Download or read book Ergonomic Trends from the East written by Masaharu Kumashiro and published by CRC Press. This book was released on 2010-08-09 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term "Human Engineering" was first used in America at the beginning of the twentieth century and was renamed "Human Factors" after World War II. It continous to develop to this day. After it spread to Europe, interest in the subject increased further and was renamed "Ergonomics" in England. Ergonomics is now starting to flourish in East Asia. T

Download or read book New Ergonomics Perspective written by Sakae Yamamoto and published by CRC Press. This book was released on 2015-01-06 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Ergonomics Perspective represents a selection of the papers presented at the 10th Pan-Pacifi c Conference on Ergonomics (PPCOE), held in Tokyo, Japan, August 25-28, 2014.The first Pan-Pacific Conference on Occupational Ergonomics was held in 1990 at the University of Occupational and Environmental Health, Japan. The main theme of the PPCOE 1990

Download or read book Evolution of Marine Coastal Ecosystems under the Pressure of Global Changes written by Hubert-Jean Ceccaldi and published by Springer Nature. This book was released on 2020-06-15 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coastal and estuarine environments at the interface of terrestrial and marine areas are among the most productive in the world. However, since the beginning of the industrial era, these ecosystems have been subjected to strong anthropogenic pressures intensified from the second half of the 20th century, when there was a marked acceleration in the warming (climate change) of the continents, particularly at high latitudes. Coastal ecosystems are highly vulnerable to alteration of their physical, chemical and biological characteristics (marine intrusion, acidification of marine environments, changes in ecosystems, evolution and artificialization of the coastline, etc.).In contact with heavily populated areas, these environments are often the receptacle of a lot of chemical and biological pollution sources that significantly diminish their resilience. In this context of accelerated evolution and degradation of these areas important for food security of many populations around the world, it is necessary to better identify the factors of pressure and understand, at different scales of observation, their effects and impacts on the biodiversity and on the socio-eco-systems, in order to determine the degree of vulnerability of these coastal ecosystems and the risks they face. A transdisciplinary and integrated approach is required to prevent risks. Within this framework, operational coastal oceanography occupies an important place but also the implementation of a true socio-eco-system approach in order to set up an environmentally friendly development.

Download or read book Advances in Occupational Ergonomics and Safety written by Shrawan Kumar and published by IOS Press. This book was released on 1998 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ergonomics touches every man, woman and child each day of their lives whether they recognise it or not. Ergonomics (or lack of it) plays a more significant role in the lives of about two-thirds of the world s population over 10 years of age who work for one-third of their lives to make a living. There are 120 million occupational accidents and injuries and 200,000 fatalities each year according to WHO 95. Occupational accidents, injuries and fatalities are undesired events. The occupational activities are planned and designed, and executed with a purpose under supervision but accidents are not. Hence it stands to reason that better planning, design and execution will help to reduce these undesirable outcomes. One must also recognise that under global scheme of biological evolution, the human beings were not designed to endure a life long exposure to artificial activities repetitively. Thus occupational health problems are inevitable if we do not return to nature for our sustenance. As a society, we have chosen to live and work as we do. In fact, there is a far rapid evolution (mutation and speciation) of occupations than of any biological organism. This places us in a situation where better planning, design and execution of our occupational activities have become absolute necessity. However, since ergonomics is a modifier and not a causal factor, its significance does not become immediately apparent to us. Perhaps it is for this reason that even in developed world occupational health services are available to between 20% to 50% of the work force and less than 10% of the workforce in the developing countries. Occupational health services are remedial approaches. The rational wisdom of the human race should strive to get proactive control of undesirable outcomes through ergonomics. Unfortunately, it is sadly lacking even today. On an optimistic note one can observe that its presence and application is slowly increasing.

