Download or read book Environmental Management in the Pulp and Paper Industry written by and published by UNEP/Earthprint. This book was released on 1996 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This technical report examines the environmental issues facing the pulp & paper industry & shows how these issues can be addressed. It discusses the production process, the origins of pollution & other impacts on the industry. It also recommends procedures for reducing these impacts.
Download or read book Management of Pulp and Paper Mill Waste written by Pratima Bajpai and published by Springer. This book was released on 2014-11-07 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and paper mill industries are always associated with the disposal problem of highly contaminated sludge or bio-solids. The development of innovative systems to maximize recovery of useful materials and/or energy in a sustainable way has become necessary. The management of wastes, in particular of industrial waste, in an economically and environmentally acceptable manner is one of the most critical issues facing modern industry, mainly due to the increased difficulties in properly locating disposal works and complying with even more stringent environmental quality requirements imposed by legislation. This book presents a general Introduction on waste management in the pulp and paper industry and contains topics on the generation of waste in pulp and paper mills, waste composition, methods of sludge pre-treatment, processes and technologies for conversion of pulp and paper mill waste into valuable products, waste reduction techniques employed in the pulp and paper Industry worldwide and future trends.
Download or read book Environmental Management in the Pulp and Paper Industry written by United Nations Environment Programme and published by . This book was released on 1983 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Green Chemistry and Sustainability in Pulp and Paper Industry written by Pratima Bajpai and published by Springer. This book was released on 2016-10-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features in-depth and thorough coverage of Minimum Impact Mill Technologies which can meet the environmental challenges of the pulp and paper industry and also discusses Mills and Fiberlines that encompass “State-of-the-Art” technology and management practices. The minimum impact mill does not mean "zero effluent", nor is it exclusive to one bleaching concept. It is a much bigger concept which means that significant progress must be made in the following areas: Water Management, Internal Chemical Management, Energy Management, Control and Discharge of Non-Process Elements and Removal of Hazardous Pollutants. At the moment, there is no bleached kraft pulp mill operating with zero effluent. With the rise in environmental awareness due to the lobbying by environmental organizations and with increased government regulation there is now a trend towards sustainability in the pulp and paper industry. Sustainable pulp and paper manufacturing requires a holistic view of the manufacturing process. During the last decade, there have been revolutionary technical developments in pulping, bleaching and chemical recovery technology. These developments have made it possible to further reduce loads in effluents and airborne emissions. Thus, there has been a strong progress towards minimum impact mills in the pulp and paper industry. The minimum-impact mill is a holistic manufacturing concept that encompasses environmental management systems, compliance with environmental laws and regulations and manufacturing technologies.
Download or read book Environmental Impact Assessment and Environmental Auditing in the Pulp and Paper Industry written by Food and Agriculture Organization of the United Nations and published by Conran Octopus. This book was released on 1996 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biotechnology for Environmental Protection in the Pulp and Paper Industry written by P. Bajpai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and paper production has increased globally and will continue to increase in the near future. Approximately 155 million tons of wood pulp is produced worldwide and about 260 million is projected for the year 2010. To be able to cope with increasing demand, an increase in productivity and improved environmental performance is needed as the industry is also under constant pressure to reduce and modify environmental emissions to air and water. The authors give updated information on various biotechnological processes useful in the pulp and paper industry which could help in reducing the environmental pollution problem, in addition to other benefits. Various chapters deal with the latest developments in such areas as raw material preparation, pulping, bleaching, water management, waste treatment and utilization. The book also covers the environmental regulations in various parts of the world as well as the role of biotechnology in reducing environmental problems.
Download or read book Environmental Management in the Pulp and Paper Industry written by Industry and Environment Office and published by . This book was released on 1981 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Green Chemistry and Sustainability in Pulp and Paper Industry written by Pratima Bajpai and published by Springer. This book was released on 2015-06-23 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features in-depth and thorough coverage of Minimum Impact Mill Technologies which can meet the environmental challenges of the pulp and paper industry and also discusses Mills and Fiberlines that encompass “State-of-the-Art” technology and management practices. The minimum impact mill does not mean "zero effluent", nor is it exclusive to one bleaching concept. It is a much bigger concept which means that significant progress must be made in the following areas: Water Management, Internal Chemical Management, Energy Management, Control and Discharge of Non-Process Elements and Removal of Hazardous Pollutants. At the moment, there is no bleached kraft pulp mill operating with zero effluent. With the rise in environmental awareness due to the lobbying by environmental organizations and with increased government regulation there is now a trend towards sustainability in the pulp and paper industry. Sustainable pulp and paper manufacturing requires a holistic view of the manufacturing process. During the last decade, there have been revolutionary technical developments in pulping, bleaching and chemical recovery technology. These developments have made it possible to further reduce loads in effluents and airborne emissions. Thus, there has been a strong progress towards minimum impact mills in the pulp and paper industry. The minimum-impact mill is a holistic manufacturing concept that encompasses environmental management systems, compliance with environmental laws and regulations and manufacturing technologies.
Download or read book Environmental impact analysis of pulp and paper production written by Matthias Okoro and published by GRIN Verlag. This book was released on 2014-10-01 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seminar paper from the year 2012 in the subject Environmental Sciences, grade: A, University of Nigeria (CENTER FOR ENVIRONMENTAL MANAGEMENT AND CONTROL), course: ENVIRONMENTAL MANAGEMENT AND CONTROL, language: English, abstract: The complexity of the paper issue means that firm conclusions are hard to draw. All paper manufactures causes harm to the environment and more often than not the determining factors in a paper mills. Environmental performance is not the process, paper type or fiber source but the location, mill practice and mill operator. Hence to try to grade paper products or production techniques into some kind of hierarchy of environmental performance, based solely on the manufacture process, is extremely difficult. Yet, globally however, the environmental impact of paper is significant, which has led to changes in industry and behavior at both business and personal levels. With the use of modern technology such as the printing press and the highly mechanized harvesting of wood, paper has become a cheap commodity everywhere. This has led to a high level of consumption and waste. With the rise in environmental awareness on the pollution of the Eco- system by the effluent of pulp and paper it became imperative to run a clearer analysis of its environmental impact.
Download or read book Pulp and Paper Industry written by Pratima Bajpai and published by Elsevier. This book was released on 2017-02-25 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and Paper Industry: Emerging Waste Water Treatment Technologies is the first book which comprehensively reviews this topic. Over the past decade, pulp and paper companies have continued to focus on minimizing fresh water use and effluent discharges as part of their move towards sustainable operating practices. Three stages—basic conservation, water reuse and water recycling—provide a systematic approach to water resource management. Implementing these stages requires increased financial investment and better utilization of water resources. The ultimate goal for pulp and paper companies is to have effluent-free factories with no negative environmental impact. The traditional water treatment technologies that are used in paper mills are not able to remove recalcitrant contaminants. Therefore, advanced water treatment technologies are being included in industrial wastewater treatment chains aiming to either improve water biodegradability or its final quality. This book discusses various measures being adopted by the pulp and paper industry to reduce water consumption and treatment techniques to treat wastewater to recover it for reuse. The book also examines the emerging technologies for treatment of effluents and presents examples of full-scale installations. - Provides thorough and in-depth coverage of advanced treatment technologies which will benefit the industry personnel, pulp manufacturers, researchers and advanced students - Presents new treatment strategies to improve water reuse and fulfill the legislation in force regarding wastewater discharge - Presents viable solutions for pulp and paper manufacturers in terms of wastewater treatment - Presents examples of full-scale installations to help motivate mill personnel to incorporate new technologies
Download or read book Environmental Management in the Pulp and Paper Industry written by United Nations Environment Programme. Industry & Environment Office and published by . This book was released on 1983 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Environmental Control written by Allan M. Springer and published by . This book was released on 1993 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Management in the Pulp and Paper Industry written by Industry and Environment Office and published by . This book was released on 1981 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Environmental Performance Metrics written by National Academy of Engineering and National Research Council and published by National Academies Press. This book was released on 1999-08-24 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Environmental Performance Metrics is a corporate-focused analysis that brings clarity and practicality to the complex issues of environmental metrics in industry. The book examines the metrics implications to businesses as their responsibilities expand beyond the factory gateâ€"upstream to suppliers and downstream to products and services. It examines implications that arise from greater demand for comparability of metrics among businesses by the investment community and environmental interest groups. The controversy over what sustainable development means for businesses is also addressed. Industrial Environmental Performance Metrics identifies the most useful metrics based on case studies from four industriesâ€"automotive, chemical, electronics, and pulp and paperâ€"and includes specific corporate examples. It contains goals and recommendations for public and private sector players interested in encouraging the broader use of metrics to improve industrial environmental performance and those interested in addressing the tough issues of prioritization, weighting of metrics for meaningful comparability, and the longer term metrics needs presented by sustainable development.
Download or read book Environmentally Friendly Technologies for the Pulp and Paper Industry written by Raymond A. Young and published by John Wiley & Sons. This book was released on 1997-11-19 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solving the pulp and paper industries' environmental problems is essential to maintaining the forest industry and accommodating the changing economic needs of forest communities. This book explores the construction of new mills--operating on new technology that does not produce pollutants--which are vital to the pulp and paper industry.
Download or read book Sound Environmental Management in the Pulp and Paper Industry written by YK:n ympäristöohjelma and published by . This book was released on 1987 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SOUND ENVIRONMENTAL MANAGEMENT IN THE PULP AND PAPER INDUSTRY SEMINAR PAPERS AND DOCUMENTS written by and published by . This book was released on 1987 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
