Download or read book Environmental Hydraulics Turbulence and Sediment Transport 2nd Edition written by Jaan H Pu and published by . This book was released on 2024-06-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the search for sustainable city solutions, engineers face a bottleneck situation in balancing development and the intensified environmental challenges induced by scaled-up flooding, over-grown river vegetation, sediment transport, bridge and coastal scouring, and excessive pollution. The coupling impacts of uncontrolled flood and sediment to a city has caused difficulty in its management. Various numerical, theoretical, and experimental approaches have been proposed to reproduce flow and sediment transport conditions in real-world urban rivers, in order to perfect management strategies for them. This reprint, which is built from a well-planned journal's Special Issue, aims to construct a collection of state-of-the-art studies and technologies to give insights to the related environmental, river, and sustainable city research and engineering communities. It is related and, hence, useful for environmental, river, and hydraulic engineers, authorities, and researchers to understand the current state-of-the-art practices in urbanized flow modelling, as well as vegetation- and sediment-related management. It also serves as a good knowledge source for research, post- or undergraduate students, in terms of knowledge about the most up-to-date topical advances.

Download or read book Modeling and Practice of Erosion and Sediment Transport under Change written by Mohamed Meddi and published by MDPI. This book was released on 2019-09-17 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate and anthropogenic changes impact the conditions of erosion and sediment transport in rivers. Rainfall variability and, in many places, the increase of rainfall intensity have a direct impact on rainfall erosivity. Increasing changes in demography have led to the acceleration of land cover changes in natural areas, as well as in cultivated areas, and, sometimes, in degraded areas and desertified landscapes. These anthropogenized landscapes are more sensitive to erosion. On the other hand, the increase in the number of dams in watersheds traps a great portion of sediment fluxes, which do not reach the sea in the same amount, nor at the same quality, with consequences on coastal geomorphodynamics. This book is dedicated to studies on sediment fluxes from continental areas to coastal areas, as well as observation, modeling, and impact analysis at different scales from watershed slopes to the outputs of large river basins. This book is concentrated on a number of keywords: “erosion” and “sediment transport”, “model” and “practice”, and “change”. The keywords are briefly discussed with respect to the relevant literature. The contributions in this book address observations and models based on laboratory and field data, allowing researchers to make use of such resources in practice under changing conditions.

Download or read book Environmental Hydraulics Turbulence and Sediment Transport written by and published by . This book was released on 2022-02-24 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Environmental Hydraulics Volume 2 written by Georgos C. Christodoulou and published by CRC Press. This book was released on 2022-03-07 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last two decades environmental hydraulics as an academic discipline has expanded considerably, caused by growing concerns over water environmental issues associated with pollution and water balance problems on regional and global scale. These issues require a thorough understanding of processes related to environmental flows and transport phenomena, and the development of new approaches for practical solutions. Environmental Hydraulics includes about 200 contributions from 35 countries presented at the 6th International Symposium on Environmental Hydraulics (Athens, Greece, 23-25 June 2010). They cover the state-of-the-art on a broad range of topics, including: fundamentals aspects of environmental fluid mechanics, environmental hydraulics problems of inland, coastal and ground waters, interfacial processes; computational, experimental and field measurement techniques, ecological aspects, and effects of global climate change. Environmental Hydraulics will be of interest to researchers, civil/environmental engineers, and professional engineers dealing with the design and operation of environmental hydraulic works such as wastewater treatment and disposal, river and marine constructions, and to academics and graduate students in related fields.

Download or read book Environmental Hydraulics Two Volume Set written by George C. Christodoulou and published by CRC Press. This book was released on 2010-06-09 with total page 1240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last two decades environmental hydraulics as an academic discipline has expanded considerably, caused by growing concerns over water environmental issues associated with pollution and water balance problems on regional and global scale. These issues require a thorough understanding of processes related to environmental flows and transport

Download or read book Fluid Mechanics of Environmental Interfaces Second Edition written by Carlo Gualtieri and published by CRC Press. This book was released on 2012-11-21 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Fluid Mechanics (EFM) studies the motion of air and water at several different scales, the fate and transport of species carried along by these fluids, and the interactions among those flows and geological, biological, and engineered systems. EFM emerged some decades ago as a response to the need for tools to study problems of flow and transport in rivers, estuaries, lakes, groundwater and the atmosphere; it is a topic of increasing importance for decision makers, engineers, and researchers alike. The second edition of the successful textbook "Fluid Mechanics of Environmental Interfaces" is still aimed at providing a comprehensive overview of fluid mechanical processes occurring at the different interfaces existing in the realm of EFM, such as the air-water interface, the air-land interface, the water-sediment interface, the surface water-groundwater interface, the water-vegetation interface, and the water-biological systems interface. Across any of these interfaces mass, momentum, and heat are exchanged through different fluid mechanical processes over various spatial and temporal scales. In this second edition, the unique feature of this book, considering all the topics from the point of view of the concept of environmental interface, was maintained while the chapters were updated and five new chapters have been added to significantly enlarge the coverage of the subject area. The book starts with a chapter introducing the concept of EFM and its scope, scales, processes and systems. Then, the book is structured in three parts with fifteen chapters. Part one, which is composed of four chapters, covers the processes occurring at the interfaces between the atmosphere and the surface of the land and the seas, including the transport of dust and the dispersion of passive substances within the atmosphere. Part two deals in five chapters with the fluid mechanics at the air-water interface at small scales and sediment-water interface, including the advective diffusion of air bubbles, the hyporheic exchange and the tidal bores. Finally, part three discusses in six chapters the processes at the interfaces between fluids and biotic systems, such as transport processes in the soil-vegetation-lower atmosphere system, turbulence and wind above and within the forest canopy, flow and mass transport in vegetated open channels, transport processes to and from benthic plants and animals and coupling between interacting environmental interfaces. Each chapter has an educational part, which is structured in four sections: a synopsis of the chapter, a list of keywords that the reader should have encountered in the chapter, a list of questions and a list of unsolved problems related to the topics covered by the chapter. The book will be of interest to graduate students and researchers in environmental sciences, civil engineering and environmental engineering, (geo)physics, atmospheric science, meteorology, limnology, oceanography, and applied mathematics.

