Download or read book Environmental Impact Assessment of Buildings written by Wahidul Biswas and published by MDPI. This book was released on 2020-02-05 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue covers a wide range of areas—including building orientation, service life, use of photocatalytically active structures and PV facades, implications of transportation system, building types (i.e., high rise, multilevel, commercial, residential), life cycle assessment, and structural engineering—that need to be considered in the environmental impact assessment of buildings, and the chapters include case studies across the globe. Consideration of these strategies would help reduce energy and material consumption, environmental emissions, and waste generation associated with all phases of a building’s life cycle. Chapter 1 demonstrates that green star concrete exhibits the same structural properties as conventional concrete in Australia. Chapter 2 showed that the use of TiO2 as a photocatalyst on the surface of construction materials with a suitable stable binding agent, such as aggregates, would enable building walls to absorb NOx from air. This study found that TiO2 has the potential to reduce ambient concentrations of NOx from areas where this pollutant becomes concentrated under solar irradiation. Chapter 3 presents the life cycle assessment of architecturally integrated glass–glass photovoltaics in building facades to find the appropriate material composition for a multicolored PV façade offering improved environmental performance. Chapter 4 shows that urban office buildings lacking appropriate orientation experienced indoor overheating. Chapter 5 details four modeling approaches that were implemented to estimate buildings’ response towards load shedding. Chapter 6 covers the life cycle GHG emissions of high-rise residential housing block to discover opportunities for environmental improvement. Chapter 7 discusses an LCA framework that took into account variation in the service life of buildings associated with the use of different types of materials. Chapter 8 presents a useful data mining algorithm to conduct life cycle asset management in residential developments built on transport systems.
Download or read book Life Cycle Assessment in the Built Environment written by Robert Crawford and published by Routledge. This book was released on 2011-03-10 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life cycle assessment enables the identification of a broad range of potential environmental impacts occurring across the entire life of a product, from its design through to its eventual disposal or reuse. The need for life cycle assessment to inform environmental design within the built environment is critical, due to the complex range of materials and processes required to construct and manage our buildings and infrastructure systems. After outlining the framework for life cycle assessment, this book uses a range of case studies to demonstrate the innovative input-output-based hybrid approach for compiling a life cycle inventory. This approach enables a comprehensive analysis of a broad range of resource requirements and environmental outputs so that the potential environmental impacts of a building or infrastructure system can be ascertained. These case studies cover a range of elements that are part of the built environment, including a residential building, a commercial office building and a wind turbine, as well as individual building components such as a residential-scale photovoltaic system. Comprehensively introducing and demonstrating the uses and benefits of life cycle assessment for built environment projects, this book will show you how to assess the environmental performance of your clients’ projects, to compare design options across their entire life and to identify opportunities for improving environmental performance.
Download or read book Evaluation of the Built Environment for Sustainability written by Vicenzo Bentivegna and published by Taylor & Francis. This book was released on 2003-09-02 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainability in the built environment is a major issue facing policy-makers, planners, developers and designers in the UK, Europe and worldwide. The measuring of buildings and cities for sustainability becomes increasingly important as pressure for green, sustainable development translates into policy and legislation. The problems of such measurement and evaluation are presented by the authors in contributions which move from the general to the particular, e.g. from a general framework for an environmentally sustainable form of urban development to a specific input-output model application to environmental problems. The book is divided into three parts: the first covers city models and sustainable systems - research programmes, environmental policies, green corporations and collaborative strategies to make urban development more sustainable; part two discusses the problems of evaluating the built environment in planning and construction, covering economic and environmental methods and construction, development and regeneration processes; part three illustrates a number of applications using different approaches and techniques and referring to a range of environmental aspects of the natural and built environment, from maintaining historic buildings to transport management and air pollution monitoring.
Download or read book Managing Environmental Impact Assessment for Construction and Operation in New Nuclear Power Programmes written by and published by International Atomic Energy Agency. This book was released on 2014 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides a holistic approach to environmental protection in new nuclear power programs. It describes the Environmental Impact Assessment (EIA) process, the subsequent utilization of the EIA, and the necessary infrastructure for such processes. The presumption is that a Member State embarking on such a program already has an environmental regulatory framework in place, which may not be developed for nuclear power but for industrial projects, therefore the emphasis is on the environmental aspects that are unique to a nuclear power plant project. The publication is addressed to senior managers, project managers or coordinators and technical specialists of government authorities and agencies, including the regulatory body, operating organizations and supporting industries and other organizations involved in environmental issues.
Download or read book Environmental Management in Construction written by Heng Li and published by Routledge. This book was released on 2007-01-24 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demands on the construction industry are changing, and it is now virtually essential for environmental management to be considered at all stages of a project. Many construction managers are finding a quantitative approach useful, and this book outlines four quantitative methods which can be applied at different construction stages, and which fit within a comprehensive framework of dynamic Environmental Impact Assessment (EIA). These include: a method to quantitatively evaluate and reduce pollution and hazards levels a method to evaluate the environmental-consciousness of proposed construction plans a method to reduce on-site construction wastes through an incentive reward programme a method to promote C and D waste exchange in the local construction industry. With an experimental case study of the application of these methods, this book delivers a comprehensive review of environmental management issues in construction. With regulatory requirements potentially favouring the quantitative approach, this timely guide ensures that contractors will be able to keep pace with environmental management standards.
Download or read book Methods of Environmental Impact Assessment written by Peter Morris and published by Taylor & Francis. This book was released on 2001 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts, this text deals with how environmental impact assessment should be carried out for specific environmental components such as air and water.
Download or read book Environment Impact Assessment written by K. M. Baharul Islam and published by Taylor & Francis. This book was released on 2021-06-23 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environment Impact Assessment: Precept & Practice deals with theoretical, practical, managerial and legal issues in multidisciplinary holism to suit Indian environmental planning and governance. Environment Impact Assessment is not only considered a tool for sustainable development but a promissory augury of creation of equitable regime of for ecosystem governance. The book is laced with polemical issues in dexterous detail to cater erudite demand of environmental planners besides fulfilling the void of curriculum and pedagogic requirements of technical universities, environmental management and legal studies. The book offers diversity of thoughts across discipline on Environment Impact Assessment discourse in rounded perspective having immense potential for textual and reference utilities. The treatment of subject is not only discursive but paradigmatic to eradicate contemporary crisis in Environment Impact Assessment regime. It combines theoretical postulate with deeper empiricism and penetrative case studies to make an intriguing subject of Environment Impact Assessment with greater ease and lucidity. Note: T&F does not sell or distribute the Hardback in India, Pakistan, Nepal, Bhutan, Bangladesh and Sri Lanka.
Download or read book Environmental Impact Analysis written by University of Illinois at Urbana-Champaign. Department of Architecture and published by Urbana : University of Illinois Press. This book was released on 1978 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Environmental Impact Assessment written by John Glasson and published by Taylor & Francis. This book was released on 2005 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Looking at the importance of environmental impact assessements, this title includes all the latest theoretical and practical procedures of EIA, as well as including the latest changes to UK legislation.
Download or read book Environmental Management in Construction written by Heng Li and published by Routledge. This book was released on 2007-01-24 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demands on the construction industry are changing, and it is now virtually essential for environmental management to be considered at all stages of a project. Many construction managers are finding a quantitative approach useful, and this book outlines four quantitative methods which can be applied at different construction stages, and which fit within a comprehensive framework of dynamic Environmental Impact Assessment (EIA). These include: a method to quantitatively evaluate and reduce pollution and hazards levels a method to evaluate the environmental-consciousness of proposed construction plans a method to reduce on-site construction wastes through an incentive reward programme a method to promote C and D waste exchange in the local construction industry. With an experimental case study of the application of these methods, this book delivers a comprehensive review of environmental management issues in construction. With regulatory requirements potentially favouring the quantitative approach, this timely guide ensures that contractors will be able to keep pace with environmental management standards.
Download or read book Whole Building Life Cycle Assessment written by Wblca Guide Special Project Working Group and published by . This book was released on 2018-08-31 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This report serves as a guide for the project team to define and model the structural system within the reference building design as required by green building standards and rating systems.
Download or read book Towards a Methodology for Life Cycle Impact Assessment written by Society of Environmental Toxicology and Chemistry and published by . This book was released on 1996 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Examining the Environmental Impacts of Materials and Buildings written by Brownell, Blaine Erickson and published by IGI Global. This book was released on 2020-02-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental environmental challenges such as climate change, resource depletion, and pollution are still widely relevant in today’s world. Many of these problems have been associated with the architecture, engineering, and construction industries due to the level of resources used in these professions. In recent years, many manufacturers in these fields have expressed the motivation to make necessary changes that would be beneficial to the environment. Despite this progress, there remains a lack of research and assessment on the methods to achieve environmental stability within these architectural fields. Examining the Environmental Impacts of Materials and Buildings provides emerging research exploring the theoretical and practical aspects of ecological performance within modern building design and materials-based construction. Featuring coverage on a broad range of topics such as life cycle assessment, material flows analysis, and sustainability, this book is ideally designed for architects, civil engineers, construction professionals, environmentalists, ecologists, business practitioners, scientists, policymakers, designers, researchers, and academicians seeking research on current trends in environmental performance within building design.
Download or read book Seismic Performance Assessment of Buildings Methodology for assessing environmental impacts written by and published by . This book was released on 2018 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Impact Assessment written by Chris Wood and published by Routledge. This book was released on 2014-01-14 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Impact Assessment (EIA) has become a vital management tool worldwide. EIA is a means of evaluating the likely consequences of a proposed major action which will significantly affect the environment, before that action is taken.This new edition of Wood's key text provides an authoritative, international review of environmental impact assessment, comparing systems used in the UK, USA, the Netherlands, Canada, the Commonwealth of Australia and New Zealand and South Africa.
Download or read book Life Cycle Sustainability Assessment LCSA written by Subramanian Senthilkannan Muthu and published by Springer Nature. This book was released on 2021-09-21 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Life Cycle Assessment (ELCA) that was developed about three decades ago demands a broadening of its scope to include lifecycle costing and social aspects of life cycle assessment as well, drawing on the three-pillar or ‘triple bottom line’ model of sustainability, which is the result of the development of the Life Cycle Sustainability Assessment (LCSA). LCSA refers to the evaluation of all environmental, social and economic negative impacts and benefits in decision-making processes towards more sustainable products throughout their life cycle. Combination of environmental and social life cycle assessments along with life cycle costing leads to life cycle sustainability assessment (LCSA). This book highlights various aspects of life cycle sustainability assessment (LCSA).
Download or read book Planning and Environmental Impact Assessment in Practice written by Joe Weston and published by Routledge. This book was released on 2014-06-11 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Impact Assessment (EIA) is a fast-growing field of land-use planning affecting many disciplines. At present, UK Government legislation requires EIA for certain types of development. Subject to a further new European directive, an EIA will be required for all policies, plans and programmes. Planning and Environmental Impact Assessment in Practice provides a practical introduction to the subject and relates the theory to the practice through extensive use of case studies. Edited by Joe Weston, the book draws on contributions from a number of practising experts in the field and covers topics such as: assessing the need for EIAs; the environmental team; scoping and public participation; internal and external consultation; local lobbying; local authority review and decision-making; public enquiries; monitoring the impacts; pollution control; and the lessons to be learned. Planning and Environmental Impact Assessment in Practice provides a practical introduction to EIA for final year undergraduate and postgraduate MSc courses in planning, geography, civil engineering, building and estate management, and development.
