Download or read book Epoxy Resin Technology Developments Since 1979 written by J. I. DiStasio and published by William Andrew. This book was released on 1982 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Epoxy Resin Technology written by and published by . This book was released on 1982 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Reinforced Plastics 4 written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most interesting developments in composite materials technology during the past decade has been the attempt to displace thermosetting resins from their position as the natural matrix in 'advanced' composites for sUl;h fields as aerospace. Dr McMahon gives some indication of the nature of this challenge in his chapter on fibre-reinforced thermoplastics. He acknowledges the problem of their low fibre contents, with the associated possibility of inadequate mechanical properties, especially in compression; and draws attention to the way in which the lack of suitable teSI methods for composites in compression has caused difficulties in assessing the latest thermoplastics composites in this respect. It is therefore of special interest that Professor Piggott deals with the whole question of compression tesllflg of composites in Chapter 4. On the positive side, reinforced thermoplastics seem to be much more damage-tolerant than thermosets. This is clearly an advantage that will not be lost on the aircraft industry. The subject of damage repair to FRP is one of substantial concern; the wider question of defect detection and assessment is discussed authoritatively by Reifsnider and Henneke in Chapter 3, which focuses on the technique of thermography.
Download or read book Epoxy Resins written by Clayton May and published by Routledge. This book was released on 2018-05-11 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring new techniques of physicochemical analysis and broader coverage of textile applications,the thoroughly rewritten and enlarged Second Edition provides hands-on assistance inthe use, formulation, synthesis, processing, and handling of epoxy resins.Epoxy Resins, Second Edition, Revised and Expanded documents available commercialproducts, including rarer species of epoxides ... shows how to achieve qualityassurance through analytical methods ... discusses toxicity, hazards, and safe handling ...looks closely at elastomer modification of resins as well as adhesives, coatings, electrical andelectronic applications, fiber-reinforced composites, and the use of epoxy resins in thestabilization of polymers, plasticizers, and textiles ... and assists in the more efficientselection and application of epoxy resins.Complete with nearly 300 pages of tables for quick references, plus over 300 diagrams andphotographs, and more than 4,400 bibliographic references, this volume will proveindispensable to polymer, physical, and organic chemists, rheologists, materials scientists andengineers, and chemical, plastics, aerospace, automotive, and electrical and electronicsengineers.
Download or read book Recent Developments in Epoxy Resins written by Ian Hamerton and published by iSmithers Rapra Publishing. This book was released on 1996 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author reviews the synthesis, manufacture and characterisation of epoxy monomers, cure reactions of epoxy resins, spectroscopic and analytical methods of studying cure, techniques for the modelling of cure, the use of additives and modifiers, and technologically driven advances in applications. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Chemistry and Technology of Epoxy Resins written by Bryan Ellis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Epoxy resins have been commercially available for about 45 years and now have many major industrial applications, especially where technical advantages warrant their somewhat higher costs. The chemistry of these resins is fascinating and has attracted study by many very able scientists. The technological applications of the epoxy resins are very demanding and there are many new developments each year. The aims of the present book are to present in a compact form both theoretical and practical information that will assist in the study, research and innovations in the field of epoxy resin science and technology. The literature on epoxy resins is so vast that it is not possible to be encyclopaedic and that is not the function of the present text. It is the editor's hope that the selection of topics discussed will provide an up-to-date survey. There is some overlap in the chapters but this is minimal and so each chapter is essentially self contained. As with all chemicals there are toxicological and other hazards. These are not dealt with in this text since a little knowledge can be dangerous, but material supplied can provide information regarding any safety precautions that may be necessary. However, often these precautions are not onerous and epoxy resins, or more specifically the hardeners, can be handled readily. It is hoped that this text will provide an up-to-date outline of the science and technology of epoxy resins and stimulate further research into unsolved problems and assist further technological developments.
