Download or read book Environmental Requirements for Electromechanical and Electrical Equipment written by Ray Tricker and published by Newnes. This book was released on 1999-02-16 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction; Ambient Temperature; Solar Radiation; Humidity; Air Pressure and Altitude; Weather and Precipitation; Pollutants and Contaminants, Flora & Fauna; Mechanical; Ergonomics; Electrical; General.

Download or read book GB T 2423 16 2008 English translated version written by Codeofchina.com and published by www.codeofchina.com. This book was released on 2009-10-01 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: GB/T 2423.16-2008 Fireworks and firecracker - Combination fireworks English-translated version

Download or read book Chinese Standard GB GB T GBT JB JB T YY HJ NB HG QC SL SN SH JJF JJG CJ TB YD YS NY FZ JG QB SJ SY DL AQ CB GY JC JR JT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 7263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards and Industry Standards (Total 17,000 standards).

Download or read book GB T 2423 24 2013 Translated English of Chinese Standard GBT2423 24 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-01-06 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 2423 provides guidance for testing equipment or components, under solar radiation conditions. The purpose of the test is to check the extent to which equipment or components are affected by solar radiation. The comprehensive test method can detect changes in electrical, mechanical or other physical properties.

Download or read book GB T GBT Product Catalog Translated English of Chinese Standard GB T GBT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB/T; GBT.

Download or read book GB T 2423 23 2013 Translated English of Chinese Standard GBT2423 23 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-01-06 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 2423 specifies various sealing performance test methods. Test Qa and Qc are rough inspections, to observe the bubbles emerging from the leak. Test Qd is to observe the leakage of liquid, under heating conditions. Test Qy is to make the gas pass through the leak and enter the test box, under reduced pressure, then measure the performance change of the test box. Test Qk, Qm is to use tracer gas to detect small leaks. Test Qf, Ql is to make liquid enter it through the leak, under pressurized conditions, then measure its performance changes. This Part is suitable for testing the sealing performance of various electrical and electronic products. It is also suitable for testing the sealing performance of other sealing parts.

Download or read book GB T 2423 30 2013 Translated English of Chinese Standard GBT2423 30 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-01-06 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 2423 is applicable to the test, in which the test sample is immersed in a cleaning solvent, at a specified temperature, within a specified time. If required by the relevant specifications, the test sample shall be wiped by absorbent cotton or tissue paper, after immersion and drying.

Download or read book GB T 2423 50 2012 Translated English of Chinese Standard GBT2423 50 2012 written by https://www.chinesestandard.net and published by www.ChineseStandard.net. This book was released on 2021-06-30 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 2423 specifies test methods to evaluate the effect of damp heat resistance of small electric and electronic products (mainly non-airtight components) in an accelerated manner. This test does not apply to the evaluation of external effects such as corrosion and deformation.

Download or read book GB T 2423 41 2013 Translated English of Chinese Standard GBT2423 41 2013 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-01-06 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 2423 specifies the terminology for wind pressure test of electrical and electronic products using wind tunnels, requirements for test equipment and test samples (hereinafter referred to as test pieces), test conditions, test methods. This Part is suitable for testing the adaptability of electrical and electronic equipment or components (such as radar antennas, microwave antennas, satellite antennas, etc.), which are installed outdoors, under wind pressure, AND assessing the rationality of their structures.