Download or read book Proceedings of the 20th Congress of the International Ergonomics Association IEA 2018 written by Sebastiano Bagnara and published by Springer. This book was released on 2018-08-10 with total page 2141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018), held on August 26-30, 2018, in Florence, Italy. By highlighting the latest theories and models, as well as cutting-edge technologies and applications, and by combining findings from a range of disciplines including engineering, design, robotics, healthcare, management, computer science, human biology and behavioral science, it provides researchers and practitioners alike with a comprehensive, timely guide on human factors and ergonomics. It also offers an excellent source of innovative ideas to stimulate future discussions and developments aimed at applying knowledge and techniques to optimize system performance, while at the same time promoting the health, safety and wellbeing of individuals. The proceedings include papers from researchers and practitioners, scientists and physicians, institutional leaders, managers and policy makers that contribute to constructing the Human Factors and Ergonomics approach across a variety of methodologies, domains and productive sectors. This volume includes papers addressing the following topics: Ergonomics in Design, Activity Theories for Work Analysis and Design, and Affective Design.

Download or read book Advances in Ergonomics in Design written by Francisco Rebelo and published by Springer. This book was released on 2018-06-23 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a timely snapshot of ergonomics research and methods applied to the design, development and prototyping – as well as the evaluation, training and manufacturing – of products, systems and services. Combining theoretical contributions, case studies, and reports on technical interventions, it covers a wide range of topics in ergonomic design including: ecological design; educational and game design; cultural and ethical aspects in design; user research and human–computer interaction in design; as well as design for accessibility and extreme environments, and many others. The book particularly focuses on new technologies such as virtual reality, state-of-the-art methodologies in information design, and human–computer interfaces. Based on the AHFE 2018 International Conference on Ergonomics in Design, held on July 21–25, 2018, in Orlando, Florida, USA, the book offers a timely guide for both researchers and design practitioners, including industrial designers, human–computer interaction and user experience researchers, production engineers and applied psychologists.

Download or read book Reconstructing the Middle East written by Abdulwahab Alkebsi and published by Taylor & Francis. This book was released on 2017-02-24 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is clear by now that the label ‘Arab Spring’ has proven too simplistic to describe the uprisings that upended the political order of the Arab world in late 2010. Brutal crackdowns and civil conflict in Syria, Libya, and Yemen dashed the hopes that peaceful democratic revolutions would sweep the region. In other countries, the departure of authoritarian leaders led to many false starts without producing democratic conclusions. Societies that had appeared united in opposition suddenly seemed fractious. Youth were once again banished to the political margins. ‘Reconstructing the Middle East’ examines the changes that happened within the region from 2010 and the long-term challenges and opportunities they present. Featuring the work of authors with a diversity of perspectives, most of whom hail from the region, it addresses key issues of political, economic and societal changes, the role of young people and of the international community. In addition, the book deals with the questions of both political and economic reform, and the intertwined nature of the two. Political reform that allows greater participation will fail to quell frustration if Arabs continue to feel that their job prospects are bleak. Similarly, Arabs will not accept economic reform that restores growth but continues to fence off the political sphere. This book offers a unique perspective on the uprisings by focusing on specific issue areas where change is needed, and offering a roadmap for the long road towards state building and new social contracts based on political inclusion, respect for pluralism, and sustained economic growth. As such, it will be a valuable resource for students and scholars of Middle East Politics, as well as those with an interest in the Arab Spring.

Download or read book Ergonomics and Health Aspects of Work with Computers written by Michelle M. Robertson and published by Springer. This book was released on 2011-06-27 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the International Conference on Ergonomics and Health Aspects of Work with Computers, EHAWC 2011, held within the framework of the 14th International Conference on Human-Computer Interaction, HCII 2011, incorporating 12 thematically similar conferences. A total of 4039 contributions was submitted to HCII 2011, of which 1318 papers were accepted for publication. The 25 papers presented in this volume were carefully reviewed and selected for inclusion in the book. They are organized in topical sections on quality of working life; health and well-being; and interactive devices and interfaces.

