniques. The techniques are explained in detail to enable any ergonomic professional designing to take up work on hand tools.This book provides valuable professional with technique and useful to the general reading public.
Download or read book Kodak s Ergonomic Design for People at Work written by The Eastman Kodak Company and published by John Wiley & Sons. This book was released on 2003-10-10 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for those who are on the job but not necessarily professionally trained ergonomists, the principles and approaches detailed in this highly regarded guide have all been implemented in real-world workplace environments and proven successful in reducing the potential for occupational injury, increasing the number of people who can perform a job, and improving employee performance on the job. More than 150 clear and informative illustrations and tables help convey data and information in eight sections: Ergonomics design philosophy Human reliability and information transfer Evaluation of job demands Work design Workplace design Manual handling in occupational tasks Equipment design Environment
Download or read book Ergonomic Design for People at Work Workplace equipment and environmental design and information transfer written by Eastman Kodak Company. Human Factors Section and published by Wadsworth Publishing Company. This book was released on 1983 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ergonomic Checkpoints written by International Labour Office and published by International Labour Organization. This book was released on 1996 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared in collaboration with the International Ergonomics Association, this book presents a compilation of 128 illustrated ideas which identify practical and inexpensive solutions to ergonomic problems in the workplace. The checkpoints can be used either to check working conditions on the spot or at the design stage, and are suited to a wide variety of premises. Each checkpoint indicates an action, explains why it is necessary, gives advice on its implementation and other relevant information. Ergonomic issues covered include: materials storage and handling; hand tools; machine safety; improving workstation design; lighting; premises; control of hazardous substances; welfare facilities; and work organisation.
Download or read book Ergonomics and Design written by Scott Openshaw and published by . This book was released on 2007-08-01 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interaction between the user & the product is one of the primary concerns of the product design process. While there are many different methods of ergonomic research & theory used to develop products that solve common workplace problems, this reference helps to clarify some of the concepts & methodologies that Allsteel Inc. used in its process. The goal is to provide a better understanding of how the science of Ergonomics is used to make products that help employees work more comfortably, efficiently, & effectively. Contents: Product Design Ergonomics 101; Anthropometric Measurements; Common Workplace Postures; Common Workplace Motions; Office Furniture Guidelines for Fit & Function; & Universal Design Considerations.
