Download or read book Advances in Friction Stir Welding and Processing written by M.-K. Besharati-Givi and published by Elsevier. This book was released on 2014-12-08 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. - Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials - Considers heat generation, heat flow and material flow - Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP

Download or read book Advances in Welding Technologies for Process Development written by Jaykumar Vora and published by CRC Press. This book was released on 2019-02-22 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within manufacturing, welding is by far the most widely used fabrication method used for production, leading to a rise in research and development activities pertaining to the welding and joining of different, similar, and dissimilar combinations of the metals. This book addresses recent advances in various welding processes across the domain, including arc welding and solid-state welding process, as well as experimental processes. The content is structured to update readers about the working principle, predicaments in existing process, innovations to overcome these problems, and direct industrial and practical applications. Key Features: Describes recent developments in welding technology, engineering, and science Discusses advanced computational techniques for procedure development Reviews recent trends of implementing DOE and meta-heuristics optimization techniques for setting accurate parameters Addresses related theoretical, practical, and industrial aspects Includes all the aspects of welding, such as arc welding, solid state welding, and weld overlay

Download or read book Metals Abstracts written by and published by . This book was released on 1997 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hybrid Laser Arc Welding written by F O Olsen and published by Elsevier. This book was released on 2009-06-26 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid laser-arc welding (HLAW) is a combination of laser welding with arc welding that overcomes many of the shortfalls of both processes. This important book gives a comprehensive account of hybrid laser-arc welding technology and applications.The first part of the book reviews the characteristics of the process, including the properties of joints produced by hybrid laser-arc welding and ways of assessing weld quality. Part two discusses applications of the process to such metals as magnesium alloys, aluminium and steel as well as the use of hybrid laser-arc welding in such sectors as ship building and the automotive industry.With its distinguished editor and international team of contributors, Hybrid laser-arc welding is a valuable source of reference for all those using this important welding technology. - Reviews arc and laser welding including both advantages and disadvantages of the hybrid laser-arc approach - Explores the characteristics of the process including the properties of joints produced by hybrid laser-arc welding and ways of assessing weld quality - Examines applications of the process including magnesium alloys, aluminium and steel with specific focus on applications in the shipbuilding and automotive industries

Download or read book Friction Stir Welding and Processing written by Rajiv S. Mishra and published by ASM International. This book was released on 2007-01-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the rapidly growing area of friction stir welding. It also addresses the use of the technology for other types of materials processing, including superplastic forming, casting modification, and surface treatments. The book has been prepared to serve as the first general reference on friction stir technology,. Information is provided on tools, machines, process modeling, material flow, microstructural development and properties. Materials addressed include aluminum alloys, titanium alloys, steels, nickel-base alloys, and copper alloys. The chapters have been written by the leading experts in this field, representing leading industrial companies and university and government research insititutions.

Download or read book Advances in Micro and Nano Manufacturing and Surface Engineering written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-30 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.

Download or read book Friction Stir Welding written by Noor Zaman Khan and published by CRC Press. This book was released on 2017-07-28 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of mechanical properties and its characterization is important to the weld quality whose further analysis requires mechanical property and microstructure correlation. Present book addresses the basic understanding of the Friction Stir Welding (FSW) process that includes effect of various process parameters on the quality of welded joints. It discusses about various problems related to the welding of dissimilar aluminium alloys including influence of FSW process parameters on the microstructure and mechanical properties of such alloys. As a case study, effect of important process parameters on joint quality of dissimilar aluminium alloys is included.

Download or read book Proceedings of International Conference on Intelligent Manufacturing and Automation written by Hari Vasudevan and published by Springer Nature. This book was released on 2020-06-30 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers presented at the Second International Conference on Intelligent Manufacturing and Automation (ICIMA 2020), which was jointly organized by the Departments of Mechanical Engineering and Production Engineering at Dwarkadas J. Sanghvi College of Engineering (DJSCE), Mumbai, and by the Indian Society of Manufacturing Engineers (ISME). Covering a range of topics in intelligent manufacturing, automation, advanced materials and design, it focuses on the latest advances in e.g. CAD/CAM/CAE/CIM/FMS in manufacturing, artificial intelligence in manufacturing, IoT in manufacturing, product design & development, DFM/DFA/FMEA, MEMS & nanotechnology, rapid prototyping, computational techniques, nano- & micro-machining, sustainable manufacturing, industrial engineering, manufacturing process management, modelling & optimization techniques, CRM, MRP & ERP, green, lean & agile manufacturing, logistics & supply chain management, quality assurance & environmental protection, advanced material processing & characterization of composite & smart materials. The book is intended as a reference guide for future researchers, and as a valuable resource for students in graduate and doctoral programmes.

Download or read book Laser shock peening Performance and process simulation written by K. Ding and published by CRC Press. This book was released on 2006-01-24 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser shock peening (LSP) is a process for inducing compressive residual stresses using shock waves generated by laser pulses. It is a relatively new surface treatment for metallic materials that can greatly improve their resistance to crack initiation and propagation brought on by cyclic loading and fatigue. This book, the first of its kind, consolidates the scattered knowledge about LSP into one comprehensive volume. It describes the mechanisms of LSP and its substantial role in improving fatigue performance in terms of modification of microstructure, surface morphology, hardness, and strength. In particular, it describes numerical simulation techniques and procedures that can be adopted by engineers and research scientists to design, evaluate, and optimize LSP processes in practical applications.