Download or read book New Paradigms in Ergonomics written by Neville A. Stanton and published by Routledge. This book was released on 2020-04-28 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The systems in which we work continue to evolve, creating emergent problems and often strengthening intractable issues. In order to remain relevant and impactful, the discipline of ergonomics needs its paradigms to evolve too. The aim of this book is to provide researchers and practitioners with new paradigms in the form of ideas, concepts, theories, methods, practices and values. The chapters take the reader on a journey through underlying theories, new ways to apply those theories and emerging domains in which ergonomics is expected to play a greater role. Readers of this book will be inspired by these new paradigms in ergonomics and seek to push the boundaries even further. The lifeblood of the science depends on continual evolvement and developments to take on the challenges we face in complex sociotechnical systems design and evaluation. Perhaps the most significant take-home message from this book is the demonstration of how theory maps onto practice. As such, the only remaining paradigm shift is for these ideas, concepts, methods and practices to be taken up more widely and the discipline advanced, until the next paradigm shift occurs. The chapters were originally published as a special issue in the journal Ergonomics.

Download or read book Digital Human Modeling Applications in Health Safety Ergonomics and Risk Management written by Vincent G. Duffy and published by Springer. This book was released on 2014-05-16 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 5th International Conference on Digital Human Modeling and Applications in Health, Safety, Ergonomics and Risk Management 2014, held as part of the 16th International Conference on Human-Computer Interaction, HCII 2014, held in Heraklion, Crete, Greece in June 2014, jointly with 13 other thematically conferences. The total of 1476 papers and 220 posters presented at the HCII 2014 conferences were carefully reviewed and selected from 4766 submissions. These papers address the latest research and development efforts and highlight the human aspects of design and use of computing systems. The papers accepted for presentation thoroughly cover the entire field of Human-Computer Interaction, addressing major advances in knowledge and effective use of computers in a variety of application areas. The 65 papers included in this volume are organized in topical sections on modeling posture and motion; anthropometry, design and ergonomics; ergonomics and human modeling in work and everyday life environments; advances in healthcare; rehabilitation applications; risk, safety and emergency.

Download or read book Far Eastern Economic Review written by and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ergonomics In Design written by Francisco Rebelo and Zihao Wang and published by AHFE International. This book was released on 2023-07-19 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 14th International Conference on Applied Human Factors and Ergonomics (AHFE 2023), July 20–24, 2023, San Francisco, USA

Download or read book International Reviews of Ergonomics written by David J. Oborne and published by Taylor & Francis Group. This book was released on 1987 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedia of Business ideas written by Mansoor Muallim and published by M M Info Care. This book was released on with total page 14745 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Content updated) Agri-Tools Manufacturing 1. Market Overview: The Agri-Tools Manufacturing industry is a vital part of the agriculture sector, providing essential equipment and machinery to support farming operations. Growth is driven by the increasing demand for advanced and efficient farming tools to meet the rising global food production requirements. 2. Market Segmentation: The Agri-Tools Manufacturing market can be segmented into several key categories: a. Hand Tools: • Basic manual tools used for tasks like planting, weeding, and harvesting. b. Farm Machinery: • Larger equipment such as tractors, Plows, and combines used for field cultivation and crop management. c. Irrigation Equipment: • Tools and systems for efficient water management and irrigation. d. Harvesting Tools: • Machinery and hand tools for crop harvesting and post-harvest processing. e. Precision Agriculture Tools: • High-tech equipment including GPS-guided machinery and drones for precision farming. f. Animal Husbandry Equipment: • Tools for livestock management and animal husbandry practices. 3. Regional Analysis: The adoption of Agri-Tools varies across regions: a. North America: • A mature market with a high demand for advanced machinery, particularly in the United States and Canada. b. Europe: • Growing interest in precision agriculture tools and sustainable farming practices. c. Asia-Pacific: • Rapidly expanding market, driven by the mechanization of farming in countries like China and India. d. Latin America: • Increasing adoption of farm machinery due to the region's large agricultural sector. e. Middle East & Africa: • Emerging market with potential for growth in agri-tools manufacturing. 4. Market Drivers: a. Increased Farming Efficiency: • The need for tools and machinery that can increase farm productivity and reduce labour costs. b. Population Growth: • The growing global population requires more efficient farming practices to meet food demands. c. Precision Agriculture: • The adoption of technology for data-driven decision-making in farming. d. Sustainable Agriculture: • Emphasis on tools that support sustainable and eco-friendly farming practices. 5. Market Challenges: a. High Initial Costs: • The expense of purchasing machinery and equipment can be a barrier for small-scale farmers. b. Technological Adoption: • Some farmers may be resistant to adopting new technology and machinery. c. Maintenance and Repairs: • Ensuring proper maintenance and timely repairs can be challenging. 6. Opportunities: a. Innovation: • Developing advanced and efficient tools using IoT, AI, and automation. b. Customization: • Offering tools tailored to specific crops and regional needs. c. Export Markets: • Exploring export opportunities to regions with growing agricultural sectors. 7. Future Outlook: The future of Agri-Tools Manufacturing looks promising, with continued growth expected as technology continues to advance and the need for efficient and sustainable agriculture practices increases. Innovations in machinery and equipment, along with the adoption of precision agriculture tools, will play a significant role in transforming the industry and addressing the challenges faced by the agriculture sector. Conclusion: Agri-Tools Manufacturing is a cornerstone of modern agriculture, providing farmers with the equipment and machinery they need to feed a growing global population. As the industry continues to evolve, there will be opportunities for innovation and collaboration to develop tools that are not only efficient but also environmentally friendly. Agri-tools manufacturers play a critical role in supporting sustainable and productive farming practices, making them essential contributors to the global food supply chain.

