Download or read book Equipment Qualification in Operational Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1998 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is based on information presented at two IAEA Technical Committee meetings held within the framework of the IAEA Project on Operational Safety Guidance in 1993 and 1994. The document was prepared to provide guidance to Member States in assessing the status of equipment qualification (EQ) in operational nuclear power plants and in preserving this status. It offers methods and practices for activities which are necessary for a successful implementation of periodical safety reviews. The report should be of value for all countries that are parties to the Convention on Nuclear Safety, which entered into force on 24 October 1996 and stipulates the review and, where necessary, the upgrading of the safety of existing nuclear installations.
Download or read book Equipment Qualification for Nuclear Installations written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-12-09 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on a structured approach to the establishment and preservation of equipment qualification in nuclear installations, to confirm reliable performance of safety functions by such equipment during operational states and accident conditions, to avoid vulnerability due to common cause failure of the equipment. It applies primarily to equipment that performs one or more safety functions, but it may also be applied to items not important to safety, in accordance with national requirements. The qualification process covers electrical, instrumentation and control, and active mechanical equipment, and components associated with it, for example, seals, gaskets, lubricants, cables, connections, and mounting/anchoring structures. The qualification process for passive mechanical components for which the safety performance is assured by design in accordance with applicable codes, is outside the scope of this publication. The recommendations in this Safety Guide apply to new nuclear installations, and as far as is reasonably practicable to existing nuclear installations.
Download or read book A Guide to Qualification of Electrical Equipment for Nuclear Power Plants written by and published by . This book was released on 1983 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Qualification of Nuclear Power Plant Operations Personnel written by International Atomic Energy Agency and published by Bernan Press(PA). This book was released on 1984 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recruitment Qualification and Training of Personnel for Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2022-10-12 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide identifies the main objectives and responsibilities of the operating organization for the recruitment, qualification and training of personnel for new and existing nuclear power plants to establish and maintain a high level of competence of personnel and to ensure safe operation of the nuclear power plant. This publication can also be used as a guide for the recruitment, training and qualification of personnel for nuclear installations other than nuclear power plants.
Download or read book Recruitment Qualification and Training of Personnel for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2002 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on the recruitment, selection, qualification, training and authorization of personnel working in all safety related functions and at all levels of nuclear power plants. It supplements Safety Standards Series No. NS-R-2, Safety of Nuclear Power Plants: Operation (2000), and is related to Safety Standards Series No. NS-G-2.4, The Operating Organization for Nuclear Power Plants: Safety Guide. It supersedes Safety Series No. 50-SG-01 (Rev. 1), Staffing of Nuclear Power Plants and the Recruitment, Training and Authorization of Operating Personnel (1991).
Download or read book Instrumentation and Control Systems Important to Safety in Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2002 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recommends how the requirements established in Safety Standards Series No. NS-R-1, Safety of Nuclear Power Plants: Design, should be met for instrumentation and control systems important to safety.
Download or read book Use of Periodic Safety Review for Long Term Operation of Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-10-25 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: A periodic safety review is considered an effective way to obtain an overview of nuclear power plant safety. It is also used to determine reasonable and practicable modifications to maintain a high level of safety during continued operation, and to justify operation of a nuclear power plant beyond the original time frame. The review considers life limiting processes and features of structures, systems and components important to safety, and whether there are any foreseeable circumstances that could endanger the safe operation of the nuclear power plant. This publication addresses the scope of assessment, methods and applicable criteria within the periodic safety review and long term operation programmes framework, to support decision making for long term operation of nuclear power plants.
Download or read book Periodic Safety Review of Operational Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1994 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide supplements Safety Series No. 110: The Safety of Nuclear Installations, a safety fundamentals publication, and Safety Series No. 50-C-O (Rev. 1): Code on the Safety of Nuclear Power Plants: Operation. It primarily provides guidance on the conduct of a periodic safety review (PSR) of an operational nuclear power plant. A PSR is designed to take a comprehensive account of improvements in safety standards and operating practices, cumulative effects of plant ageing, modifications and feedback of operating experience, and developments in science and technology that have occurred over a ten year period. PSRs provide the means for determining necessary or worthwhile changes aimed at maintaining high levels of plant safety and harmonizing the safety of older plants with that of modern plants.
Download or read book Qualification of Active Mechanical Equipment Used in Nuclear Power Plants written by American Society of Mechanical Engineers and published by . This book was released on 1997 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Equipment Qualification for Nuclear Installations written by International Atomic Energy Agency and published by . This book was released on 2022-02-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This Safety Guide provides recommendations on a structured approach to the establishment and preservation of equipment qualification in nuclear installations, to confirm reliable performance of safety functions by such equipment during operational states and accident conditions, to avoid vulnerability due to common cause failure of the equipment. It applies primarily to equipment that performs one or more safety functions, but it may also be applied to items not important to safety, in accordance with national requirements. The qualification process covers electrical, instrumentation and control, and active mechanical equipment, and components associated with it, for example, seals, gaskets, lubricants, cables, connections, and mounting/anchoring structures. The qualification process for passive mechanical components for which the safety performance is assured by design in accordance with applicable codes, is outside the scope of this publication. The recommendations in this Safety Guide apply to new nuclear installations, and as far as is reasonably practicable to existing nuclear installations."--Publisher's description.
Download or read book Maintenance Testing Surveillance and Inspection in Nuclear Power Plants written by IAEA. and published by . This book was released on 2022 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Systems for Nuclear Power Plants written by Dr. Omar S. Mazzoni and published by John Wiley & Sons. This book was released on 2018-10-30 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all aspects of electrical systems for nuclear power plants written by an authority in the field Based on author Omar Mazzoni's notes for a graduate level course he taught in Electrical Engineering, this book discusses all aspects of electrical systems for nuclear power plants, making reference to IEEE nuclear standards and regulatory documents. It covers such important topics as the requirements for equipment qualification, acceptance testing, periodic surveillance, and operational issues. It also provides excellent guidance for students in understanding the basis of nuclear plant electrical systems, the industry standards that are applicable, and the Nuclear Regulatory Commission's rules for designing and operating nuclear plants. Electrical Systems for Nuclear Power Plants offers in-depth chapters covering: elements of a power system; special regulations and requirements; unique requirements of a Class 1E power system; nuclear plants containment electrical penetration assemblies; on-site emergency AC sources; on-site emergency DC sources; protective relaying; interface of the nuclear plant with the grid; station blackout (SBO) issues and regulations; review of electric power calculations; equipment aging and decommissioning; and electrical and control systems inspections. This valuable resource: Evaluates industry standards and their relationship to federal regulations Discusses Class 1E equipment, emergency generation, the single failure criterion, plant life, and plant inspection Includes exercise problems for each chapter Electrical Systems for Nuclear Power Plants is an ideal text for instructors and students in electrical power courses, as well as for engineers active in operating nuclear power plants.
Download or read book Manual on Quality Assurance for Installation and Commissioning of Instrumentation Control and Electrical Equipment in Nuclear Power Plants written by and published by . This book was released on 1989 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Operational Limits and Conditions and Operating Procedures for Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2022-09-15 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recommendations provided in this Safety Guide are aimed primarily at operating organizations of nuclear power plants and regulatory bodies. It covers the concept of operational limits and conditions (OLCs), their content as applicable to nuclear power plants, and the responsibilities of the operating organization for their establishment, modification, compliance and documentation. Operating procedures (including emergency operating procedures and severe accident management guidelines) to support the implementation of the OLCs and to ensure their observance are also within the scope of this Safety Guide.
Download or read book NRC Regulatory Guides written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1973 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of currently available electronic versions of NRC regulatory guides.
Download or read book Quality Assurance During Commissioning and Operation of Nuclear Power Plants written by International Atomic Energy Agency and published by Bernan Press(PA). This book was released on 1986 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
