Download or read book Environmentally Friendly Machining written by U.S. Dixit and published by Springer Science & Business Media. This book was released on 2012-01-10 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environment-Friendly Machining provides an in-depth overview of environmentally-friendly machining processes, covering numerous different types of machining in order to identify which practice is the most environmentally sustainable. The book discusses three systems at length: machining with minimal cutting fluid, air-cooled machining and dry machining. Also covered is a way to conserve energy during machining processes, along with useful data and detailed descriptions for developing and utilizing the most efficient modern machining tools. Researchers and engineers looking for sustainable machining solutions will find Environment-Friendly Machining to be a useful volume.

Download or read book Environmentally Friendly Machining written by and published by . This book was released on 2012-01-21 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainable Machining written by J. Paulo Davim and published by Springer. This book was released on 2017-03-19 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

Download or read book Green Manufacturing Processes and Systems written by Paulo Davim J and published by Springer Science & Business Media. This book was released on 2012-10-30 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the recent advances on green manufacturing processes and systems for modern industry. Chapter 1 provides information on sustainable manufacturing through environmentally-friendly machining. Chapter 2 is dedicated to environmentally-friendly machining: vegetable based cutting fluids. Chapter 3 describes environmental-friendly joining of tubes. Chapter 4 contains information on concepts, methods and strategies for zero-waste in manufacturing. Finally, chapter 5 is dedicated to the application of hybrid MCDM approach for selecting the best tyre recycling process. This book serves as a research book for students at final undergraduate engineering course or at postgraduate level. It is a reference for professionals in industries related to manufacturing and new green jobs (green products, renewable energy, green services and environmental conservation).

Download or read book Advances in Sustainable Machining and Manufacturing Processes written by Kishor Kumar Gajrani and published by CRC Press. This book was released on 2022-05-18 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an in-depth overview of sustainability in machining processes, challenges during machining of difficult-to-cut materials and different ways of green machining in achieving sustainability. It discusses important topics including green and sustainable machining, dry machining, textured cutting coated tools for machining, solid lubricants-based machining, gas-cooled machining, cryogenic cooling for intelligent machining, artificial neural network for machining, big data based machining, and hybrid intelligent machining. This book- Covers advances in sustainable machining such as gas-cooled machining, near dry machining, and minimum quantity lubrication. Explores use of big data, machine learning and artificial intelligence for machining processes. Provides case studies and experimental design as well as results with analysis focusing on achieving sustainability. Discusses artificial intelligence and machine learning based machining processes. Cover the latest applications of sustainable manufacturing for a better understanding of the concepts. The text is primarily written for senior undergraduate, graduate students, and researchers in the fields of mechanical, manufacturing, industrial, production engineering and materials science.

Download or read book Sustainable Machining and Green Manufacturing written by S. Thirumalai Kumaran and published by John Wiley & Sons. This book was released on 2024-03-12 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to be a source for understanding sustainable machining and green manufacturing. The goal is to gain new ideas and encourage readers to utilize fewer natural resources to reduce pollution. Some examples include cutting material needs, recycling and reusing materials, and promoting environmentally-friendly practices such as dry machining and eco-friendly cutting fluids. By reducing pollution and waste, more environmentally-friendly practices will help encourage a more environmentally conscious future. Ideas evaluated in this book The investigating of synergy between natural fibers and epoxy composites that enhance mechanical properties Explores the potential of sustainable reinforcements in polymer composites Uncovers the critical role of manufacturing methods in determining the mechanical prowess of biofiber-reinforced composites Details the importance of environmentally friendly conscious manufacturing processes Discusses topics on precision machining, additive manufacturing, and optimizing manufacturing processes

Download or read book Manufacturing Systems and Technologies for the New Frontier written by Fumihiko Kimura and published by Springer Science & Business Media. This book was released on 2008-05-19 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collected here are 112 papers concerned with new directions in manufacturing systems, given at the 41st CIRP Conference on Manufacturing Systems. The high-quality material includes reports of work from both scientific and engineering standpoints.

Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.