Download or read book Introduction To Hydraulics Of Fine Sediment Transport An Second Edition written by Ashish J Mehta and published by World Scientific. This book was released on 2022-11-22 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book expounds the hydraulics of fine sediment which is almost ubiquitously found in coastal and estuarine waters, and in rivers, lakes, and reservoirs. Although the basic subject may be categorized as applied marine physics in shallow waters, several physicochemical and biological effects on particulate transport have been addressed.In this second edition most of the chapters have been substantially updated, rewritten, and expanded. Overall, a significant change has also been made throughout by replacing sediment concentration, a unit dependent quantity at the heart of numerous descriptions, measurements, and calculations, with the nondimensional sediment volume fraction. It marks a divergence in the manner in which fine sediment transport data and calculations are conventionally presented.The book is mainly written for civil engineering seniors and graduate students, to offer a comprehensive foundation in hydraulics of fine sediment. The book is also a useful reference for researchers interested in the effects of physical chemistry and biology on fine sediment transport in water and to an extent on coastal and estuarine morphodynamics, sediment transport, port and harbor engineering, and applied shallow watwer marine physics. The book is also recommended reading for those interested in understanding particle transport in water.Related Link(s)

Download or read book Environmental Hydraulics written by V.P. Singh and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Triggerd primarily byill effects of polluted air, soil and water resources on living species, public concern for environmental quality has been growing during the past four decades or so. One manifestation of this concern is found in occurrence of public debates as well as in the demand for full environmental impact assessment before a water-resources project is approved. Engineering soundness and economic feasibility are no longer sufficient criteria for construction of hydraulic works. As a result, environmental considerations have become very much a part of hydraulic analyses. In response to growing environmental concerns, the field of hydraulics has expanded and a new branch, called Environmental Hydraulics, has emerged. The focus of this branch is on hydraulic analyses of those environmental issues that are important for protection, restoration, and managementof environmental quality. The motivation for this book grew out of the desire to provide a hydraulic discussion of some of the key environmental issues.It is hoped that the book would serve to stimulate others to write more comprehensive texts on this subject of growing importance.

Download or read book Practical Channel Hydraulics 2nd edition written by Donald W. Knight and published by CRC Press. This book was released on 2018-03-05 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Channel Hydraulics is a technical guide for estimating flood water levels in rivers using the innovative software known as the Conveyance and Afflux Estimation System (CES-AES). The stand alone software is freely available at HR Wallingford’s website www.river-conveyance.net. The conveyance engine has also been embedded within industry standard river modelling software such as InfoWorks RS and Flood Modeller Pro. This 2nd Edition has been greatly expanded through the addition of Chapters 6-8, which now supply the background to the Shiono and Knight Method (SKM), upon which the CES-AES is largely based. With the need to estimate river levels more accurately, computational methods are now frequently embedded in flood risk management procedures, as for example in ISO 18320 (‘Determination of the stage-discharge relationship’), in which both the SKM and CES feature. The CES-AES incorporates five main components: A Roughness Adviser, A Conveyance Generator, an Uncertainty Estimator, a Backwater Module and an Afflux Estimator. The SKM provides an alternative approach, solving the governing equation analytically or numerically using Excel, or with the short FORTRAN program provided. Special attention is paid to calculating the distributions of boundary shear stress distributions in channels of different shape, and to appropriate formulations for resistance and drag forces, including those on trees in floodplains. Worked examples are given for flows in a wide range of channel types (size, shape, cover, sinuosity), ranging from small scale laboratory flumes (Q = 2.0 1s-1) to European rivers (~2,000 m3s-1), and large-scale world rivers (> 23,000 m3s-1), a ~ 107 range in discharge. Sites from rivers in the UK, France, China, New Zealand and Ecuador are considered. Topics are introduced initially at a simplified level, and get progressively more complex in later chapters. This book is intended for post graduate level students and practising engineers or hydrologists engaged in flood risk management, as well as those who may simply just wish to learn more about modelling flows in rivers.

Download or read book Mechanics of Coastal Sediment Transport written by J?rgen Freds?e and published by World Scientific. This book was released on 1992 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats the subject of sediment transport in the marine environment, covering transport of non-cohesive sediment by waves and current in- and outside the surf zone. It can be read independently, but a background in hydraulics and basic wave mechanics is required. It is intended for M.Sc. and Ph.D. students. The primary aim of the book is to describe the physical processes of sediment transport and how to represent them in mathematical models. It does not present a large number of different formulae for the sediment transport rates under various conditions. The book can be divided in two main parts; in the first, the relevant hydrodynamic theory is described; in the second, sediment transport and morphological development are treated. The hydrodynamic part contains a review of elementary theory for water waves, chapters on the turbulent wave boundary layer and the turbulent interaction between waves and currents, and finally, surf zone hydrodynamics and wave driven currents. The part on sediment transport introduces the basic concepts (critical bed shear stress, bed load, suspended load and sheet layer, near-bed concentration, effect of sloping bed); it treats suspended sediment in waves and current and in the surf zone, and current and wave-generated bed forms. Finally, the modelling of cross-shore and long-shore sediment transport is described together with the development, of coastal profiles and coastlines.

Download or read book Environmental Management Handbook Second Edition Six Volume Set written by Sven Erik Jorgensen and published by CRC Press. This book was released on 2022-07-30 with total page 3829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together a wealth of knowledge, the Handbook of Environmental Management, Second Edition, gives a comprehensive overview of environmental problems, their sources, their assessment, and their solutions. Through in-depth entries, and a topical table of contents, readers will quickly find answers to questions about pollution and management issues. This six-volume set is a reimagining of the award-winning Encyclopedia of Environmental Management, published in 2013, and features insights from more than 500 contributors, all experts in their fields. The experience, evidence, methods, and models used in studying environmental management is presented here in six stand-alone volumes, arranged along the major environmental systems. Features of the new edition: The first handbook that demonstrates the key processes and provisions for enhancing environmental management. Addresses new and cutting -edge topics on ecosystem services, resilience, sustainability, food-energy-water nexus, socio-ecological systems and more. Provides an excellent basic knowledge on environmental systems, explains how these systems function and offers strategies on how to best manage them. Includes the most important problems and solutions facing environmental management today.

Download or read book Environmental Hydraulics and Sustainable Water Management Two Volume Set written by J.H.W. Lee and published by CRC Press. This book was released on 2004-12-15 with total page 2342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set, with cd-rom, comprises the Proceedings of the 4th International Symposium on Environmental Hydraulics & the 14th Congress of Asia and Pacific Division, International Association of Hydraulic Engineering and Research held in December 2004 in Hong Kong. Volume 1 covers the selected papers presented at the 4th Internation

Download or read book Hydraulics in Civil and Environmental Engineering Fourth Edition written by Andrew Chadwick and published by CRC Press. This book was released on 2004-05-27 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Find out more about Hydraulics in Civil and Environmental Engineering Fifth Edition on CRC Press at http://www.crcpress.com/product/isbn/9780415672450

Download or read book Tunnelling A Decade of Progress GeoDelft 1995 2005 written by Adam Bezuijen and published by CRC Press. This book was released on 2005-12-22 with total page 1306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following years of research, the first bored tunnel in soft soil in the Netherlands, the Tweede Heinenoord tunnel, was completed in 1998. Since then, Dutch engineers have increased their knowledge of soft soil tunnelling, with a significant and important part of this research being carried out by GeoDelft, the Dutch National Institute of Geo-Engineering. This book contains the most important publications by GeoDelft on the subject of soft soil tunnelling, focusing on the period from 1992 to the present, it is divided into four main headings: field measurements; grout behaviour; model testing; and numerical analysis. This impressive overview of the progress made in the Netherlands in soft soil tunnelling research over more than a decade is a valuable resource to those working in soft soil tunnelling worldwide.

Download or read book Environmental Fluid Mechanics written by Wolfgang Rodi and published by CRC Press. This book was released on 2012-05-28 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the written versions of invited lectures presented at the Gerhard H. Jirka Memorial Colloquium on Environmental Fluid Mechanics, held June 3-4, 2011, in Karlsruhe, Germany. Professor Jirka was widely known for his outstanding work in Environmental Fluid Mechanics, and 23 eminent world-leading experts in this field contributed to

Download or read book Computational Fluid Dynamics written by Paul D. Bates and published by John Wiley & Sons. This book was released on 2005-05-27 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uniquely outlines CFD theory in a manner relevant to environmental applications. This book addresses the basic topics in CFD modelling in a thematic manner to provided the necessary theoretical background, as well as providing global cases studies showing how CFD models can be used in practice demonstrating how good practice can be achieved, with reference to both established and new applications. First book to apply CFD to the environmental sciences Written at a level suitable for non-mathematicians

Download or read book Turbulence in Open Channel Flows written by Hiroji Nakagawa and published by Routledge. This book was released on 2017-10-02 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of open channel turbulence, focusing especially on certain features stemming from the presence of the free surface and the bed of a river. Part one presents the statistical theory of turbulence; Part two addresses the coherent structures in open-channel flows and boundary layers.