Download or read book Environmental Geomechanics written by Bernhard A. Schrefler and published by John Wiley & Sons. This book was released on 2013-03-28 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a range of topics that are of increasing importance in engineering practice: natural hazards, pollution, and environmental protection through good practice. The first half of the book deals with natural risk factors, of both natural and human origin, that should be considered: subsidence, accidental infiltration, soil instability, rockslides and mudslides, debris flow, and degradation of buildings and monuments due to pollution and climactic effects, for example. These problems are highlighted and it is shown that a combination of sophisticated numerical techniques and extensive experimental investigations are necessary in order to effectively tackle these problems. The second half of the book is devoted to the use of polluted sites and associated problems, a topic of growing significance given the increasing reclamation of land from abandoned industrial sites for urban development over the last 20 years. Different types of oil pollution and decontamination methods are described, followed by a discussion of waste management and detailed coverage of confinement liners used in surface waste disposal.
Download or read book Environmental Geomechanics written by Bernhard A. Schrefler and published by Springer Science & Business Media. This book was released on 2001-11-07 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Geomechanics covers a broad class of problems where deforming geomaterials are involved, usually coupled with fluid flow and transport of some substance. Transport of contaminants and other substances may occur in the fluids, e.g. water, water vapour and air, filling the pores of geomaterials as happens in waste disposal problems or durability problems. Mass transport also takes place in reservoir engineering problems, where the fluids involved are oil, water, and gas. All these aspects are addressed in this book together with a theoretical framework.
Download or read book Environmental Geomechanics written by Bernhard A. Schrefler and published by Springer. This book was released on 2014-05-04 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Geomechanics covers a broad class of problems where deforming geomaterials are involved, usually coupled with fluid flow and transport of some substance. Transport of contaminants and other substances may occur in the fluids, e.g. water, water vapour and air, filling the pores of geomaterials as happens in waste disposal problems or durability problems. Mass transport also takes place in reservoir engineering problems, where the fluids involved are oil, water, and gas. All these aspects are addressed in this book together with a theoretical framework.
Download or read book Deepwater Foundations and Pipeline Geomechanics written by William O. McCarron and published by J. Ross Publishing. This book was released on 2011-09-15 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practicing engineers in the offshore and reservoir engineering industry will find this timely volume filled with practical advice and expert information on current oil field development from oil exploration to production.
Download or read book Geomechanics in Soil Rock and Environmental Engineering written by John Small and published by CRC Press. This book was released on 2018-09-03 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Utilizes both Computer- and Hand-Based Calculations... Modern practice in geomechanics is becoming increasingly reliant on computer-based software, much of which can be obtained through the Internet. In Geomechanics in Soil, Rock, and Environmental Engineering the application of these numerical techniques is examined not only for soil mechanics, but also for rock mechanics and environmental applications. ... For Use in Complex Analysis It deals with the modern analysis of shallow foundations, deep foundations, retaining structures, and excavation and tunneling. In recent years, the environment has become more and more important, and so it also deals with municipal and mining waste and solutions for the disposal and containment of the waste. Many fresh solutions to problems are presented to enable more accurate and advanced designs to be carried out. A Practical Reference for Industry Professionals, This Illuminating Book: Offers a broad range of coverage in soil mechanics, rock mechanics, and environmental engineering Incorporates the author‘s more than 40 years of academic and practical design experience Describes the latest applications that have emerged in the last ten years Supplies references readily available online for futher research Geomechanics in Soil, Rock, and Environmental Engineering should appeal to students in their final undergraduate course in geomechanics or master’s students, and should also serve as a useful reference to practitioners in the field of geomechanics, reflecting the author’s background in both industry and academia.
Download or read book Introduction to Environmental Geotechnology written by Hsai-Yang Fang and published by CRC Press. This book was released on 2016-11-03 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of a bestseller presents updated technology advances that have occurred since publication of the first edition. It increases the utility and scope of the content through numerous case studies and examples and an entirely new set of problems and solutions. The book also has an accompanying instructor's guide and presents rubrics by which instructors can increase student learning and evaluate student outcomes, chapter by chapter. The book focuses on the increasing importance of water resources and energy in the broader context of environmental sustainability. It’s interdisciplinary coverage includes soil science, physical chemistry, mineralogy, geology, ground pollution, and more.
Download or read book Geomechanics in Soil Rock and Environmental Engineering written by John Small and published by CRC Press. This book was released on 2018-09-03 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Utilizes both Computer- and Hand-Based Calculations... Modern practice in geomechanics is becoming increasingly reliant on computer-based software, much of which can be obtained through the Internet. In Geomechanics in Soil, Rock, and Environmental Engineering the application of these numerical techniques is examined not only for soil mechanics, but also for rock mechanics and environmental applications. ... For Use in Complex Analysis It deals with the modern analysis of shallow foundations, deep foundations, retaining structures, and excavation and tunneling. In recent years, the environment has become more and more important, and so it also deals with municipal and mining waste and solutions for the disposal and containment of the waste. Many fresh solutions to problems are presented to enable more accurate and advanced designs to be carried out. A Practical Reference for Industry Professionals, This Illuminating Book: Offers a broad range of coverage in soil mechanics, rock mechanics, and environmental engineering Incorporates the author‘s more than 40 years of academic and practical design experience Describes the latest applications that have emerged in the last ten years Supplies references readily available online for futher research Geomechanics in Soil, Rock, and Environmental Engineering should appeal to students in their final undergraduate course in geomechanics or master’s students, and should also serve as a useful reference to practitioners in the field of geomechanics, reflecting the author’s background in both industry and academia.