Download or read book Handbook of Laser Welding Technologies written by S Katayama and published by Elsevier. This book was released on 2013-06-30 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser welding is a rapidly developing and versatile technology which has found increasing applications in industry and manufacturing. It allows the precision welding of small and hard-to-reach areas, and is particularly suitable for operation under computer or robotic control. The Handbook of laser welding technologies reviews the latest developments in the field and how they can be used across a variety of applications.Part one provides an introduction to the fundamentals of laser welding before moving on to explore developments in established technologies including CO2 laser welding, disk laser welding and laser micro welding technology. Part two highlights laser welding technologies for various materials including aluminium and titanium alloys, plastics and glass. Part three focuses on developments in emerging laser welding technologies with chapters on the applications of robotics in laser welding and developments in the modelling and simulation of laser and hybrid laser welding. Finally, part four explores the applications of laser welding in the automotive, railway and shipbuilding industries.The Handbook of laser welding technologies is a technical resource for researchers and engineers using laser welding technologies, professionals requiring an understanding of laser welding techniques and academics interested in the field. - Provides an introduction to the fundamentals of laser welding including characteristics, welding defects and evolution of laser welding - Discusses developments in a number of techniques including disk, conduction and laser micro welding - Focusses on technologies for particular materials such as light metal alloys, plastics and glass

Download or read book Joining of Titanium written by Robert Edward Monroe and published by . This book was released on 1967 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report supplies information on joining processes applicable to titanium and its alloys in sheet metal applications, primarily related directly to airframe construction. Although the material presented here does not cover all titanium joining processes, and omits such processes as plasma-arc, submerged-arc, electroslag, flash, and high-frequency resistance welding, the data presented cover materials up to 2-inches thick in some cases and the report should be useful to anyone seeking titanium joining information. The joining processes covered fall into five categories: welding, brazing, metallurgical bonding (diffusion and deformation bonding), adhesive bonding, and mechanical fastening. The fusion welding processes that are discussed in detail include gas tungsten arc, gas metal arc, arc spot, and electron beam. The resistance processes give extended coverage are spot, roll spot, and seam welding. (Author).

Download or read book Advances in Computational Methods in Manufacturing written by R. Ganesh Narayanan and published by Springer Nature. This book was released on 2019-10-17 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a selection of papers from the 2nd International Conference on Computational Methods in Manufacturing (ICCMM 2019). The papers cover the recent advances in computational methods for simulating various manufacturing processes like machining, laser welding, laser bending, strip rolling, surface characterization and measurement. Articles in this volume discuss both the development of new methods and the application and efficacy of existing computational methods in manufacturing sector. This volume will be of interest to researchers in both industry and academia working on computational methods in manufacturing.

Download or read book Applications of Robotics in Industry Using Advanced Mechanisms written by Janmenjoy Nayak and published by Springer Nature. This book was released on 2019-09-03 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shares important findings on the application of robotics in industry using advanced mechanisms, including software and hardware. It presents a collection of recent trends and research on various advanced computing paradigms such as soft computing, robotics, smart automation, power control, and uncertainty analysis. The book constitutes the proceedings of the 1st International Conference on Application of Robotics in Industry using Advanced Mechanisms (ARIAM2019), which offered a platform for sharing original research findings, presenting innovative ideas and applications, and comparing notes on various aspects of robotics. The contributions highlight the latest research and industrial applications of robotics, and discuss approaches to improving the smooth functioning of industries. Moreover, they focus on designing solutions for complex engineering problems and designing system components or processes to meet specific needs, with due considerations for public health and safety, including cultural, societal, and environmental considerations. Taken together, they offer a valuable resource for researchers, scientists, engineers, professionals and students alike.

Download or read book 3D Printing and Additive Manufacturing Technologies written by L. Jyothish Kumar and published by Springer. This book was released on 2018-06-07 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of papers on advanced technologies for 3D printing and additive manufacturing, and demonstrates how these technologies have changed the face of direct, digital technologies for the rapid production of models, prototypes and patterns. Because of their wide range of applications, 3D printing and additive manufacturing technologies have sparked a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across such diverse industries as consumer products, aerospace, medical devices and automotive engineering. This book will help designers, R&D personnel, and practicing engineers grasp the latest developments in the field of 3D Printing and Additive Manufacturing.

Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. - Includes coverage of the fundamentals of microstructural evolution in titanium alloys - Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) - Looks at the future of Titanium Additive Manufacturing - Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)

Download or read book Friction Stir Welding and Processing VI written by Rajiv S. Mishra and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction stir welding has seen significant growth in both technology implementation and scientific exploration. This book covers all aspects of friction stir welding and processing, from fundamentals to design and applications. It also includes an update on the current research issues in the field of friction stir welding and a guide for further research.

Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.