Download or read book GB T 7345 2008 Translated English of Chinese Standard GB T 7345 2008 GBT7345 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2024-02-02 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the terms and definitions, classification, basic technical requirements and test methods, inspection rules, delivery preparation, user service requirements for control motors and their combinations (hereinafter referred to as motors). This standard provides basic technical requirements and test methods for motors for organizations which have the following needs: a) It is necessary to prove that the motor product has the ability to meet the requirements of users and applicable laws and regulations; b) Ordering or product acceptance; c) Inspection basis; d) Government or industry regulation of product quality. When the optional provisions in this standard are not applicable due to the characteristics of the motor product, they can be deleted. However, the deletion cannot affect the ability or responsibility to prove that the motor product meets the requirements of users and applicable laws and regulations. The test methods specified in this standard are commonly used; users of the standard are allowed to choose and use them. This standard specifies the basic requirements for motors. When there are special requirements, especially for electronic drives, the manufacturer shall formulate special technical conditions. This standard shall be used together with the general technical conditions or special technical conditions for motors. This standard is applicable to various control motors and their combinations; general-purpose motors can also be adopted by reference. GB/T 7345-2008 www.ChineseStandard.net ? Buy True-PDF ? Auto-delivery. Page 5 of 65

Download or read book GB T 2423 59 2008 Translated English of Chinese Standard GB T 2423 59 2008 GBT2423 59 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-04-03 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 2423 specifies the basic requirements, severities, test procedures and other technical details for the combined temperature (cold and heat)/low air pressure/vibration (random) test. This Part applies to the determination of the adaptability of products under the combined effects of temperature (cold and heat), low air pressure and vibration (random). This Part applies as a reference to combined tests with temperature changes.

Download or read book GB T 2423 15 2008 Translated English of Chinese Standard GBT2423 15 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-01-06 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is used to determine whether the adaptability and performance of the structure are good, AND assess the structural integrity of some components, under the action of the force (except gravity), which is generated by components, equipment and other electrical and electronic products (hereinafter referred to as "samples"), subjected to a steady-state acceleration environment, such as those generated by running vehicles, aerial vehicles, rotating machinery and projectiles.

Download or read book GB T 2423 33 2021 Translated English of Chinese Standard GBT2423 33 2021 GB T 2423 33 2021 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-10-02 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the general conditions and methods for the test of samples in the alternating climate of condensed water containing high concentration sulfur dioxide, especially for the sulfur dioxide concentration that is not included in GB/T 9789-2008, so that when tests are carried out in different laboratories, comparable test results can be obtained. This document is used to determine the suitability of products and their materials in chemically corrosive environments. The content of this document does not include sample shape, sample preparation and analysis, and evaluation of test results. Regarding these provisions, refer to the relevant standards or negotiate in accordance with the specific situation.

Download or read book GB GB T GBT Chinese Standard English translated version Catalog written by Dr. Meng Yongye and published by www.codeofchina.com. This book was released on 2018-05-03 with total page 3290 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com

Download or read book List of English translated Chinese standards GB T written by https://www.codeofchina.com and published by https://www.codeofchina.com. This book was released on with total page 3495 pages. Available in PDF, EPUB and Kindle. Book excerpt: HTTPS://WWW.CODEOFCHINA.COM EMAIL:[email protected] "Codeofchina Inc., a part of TransForyou (Beijing) Translation Co., Ltd., is a professional Chinese code translator in China. Now, Codeofchina Inc. is running a professional Chinese code website, www.codeofchina.com. Through this website, Codeofchina Inc. provides English-translated Chinese codes to clients worldwide. About TransForyou TransForyou (Beijing) Translation Co., Ltd., established in 2003, is a reliable language service provider for clients at home and abroad. Since our establishment, TransForyou has been aiming to build up a translation brand with our professional dedicated service. Currently, TransForyou is the director of China Association of Engineering Construction Standardization (CECS); the committeeman of Localization Service Committee / Translators Association of China (TAC) and the member of Boya Translation Culture Salon (BTCS); and the field study center of the University of the University of International Business & Economics (UIBE) and Hebei University (HU). In 2016, TransForyou ranked 27th among Asian Language Service Providers by Common Sense Advisory. "

Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.

Download or read book GB T 15478 2015 Translated English of Chinese Standard GBT 15478 2015 GB T15478 2015 GBT15478 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-11-02 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the test conditions, the general provisions of the test, the test items and the test methods, AND data calculation and processing for the performance of the pressure sensor.