Download or read book Plastics for Electronics written by M. Goosey and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric materials are widely used during nearly all stages of the manufacturing process of electronics products and this book is intended to give an introductory overview of the chemistry, properties and uses of some of the more important classes of materials likely to be encountered in these applications. It is intended to serve primarily as an introduction to the use of polymers and plastics in the processing and manufacture of electronic and electrical components and assemblies. With no in-depth knowledge of polymers assumed, the book is ideal for engineers and researchers working in areas where electronics and polymer technology overlap. There are also numerous references for those wishing to delve deeper. The first edition of this book was published in 1985 and since then there has been an unbelievable change and growth in the electronics industry. Much of this has been made possible by the continued development of new and improved polymeric materials. In some areas the polymers used have changed markedly whereas in others there have been continued improvements to the same basic materials. Consequently, this second edition includes new chapters detailing the materials which have emerged more recently. Chapters covering the same topics as the original version have been extensively rewritten and updated, often with the assistance of current international experts. In the last few years much work has been carried out on the development and use of special polymers that have important properties in addition to those normally associated with conventional polymers. This edition therefore includes a chapter that introduces one particular group of materials exhibiting these special properties, the ferroelectric polymers. The book also includes new chapters on high temperature thermoplastics, or engineering plastics as they are sometimes known, and their use in so-called moulded interconnect devices, where the polymer is used to provide a much wider range of functions than has been possible using a more conventional approach. This new edition also has a wider international coverage with chapters by experts based in Belgium, Holland, Switzerland, Germany, England and the United States of America.
Download or read book Structural Adhesives written by S.R. Hartshorn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesives in general and structural adhesives in particular are the subjects of much academic interest as well as commercial importance. Structural bonding, as a method of joining, offers a number of advantages over mechanical fastening. However, in order to achieve satisfactory results, the proper adhesive must be selected and the appropriate bonding procedures followed. The purpose of Structural Adhesives: Chemistry and Technology is to review the major classes of structural adhesives and the principles of adhesion and bonding as these relate to structural joints. Each chapter provides an overview of the topic under discussion with a list of references to the relevant literature. In addition to describing the chemistry involved, other aspects of structural adhesive technology are covered, such as formula tion, testing, and end uses. Some structural adhesives, especially epoxies and phenolics, have a long history of successful use and are now widely employed. Others, such as the structural acrylics and cyanoacrylates, are beginning to gain industrial acceptance. Urethanes and anaerobics have limited but important uses, while high-temperature adhesives are still largely in the research and development stage.
Download or read book Handbook of Thermoset Plastics written by Hanna Dodiuk and published by William Andrew. This book was released on 2021-10-25 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoset Plastics, Fourth Edition provides complete coverage of the chemical processes, manufacturing techniques and design properties of each polymer, along with its applications. This new edition has been expanded to include the latest developments in the field, with new chapters on radiation curing, biological adhesives, vitrimers, and 3D printing. This detailed handbook considers the practical implications of using thermoset plastics and the relationships between processing, properties and applications, as well as analyzing the strengths and weakness of different methods and applications.The aim of the book is to help the reader to make the right decision and take the correct action on the basis of informed analysis – avoiding the pitfalls the authors' experience has uncovered. In industry, the book supports engineers, scientists, manufacturers and R&D professionals working with plastics. The information included will also be of interest to researchers and advanced students in plastics engineering, polymer chemistry, adhesives and coatings. - Offers a systematic approach, guiding the reader through chemistry, processing methods, properties and applications of thermosetting polymers - Includes thorough updates that discuss current practice and the new developments on biopolymers, nanotechnology, 3D printing, radiation curing and biological adhesives - Uses case studies to demonstrate how particular properties make different polymers suitable for different applications - Covers end-use and safety considerations
Download or read book Principles of Polymer Systems Sixth Edition written by Ferdinand Rodriguez and published by CRC Press. This book was released on 2014-12-09 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining a balance between depth and breadth, the Sixth Edition of Principles of Polymer Systems continues to present an integrated approach to polymer science and engineering. A classic text in the field, the new edition offers a comprehensive exploration of polymers at a level geared toward upper-level undergraduates and beginning graduate students. Revisions to the sixth edition include: A more detailed discussion of crystallization kinetics, strain-induced crystallization, block copolymers, liquid crystal polymers, and gels New, powerful radical polymerization methods Additional polymerization process flow sheets and discussion of the polymerization of polystyrene and poly(vinyl chloride) New discussions on the elongational viscosity of polymers and coarse-grained bead-spring molecular and tube models Updated information on models and experimental results of rubber elasticity Expanded sections on fracture of glassy and semicrystalline polymers New sections on fracture of elastomers, diffusion in polymers, and membrane formation New coverage of polymers from renewable resources New section on X-ray methods and dielectric relaxation All chapters have been updated and out-of-date material removed. The text contains more theoretical background for some of the fundamental concepts pertaining to polymer structure and behavior, while also providing an up-to-date discussion of the latest developments in polymerization systems. Example problems in the text help students through step-by-step solutions and nearly 300 end-of-chapter problems, many new to this edition, reinforce the concepts presented.
Download or read book Chemistry and Technology of Epoxy Resins written by Bryan Ellis and published by Springer. This book was released on 2011-09-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Epoxy resins have been commercially available for about 45 years and now have many major industrial applications, especially where technical advantages warrant their somewhat higher costs. The chemistry of these resins is fascinating and has attracted study by many very able scientists. The technological applications of the epoxy resins are very demanding and there are many new developments each year. The aims of the present book are to present in a compact form both theoretical and practical information that will assist in the study, research and innovations in the field of epoxy resin science and technology. The literature on epoxy resins is so vast that it is not possible to be encyclopaedic and that is not the function of the present text. It is the editor's hope that the selection of topics discussed will provide an up-to-date survey. There is some overlap in the chapters but this is minimal and so each chapter is essentially self contained. As with all chemicals there are toxicological and other hazards. These are not dealt with in this text since a little knowledge can be dangerous, but material supplied can provide information regarding any safety precautions that may be necessary. However, often these precautions are not onerous and epoxy resins, or more specifically the hardeners, can be handled readily. It is hoped that this text will provide an up-to-date outline of the science and technology of epoxy resins and stimulate further research into unsolved problems and assist further technological developments.
Download or read book Handbook of Thermoset Plastics written by Andreas Kandelbauer and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated polyester resins (UPR) and vinyl ester resins (VER) are among the most commercially important thermosetting matrix materials for composites. Although comparatively low cost, their technological performance is suitable for a wide range of applications, such as fiber-reinforced plastics, artificial marble or onyx, polymer concrete, or gel coats. The main areas of UPR consumption include the wind energy, marine, pipe and tank, transportation, and construction industries. This chapter discusses basic UPR and VER chemistry and technology of manufacturing, and consequent applications. Some important properties and performance characteristics are discussed, such as shrinkage behavior, flame retardance, and property modification by nanoparticles. Also briefly introduced and described are the practical aspects of UPR and VER processing, with special emphasis on the most widely used technological approaches, such as hand and spray layup, resin infusion, resin transfer molding, sheet and bulk molding, pultrusion, winding, and centrifugal casting.
Download or read book Adhesives Technology written by Marcia Halpern Gutcho and published by William Andrew. This book was released on 1983 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Epoxy Resins written by Clayton May and published by Routledge. This book was released on 2018-05-11 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring new techniques of physicochemical analysis and broader coverage of textile applications,the thoroughly rewritten and enlarged Second Edition provides hands-on assistance inthe use, formulation, synthesis, processing, and handling of epoxy resins.Epoxy Resins, Second Edition, Revised and Expanded documents available commercialproducts, including rarer species of epoxides ... shows how to achieve qualityassurance through analytical methods ... discusses toxicity, hazards, and safe handling ...looks closely at elastomer modification of resins as well as adhesives, coatings, electrical andelectronic applications, fiber-reinforced composites, and the use of epoxy resins in thestabilization of polymers, plasticizers, and textiles ... and assists in the more efficientselection and application of epoxy resins.Complete with nearly 300 pages of tables for quick references, plus over 300 diagrams andphotographs, and more than 4,400 bibliographic references, this volume will proveindispensable to polymer, physical, and organic chemists, rheologists, materials scientists andengineers, and chemical, plastics, aerospace, automotive, and electrical and electronicsengineers.
Download or read book Developments in Reinforced Plastics written by and published by . This book was released on 1980 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1980 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1984 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