Download or read book Machining Difficult to Cut Materials written by Hossam A. Kishawy and published by Springer. This book was released on 2018-08-09 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focus on the challenges faced by cutting materials with superior mechanical and chemical characteristics, such as hardened steels, titanium alloys, super alloys, ceramics and metal matrix composites. Aspects such as costs and appropriate machining strategy are mentioned. The authors present the characteristics of the materials difficult to cut and comment on appropriate cutting tools for their machining. This book also serves as a reference tool for manufacturers working in industry.

Download or read book Environmentally Benign Machining written by Şenol Bayraktar and published by CRC Press. This book was released on 2024-09-05 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential information on environmentally benign/sustainable machining processes including innovations and developments in conventional machining, considering economy, safety, and productivity. Developments in machine tools, recent research on green lubricants and lubrication techniques, process hybridization, and the role of optimization techniques are discussed. Green machining of difficult-to-machine materials and composites is also explained with attempts towards making electric discharge and electrochemical machining technologies. Features: Covers up to date and latest information on environmentally benign machining technologies. Includes current approaches regarding the machinability properties of biomaterials, smart materials, and difficult-to-cut materials. Reviews theoretical understanding and practical aspects of using different technological approaches to attain sustainability in machining. Includes sustainability aspects for both conventional and modern machining. Aids industrial users in the optimum selection of machining parameters with regard to sustainability. This book is aimed at researchers and professionals in manufacturing and mechanical engineering, and sustainable processes.

Download or read book Sustainable Manufacturing written by Kapil Gupta and published by Elsevier. This book was released on 2021-03-30 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Manufacturing examines the overall sustainability of a wide range of manufacturing processes and industrial systems. With chapters addressing machining, casting, additive and gear manufacturing processes; and hot topics such as remanufacturing, life cycle engineering, and recycling, this book is the most complete guide to this topic available. Drawing on experts in both academia and industry, coverage addresses theoretical developments and practical improvements from research and innovations. This unique book will advise readers on how to achieve sustainable manufacturing processes and systems, and further the clean and safe environment. This handbook is a part of the four volume set entitled Handbooks in Advanced Manufacturing. The other three address Advanced Machining and Finishing, Advanced Welding and Deforming, and Additive Manufacturing. - Provides basic to advanced level information on various aspects of sustainable manufacturing - Presents the strategies and techniques to achieve sustainability in numerous areas of manufacturing and industrial engineering such as environmentally benign machining, sustainable additive manufacturing, remanufacturing and recycling, sustainable supply chain, and life cycle engineering - Combines contributions from experts in academia and industry with the latest research and case studies - Explains how to attain a clean, green, and safe environment via sustainable manufacturing - Presents recent developments and suggests future research directions

Download or read book Metalworking Fluids MWFs for Cutting and Grinding written by V P Astakhov and published by Elsevier. This book was released on 2012-01-31 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal working fluids (MWFs) provide important functions such as lubrication and cooling in the machining of metals. This book reviews the issues surrounding the use of fluids for cutting and grinding throughout the metal working process, from selection and testing to disposal.The book opens with chapters considering the mechanism and action, selection and delivery of MWFs to the machining zone before moving onto discuss the many issues surrounding MWFs during machining such as selection of the proper MWF, environmental concerns, supply methods, circulation and monitoring. The final chapters discuss the maintenance, replacement and disposal of MWFs.With its distinguished editors and international team of expert contributors, Metalworking fluids (MWFs) for cutting and grinding is an invaluable reference tool for engineers and organizations using metal cutting/machining in the manufacturing process as well as machine designers/manufacturers and machining fluid/chemical suppliers. - Chapters consider the mechanism and action, selection and delivery of MWFs to the machining zone - Environmental concerns, supply methods, circulation and monitoring are also discussed - Written by distinguished editors and international team of expert contributors

Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.

Download or read book Development of Environmentally Friendly Dry Machining Process written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. - Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry - Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels - Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity

Download or read book Green Technology and Design for the Environment written by Samir Billatos and published by CRC Press. This book was released on 1997-01-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments have successfully changed our approach to practical applications of engineering by improving the methods of design and manufacturing, for example, shorter development cycles. The text focuses on directing such new methods towards a specific ecological purpose.

Download or read book Machining Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2008-04-23 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering complete coverage of the technologies, machine tools, and operations of a wide range of machining processes, Machining Technology presents the essential principles of machining and then examines traditional and nontraditional machining methods. Available for the first time in one easy-to-use resource, the book elucidates the fundame