Download or read book Recent Advances in Geo Environmental Engineering Geomechanics and Geotechnics and Geohazards written by Amjad Kallel and published by Springer. This book was released on 2018-12-31 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume contains the best papers in the geo-engineering field accepted for presentation at the 1st Springer Conference of the Arabian Journal of Geosciences, Tunisia 2018. In addition, it includes 3 keynotes by international experts on the following topics: 1. A new three-dimensional rock mass strength criterion 2. New tools and techniques of remote sensing for geologic hazard assessment 3. Land subsidence induced by the engineering-environmental effects in Shanghai China The book is useful for readers who would like to get a broad coverage in geo-engineering. It contains 11 chapters covering the following main areas: (a) Applications in geo-environmental engineering including soil remediation, (b) Characterization of geo-materials using geological, geotechnical and geophysical techniques, (c) Soil improvement applications, (d) Soil behaviour under dynamic loading, (e) Recent studies on expansive soils, (f) Analytical and numerical modelling of various geo-structures, (g) Slope stability, (h) Landslides, (i) Subsidence studies and (j) Recent studies on various other types of geo-hazards.
Download or read book Environmental Geotechnics written by Masashi Kamon and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coupled Phenomena in Environmental Geotechnics written by Mario Manassero and published by CRC Press. This book was released on 2013-05-30 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Geotechnics deals with a wide variety of applications, such as the characterization of polluted sites and landfill waste, the design of containment systems for subsoil pollutant control, radioactive waste disposal, geo-energy exploitation and bacteria-driven soil modification, among others. Reliable and effective predictions of the ac
Download or read book Geomechanics and Water Engineering in Environmental Management written by R.N. Chowdhury and published by Routledge. This book was released on 2017-11-22 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Divided into four parts, this work presents integrated studies and regional and case studies, and covers environmental constraints and effects, and the behaviour of earth masses.
Download or read book Innovative Numerical Modelling in Geomechanics written by Luis Ribeiro e Sousa and published by CRC Press. This book was released on 2012-05-03 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1990s five books onApplications of Computational Mechanics in Geotechnical Engineering have been published. Innovative Numerical Modelling in Geomechanics is the 6th and final book in this series, and contains papers written by leading experts on computational mechanics. The book treats highly relevant topics in the field of geotechnic
Download or read book Energy Geotechnics written by Alessio Ferrari and published by Springer. This book was released on 2018-08-23 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects selected full papers presented at the International Symposium on Energy Geotechnics 2018 (SEG-2018), held on 25th – 28th September 2018, at the Swiss Federal Institute of Technology in Lausanne (EPFL). It covers a wide range of topics in energy geotechnics, including energy geostructures, energy geostorage, thermo-hydro-chemo-mechanical behaviour of geomaterials, unconventional resources, hydraulic stimulation, induced seismicity, CO2 geological storage, and nuclear waste disposal as well as topics such as tower and offshore foundations. The book is intended for postgraduate students, researchers and practitioners working on geomechanics and geotechnical engineering for energy-related applications.
Download or read book Introductory Geotechnical Engineering written by Hsai-Yang Fang and published by CRC Press. This book was released on 2017-12-21 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating and blending traditional theory with particle-energy-field theory, this book provides a framework for the analysis of soil behaviour under varied environmental conditions. This book explains the why and how of geotechnical engineering in an environmental context. Using both SI and Imperial units, the authors cover: rock mechanics soil mechanics and hydrogeology soil properties and classifications and issues relating to contaminated land. Students of civil, geotechnical and environmental engineering and practitioners unfamiliar with the particle-energy-field concept, will find that this book's novel approach helps to clarify the complex theory behind geotechnics.
Download or read book Introduction to Environmental Geotechnology written by Hsai-Yang Fang and published by CRC Press. This book was released on 2016-11-03 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of a bestseller presents updated technology advances that have occurred since publication of the first edition. It increases the utility and scope of the content through numerous case studies and examples and an entirely new set of problems and solutions. The book also has an accompanying instructor's guide and presents rubrics by which instructors can increase student learning and evaluate student outcomes, chapter by chapter. The book focuses on the increasing importance of water resources and energy in the broader context of environmental sustainability. It’s interdisciplinary coverage includes soil science, physical chemistry, mineralogy, geology, ground pollution, and more.
Download or read book Challenges and Innovations in Geomechanics written by Marco Barla and published by Springer Nature. This book was released on 2021-01-14 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational geomechanics, as presented by international researchers and engineers at the 16th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG 2020/21). Contributions include a wide range of topics in geomechanics such as: monitoring and remote sensing, multiphase modelling, reliability and risk analysis, surface structures, deep structures, dams and earth structures, coastal engineering, mining engineering, earthquake and dynamics, soil-atmosphere interaction, ice mechanics, landfills and waste disposal, gas and petroleum engineering, geothermal energy, offshore technology, energy geostructures, geomechanical numerical models and computational rail geotechnics.
Download or read book Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2010-04-01 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interdisciplinary book encompasses the fields of rock mechanics, structural geology and petroleum engineering to address a wide range of geomechanical problems that arise during the exploitation of oil and gas reservoirs. It considers key practical issues such as prediction of pore pressure, estimation of hydrocarbon column heights and fault seal potential, determination of optimally stable well trajectories, casing set points and mud weights, changes in reservoir performance during depletion, and production-induced faulting and subsidence. The book establishes the basic principles involved before introducing practical measurement and experimental techniques to improve recovery and reduce exploitation costs. It illustrates their successful application through case studies taken from oil and gas fields around the world. This book is a practical reference for geoscientists and engineers in the petroleum and geothermal industries, and for research scientists interested in stress measurements and their application to problems of faulting and fluid flow in the crust.