Download or read book Latinx Farmworkers in the Eastern United States written by Thomas A. Arcury and published by Springer Nature. This book was released on 2020-04-07 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Migrant and seasonal farmworkers are largely Latinx men, women, and children. They work in crop, dairy, and livestock production, and are essential to the U.S. agricultural economy—one of the most hazardous and least regulated industries in the United States. Latinx migrant and seasonal farmworkers in the eastern United States experience high rates of illness, injury, and death, indicating widespread occupational injustice. This second edition takes a social justice stance and integrates the past ten years of research and intervention to address health, safety, and justice issues for farmworkers. Contributors cover all major areas of health and safety research for migrant and seasonal farmworkers and their families, explore the factors that affect the health and safety of farmworkers and their families, and suggest approaches for further research and educational and policy intervention needed to improve the health and safety of Latinx farmworkers and their families. Among the chapter topics are: Occupational injury and illness in Latinx farmworkers in the eastern United States Mental health among Latinx farmworkers in the eastern United States The health of women farmworkers and women in farmworker families in the eastern United States The health of children in the Latinx farmworker community in the eastern United States Community-based participatory research with Latinx farmworker communities in the eastern United States Farm labor and the struggle for justice in the eastern United States Accessibly written and comprehensive in its scope, this second edition of Latinx Farmworkers in the Eastern United States: Health, Safety, and Justice will find an engaged audience among researchers, students, and practitioners in public health, occupational health, public policy, and social and behavioral sciences, as well as labor advocates and healthcare providers.

Download or read book Design Studies and Intelligence Engineering written by L.C. Jain and published by IOS Press. This book was released on 2022-03-30 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technologies applied in design studies vary from basic theories to more application-based systems, and intelligence engineering technologies – such as computer-aided industrial design, human factor design, and greenhouse design – play a significant role in design science. Intelligence engineering technologies encompass both theoretical and application perspectives, such as computational technologies, sensing technologies, and video detection. Intelligence engineering is multidisciplinary in nature, promoting cooperation, exchange and discussion between organizations and researchers from diverse fields. This book presents the proceedings of DSIE2021, the 2021 International Symposium on Design Studies and Intelligence Engineering, held in Hangzhou, China, on 27 & 28 November 2021. This annual conference invites renowned experts from around the world to speak on their specialist topics, providing a platform for many professionals and researchers from industry and academia to exchange and discuss recent advances in the field of design studies and intelligence engineering. The 210 submissions received were rigorously reviewed, and each of the 50 papers presented here was selected based on scores from three or four referees. Papers cover a very wide range of topics, from the design of a pneumatic soft finger with two joints, and the emotion of texture, to the design evaluation of a health management terminal for the elderly, and a multi-robot planning algorithm with quad tree map division for obstacles of irregular shape. Providing a varied overview of recent developments in design and intelligence engineering, this book will be of interest to researchers and all those working in the field.

Download or read book Ergonomics for the New Millennium Product and system design miscellaneous topics written by International Ergonomics Association. Congress and published by . This book was released on 2000 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt: