Download or read book Machinery Condition Monitoring written by Amiya Ranjan Mohanty and published by CRC Press. This book was released on 2014-12-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Find the Fault in the Machines Drawing on the author’s more than two decades of experience with machinery condition monitoring and consulting for industries in India and abroad, Machinery Condition Monitoring: Principles and Practices introduces the practicing engineer to the techniques used to effectively detect and diagnose faults in machines. Providing the working principle behind the instruments, the important elements of machines as well as the technique to understand their conditions, this text presents every available method of machine fault detection occurring in machines in general, and rotating machines in particular. A Single-Source Solution for Practice Machinery Conditioning Monitoring Since vibration is one of the most widely used fault detection techniques, the book offers an assessment of vibration analysis and rotor-dynamics. It also covers the techniques of wear and debris analysis, and motor current signature analysis to detect faults in rotating mechanical systems as well as thermography, the nondestructive test NDT techniques (ultrasonics and radiography), and additional methods. The author includes relevant case studies from his own experience spanning over the past 20 years, and detailing practical fault diagnosis exercises involving various industries ranging from steel and cement plants to gas turbine driven frigates. While mathematics is kept to a minimum, he also provides worked examples and MATLAB® codes. This book contains 15 chapters and provides topical information that includes: A brief overview of the maintenance techniques Fundamentals of machinery vibration and rotor dynamics Basics of signal processing and instrumentation, which are essential for monitoring the health of machines Requirements of vibration monitoring and noise monitoring Electrical machinery faults Thermography for condition monitoring Techniques of wear debris analysis and some of the nondestructive test (NDT) techniques for condition monitoring like ultrasonics and radiography Machine tool condition monitoring Engineering failure analysis Several case studies, mostly on failure analysis, from the author’s consulting experience Machinery Condition Monitoring: Principles and Practices presents the latest techniques in fault diagnosis and prognosis, provides many real-life practical examples, and empowers you to diagnose the faults in machines all on your own.

Download or read book Equipment Conditioning Monitoring and Techniques written by Alexander Arnfinn Olsen and published by Springer Nature. This book was released on with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Condition Monitoring written by A. Davies and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's competitive climate the economies of production have become a critical factor for all manufacturing companies. For this reason, achieving cost-effective plant maintenance is highly important. In this context monitoring plays a vital role. The purpose of this book is to inform readers about techniques currently available in the field of condition monitoring, and the methodology used in their application. With contributions from experts throughout the world, the Handbook of Condition Monitoring addresses the four major technique areas in condition monitoring in addition to the latest developments in condition monitoring research. Significantly, the Handbook of Condition Monitoring includes the following features: comprehensive coverage of the full range of techniques and methodologies accepted knowledge and new developments both technical and managerial content. This is the essential reference book for maintenance technicians, engineers, managers and researchers as well as graduate students involved in manufacturing and mechanical engineering, and condition monitoring.

Download or read book Condition Monitoring with Vibration Signals written by Hosameldin Ahmed and published by John Wiley & Sons. This book was released on 2020-01-07 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an extensive, up-to-date treatment of techniques used for machine condition monitoring Clear and concise throughout, this accessible book is the first to be wholly devoted to the field of condition monitoring for rotating machines using vibration signals. It covers various feature extraction, feature selection, and classification methods as well as their applications to machine vibration datasets. It also presents new methods including machine learning and compressive sampling, which help to improve safety, reliability, and performance. Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines starts by introducing readers to Vibration Analysis Techniques and Machine Condition Monitoring (MCM). It then offers readers sections covering: Rotating Machine Condition Monitoring using Learning Algorithms; Classification Algorithms; and New Fault Diagnosis Frameworks designed for MCM. Readers will learn signal processing in the time-frequency domain, methods for linear subspace learning, and the basic principles of the learning method Artificial Neural Network (ANN). They will also discover recent trends of deep learning in the field of machine condition monitoring, new feature learning frameworks based on compressive sampling, subspace learning techniques for machine condition monitoring, and much more. Covers the fundamental as well as the state-of-the-art approaches to machine condition monitoringguiding readers from the basics of rotating machines to the generation of knowledge using vibration signals Provides new methods, including machine learning and compressive sampling, which offer significant improvements in accuracy with reduced computational costs Features learning algorithms that can be used for fault diagnosis and prognosis Includes previously and recently developed dimensionality reduction techniques and classification algorithms Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines is an excellent book for research students, postgraduate students, industrial practitioners, and researchers.

Download or read book Handbook of Condition Monitoring written by B. K. N. Rao and published by Elsevier. This book was released on 1996 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The need to reduce costs has generated a greater interest in condition monitoring in recent years. The Handbook of Condition Monitoring gives an extensive description of available products and their usage making it a source of practical guidance supported by basic theory.This handbook has been designed to assist individuals within companies in the methods and devices used to monitor the condition of machinery and products.

Download or read book Condition Monitoring and Control for Intelligent Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition modelling and control is a technique used to enable decision-making in manufacturing processes of interest to researchers and practising engineering. Condition Monitoring and Control for Intelligent Manufacturing will be bought by researchers and graduate students in manufacturing and control and engineering, as well as practising engineers in industries such as automotive and packaging manufacturing.

Download or read book Condition Monitoring Using Computational Intelligence Methods written by Tshilidzi Marwala and published by Springer Science & Business Media. This book was released on 2012-01-25 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition Monitoring Using Computational Intelligence Methods promotes the various approaches gathered under the umbrella of computational intelligence to show how condition monitoring can be used to avoid equipment failures and lengthen its useful life, minimize downtime and reduce maintenance costs. The text introduces various signal-processing and pre-processing techniques, wavelets and principal component analysis, for example, together with their uses in condition monitoring and details the development of effective feature extraction techniques classified into frequency-, time-frequency- and time-domain analysis. Data generated by these techniques can then be used for condition classification employing tools such as: • fuzzy systems; rough and neuro-rough sets; neural and Bayesian networks;hidden Markov and Gaussian mixture models; and support vector machines.

Download or read book Engineering Condition Monitoring written by Ron Barron and published by Prentice Hall. This book was released on 1996 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance can account for an extremely large proportion of the operating costs of machinery. Additionally, the downtime caused by machine breakdowns can severely affect the productivity of factories or the safety of products. Thus, it is becoming increasingly important for companies to consider the monitoring of their equipment 'in situ' in order to reduce the number of breakdowns experienced and to avoid the unnecessary cost and delay caused by repairs. Engineering Condition Monitoring provides an overview of all aspects of this important technique paying special attention to the vibration analysis of rotating machines. The text will be suitable for industrial practitioners and managers along with postgraduate students involved in mechanical and manufacturing engineering. The authors have used their vast collective experience both in industry and as academic teachers to produce a broad, descriptive text, concentrating on practical aspects, that will be invaluable to anyone involved in the operation or sub-contracting of condition monitoring methods.

Download or read book Mechanical Vibrations and Condition Monitoring written by Juan Carlos A. Jauregui Correa and published by Academic Press. This book was released on 2020-03-18 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibrations and Condition Monitoring presents a collection of data and insights on the study of mechanical vibrations for the predictive maintenance of machinery. Seven chapters cover the foundations of mechanical vibrations, spectrum analysis, instruments, causes and effects of vibration, alignment and balancing methods, practical cases, and guidelines for the implementation of a predictive maintenance program. Readers will be able to use the book to make predictive maintenance decisions based on vibration analysis. This title will be useful to senior engineers and technicians looking for practical solutions to predictive maintenance problems. However, the book will also be useful to technicians looking to ground maintenance observations and decisions in the vibratory behavior of machine components. Presents data and insights into mechanical vibrations in condition monitoring and the predictive maintenance of industrial machinery Defines the key concepts related to mechanical vibration and its application for predicting mechanical failure Describes the dynamic behavior of most important mechanical components found in industrial machinery Explains fundamental concepts such as signal analysis and the Fourier transform necessary to understand mechanical vibration Provides analysis of most sources of failure in mechanical systems, affording an introduction to more complex signal analysis

Download or read book Equipment Condition Monitoring Techniques written by American Bureau of Shipping and published by . This book was released on 2016 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Predictive Maintenance of Pumps Using Condition Monitoring written by Raymond S Beebe and published by Elsevier. This book was released on 2004-04-16 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how condition monitoring can be applied to detect internal degradation in pumps so that appropriate maintenance can be decided upon based on actual condition rather than arbitrary time scales. The book focuses on the main condition monitoring techniques particularly relevant to pumps (vibration analysis, performance analysis). The philosophy of condition monitoring is briefly summarised and field examples show how condition monitoring is applied to detect internal degration in pumps.* The first book devoted to condition monitoring and predictive maintenance in pumps. * Explains how to minimise energy costs, limit overhauls and reduce maintenance expenditure.* Includes material not found anywhere else.

Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2011-03-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.

Download or read book Proactive Condition Monitoring of Low Speed Machines written by Zhaklina Stamboliska and published by Springer. This book was released on 2014-11-15 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book broadens readers’ understanding of proactive condition monitoring of low- speed machines in heavy industries. It focuses on why low-speed machines are different than others and how maintenance of these machines should be implemented with particular attention. The authors explain the best available monitoring techniques for various equipment and the principle of how to get proactive information from each technique. They further put forward possible strategies for application of FEM for detection of faults and technical assessment of machinery. Implementation phases are described and industrial case studies of proactive condition monitoring are included. Proactive Condition Monitoring of Low-Speed Machines is an essential resource for engineers and technical managers across a range of industries as well as design engineers working in industrial product development.

Download or read book Industrial Approaches in Vibration Based Condition Monitoring written by Jyoti Kumar Sinha and published by CRC Press. This book was released on 2020-01-21 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration-based condition monitoring (VCM) is a well-accepted approach in industries for early detection of any defect, thereby triggering the maintenance process and ultimately reducing overheads and plant downtime. A number of vibration instruments, data analyzer and related hardware and software codes are developed to meet the industry requirements. This book aims to address issues faced by VCM professionals, such as frequency range estimation for vibration measurements, sensors, data collection and data analyzer including related parameters which are explained through step-by-step approaches. Each chapter is written in the tutorial style with experimental and/or industrial examples for clear understanding.

Download or read book Condition Monitoring of Electrical Machines written by Peter J. Tavner and published by Taylor & Francis Group. This book was released on 1987 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only guide available on the techniques of monitoring the condition of electrical machinery on-line. Text explains the fundamentals of construction for rotating electrical machines, describes modes of failure for them, and gives comprehensive coverage of the methods that can be employed to detect incipient faults. Chapters cover current monitoring techniques--electrical, chemical, mechanical, and thermal--and also offer discussion of some of the new developments now being introduced. One section is devoted to case studies, including the monitoring of turbogenerators, large drives in the oil industry, and high integrity machines operating in a power station. Contains over 100 illustrations, 20 tables, and extensive references.

Download or read book Recent Trends in the Condition Monitoring of Transformers written by Sivaji Chakravorti and published by Springer Science & Business Media. This book was released on 2013-10-21 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Trends in the Condition Monitoring of Transformers reflects the current interest in replacing traditional techniques used in power transformer condition monitoring with non-invasive measures such as polarization/depolarization current measurement, recovery voltage measurement, frequency domain spectroscopy and frequency response analysis. The book stresses the importance of scrutinizing the condition of transformer insulation which may fail under present day conditions of intensive use with the resulting degradation of dielectric properties causing functional failure of the transformer. The text shows the reader how to overcome the key challenges facing today’s maintenance policies, namely: The selection of appropriate techniques for dealing with each type of failure process accounting for the needs of plant owners, plant users and wider society; and Cost-efficiency and durability of effect. Many of the failure-management methods presented rely on the fact that most failures give warning when they are imminent. These potential failures give rise to identifiable physical conditions and the novel approaches described detect them so that action can be taken to avoid degeneration into full-blown functional failure. This “on-condition” maintenance means that equipment can be left in service as long as a specified set of performance standards continue to be met, avoiding the costly downtime imposed by routine and perhaps unnecessary maintenance but without risking equally expensive failure. Recent Trends in the Condition Monitoring of Transformers will be of considerable interest to both academic researchers in power systems and to engineers working in the power generation and distribution industry showing how new and more efficient methods of fault diagnosis and condition management can increase transformer efficiency and cut costs.

Download or read book Electric Machines written by Hamid A. Toliyat and published by CRC Press. This book was released on 2017-12-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: With countless electric motors being used in daily life, in everything from transportation and medical treatment to military operation and communication, unexpected failures can lead to the loss of valuable human life or a costly standstill in industry. To prevent this, it is important to precisely detect or continuously monitor the working condition of a motor. Electric Machines: Modeling, Condition Monitoring, and Fault Diagnosis reviews diagnosis technologies and provides an application guide for readers who want to research, develop, and implement a more effective fault diagnosis and condition monitoring scheme—thus improving safety and reliability in electric motor operation. It also supplies a solid foundation in the fundamentals of fault cause and effect. Combines Theoretical Analysis and Practical Application Written by experts in electrical engineering, the book approaches the fault diagnosis of electrical motors through the process of theoretical analysis and practical application. It begins by explaining how to analyze the fundamentals of machine failure using the winding functions method, the magnetic equivalent circuit method, and finite element analysis. It then examines how to implement fault diagnosis using techniques such as the motor current signature analysis (MCSA) method, frequency domain method, model-based techniques, and a pattern recognition scheme. Emphasizing the MCSA implementation method, the authors discuss robust signal processing techniques and the implementation of reference-frame-theory-based fault diagnosis for hybrid vehicles. Fault Modeling, Diagnosis, and Implementation in One Volume Based on years of research and development at the Electrical Machines & Power Electronics (EMPE) Laboratory at Texas A&M University, this book describes practical analysis and implementation strategies that readers can use in their work. It brings together, in one volume, the fundamentals of motor fault conditions, advanced fault modeling theory, fault diagnosis techniques, and low-cost DSP-based fault diagnosis implementation strategies.