Download or read book Environmental Factors Influencing Stress Corrosion Cracking in Boiling Water Reactors written by John R. Weeks and published by . This book was released on 1983 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Environmental Factors Influencing Stress Corrosion Cracking in Boiling Water Reactors written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanisms of intergranular stress corrosion cracking (IGSCC) of sensitized stainless steels in boiling water reactor (BWR) primary coolant are reviewed, with emphasis on the role the environment plays on both the initiation and propagation processes. Environmental factors discussed include oxygen (corrosion potential), temperature, and dissolved ions in the water and the range of strain rates at which IGSCC occurs. Both crack propagation rates and the range of strain rates at which IGSCC occurs decrease rapidly as temperature is increased above approximately 200°C, in essentially the same manner as the solubility of magnetite decreases in acidic solutions. A mechanism of crack propagation is presented base on this observation. To establish water chemistry guidelines for crack-free operation of BWR's containing sensitized stainless steel, more information is needed on the role of absorption of impurities in the surface and deposited oxides and on the interaction between the oxygen and impurity levels required to maintain an electrochemical potential in a range where IGSCC is unlikely to occur. The relative effects of short bursts of impurities and longer term lower concentrations of these same impurities also need to be evaluated.

Download or read book Stress Corrosion Cracking written by V S Raja and published by Elsevier. This book was released on 2011-09-22 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of stress corrosion cracking (SCC), which causes sudden failure of metals and other materials subjected to stress in corrosive environment(s), has a significant impact on a number of sectors including the oil and gas industries and nuclear power production. Stress corrosion cracking reviews the fundamentals of the phenomenon as well as examining stress corrosion behaviour in specific materials and particular industries.The book is divided into four parts. Part one covers the mechanisms of SCC and hydrogen embrittlement, while the focus of part two is on methods of testing for SCC in metals. Chapters in part three each review the phenomenon with reference to a specific material, with a variety of metals, alloys and composites discussed, including steels, titanium alloys and polymer composites. In part four, the effect of SCC in various industries is examined, with chapters covering subjects such as aerospace engineering, nuclear reactors, utilities and pipelines.With its distinguished editors and international team of contributors, Stress corrosion cracking is an essential reference for engineers and designers working with metals, alloys and polymers, and will be an invaluable tool for any industries in which metallic components are exposed to tension, corrosive environments at ambient and high temperatures. - Examines the mechanisms of stress corrosion cracking (SCC) presenting recognising testing methods and materials resistant to SCC - Assesses the effect of SCC on particular metals featuring steel, stainless steel, nickel-based alloys, magnesium alloys, copper-based alloys and welds in steels - Reviews the monitoring and management of SCC and the affect of SCC in different industries such as petrochemical and aerospace

Download or read book Corrosion Issues in Light Water Reactors written by D Féron and published by Elsevier. This book was released on 2007-06-22 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stress corrosion cracking is a major problem in light water nuclear reactors, whether pressurised water reactors (PWRs) or boiling water reactors (BWRs). The nuclear industry needs to be able to predict the service life of these power plants and develop appropriate maintenance and repair practices to ensure safe long term operation. This important book sums up key recent research on corrosion in light water reactors and its practical applications.The book is divided into four parts. It begins with an overview of materials degradation due to stress corrosion, corrosion potential monitoring and passivation. Part two summarises research on susceptibility of materials to stress corrosion cracking and the ways it can be initiated. The third part of the book considers stress corrosion crack propagation processes whilst the final part includes practical case studies of corrosion in particular plants. The book reviews corrosion in a range of materials such as low alloy steels, stainless steels and nickel-based alloys.With its distinguished editor and team of contributors, Corrosion issues in light water reactors is a standard work for the nuclear industry. - Summarises key recent research on corrosion in light water reactors - Includes practical case studies

Download or read book Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors written by Gabriell Ilevbare and published by Springer. This book was released on 2017-07-17 with total page 2354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 15th Edition of the International Conference on Materials Degradation in Light Water Reactors focuses on subject areas critical to the safe and efficient running of nuclear reactor systems through the exchange and discussion of reseach results as well as field operating and management experience.

Download or read book Environmentally Assisted Cracking in Light Water Reactors written by and published by . This book was released on 1982 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Detecting Stress Corrosion Crack Initiating Conditions in Boiling Water Reactor Nuclear Power Plants written by David Jonathan Beard and published by . This book was released on 2004 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stress Corrosion Cracking in Light Water Reactors written by International Atomic Energy Agency and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides general descriptions of degradation mechanisms of different types of stress corrosion cracking (SCC) which are concerned with systems, structures and components in PWRs and BWRs. This publication includes examples of good practices in preventing, mitigating and repairing SCC damage and summarizes research and development programmes.

Download or read book Understanding and Mitigating Ageing in Nuclear Power Plants written by Philip G Tipping and published by Elsevier. This book was released on 2010-10-26 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant life management (PLiM) is a methodology focussed on the safety-first management of nuclear power plants over their entire lifetime. It incorporates and builds upon the usual periodic safety reviews and licence renewals as part of an overall framework designed to assist plant operators and regulators in assessing the operating conditions of a nuclear power plant, and establishing the technical and economic requirements for safe, long-term operation. Understanding and mitigating ageing in nuclear power plants critically reviews the fundamental ageing-degradation mechanisms of materials used in nuclear power plant structures, systems and components (SSC), along with their relevant analysis and mitigation paths, as well as reactor-type specific PLiM practices. Obsolescence and other less obvious ageing-related aspects in nuclear power plant operation are also examined in depth. Part one introduces the reader to the role of nuclear power in the global energy mix, and the importance and relevance of plant life management for the safety regulation and economics of nuclear power plants. Key ageing degradation mechanisms and their effects in nuclear power plant systems, structures and components are reviewed in part two, along with routes taken to characterise and analyse the ageing of materials and to mitigate or eliminate ageing degradation effects. Part three reviews analysis, monitoring and modelling techniques applicable to the study of nuclear power plant materials, as well as the application of advanced systems, structures and components in nuclear power plants. Finally, Part IV reviews the particular ageing degradation issues, plant designs, and application of plant life management (PLiM) practices in a range of commercial nuclear reactor types. With its distinguished international team of contributors, Understanding and mitigating ageing in nuclear power plants is a standard reference for all nuclear plant designers, operators, and nuclear safety and materials professionals and researchers. Introduces the reader to the role of nuclear power in the global energy mix Reviews the fundamental ageing-degradation mechanisms of materials used in nuclear power plant structures, systems and components (SSC) Examines topics including elimination of ageing effects, plant design, and the application of plant life management (PLiM) practices in a range of commercial nuclear reactor types

Download or read book Energy Research Abstracts written by and published by . This book was released on 1992 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Issues in Light Water Reactors written by D. Féron and published by . This book was released on 2007 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stress corrosion cracking is a major problem in light water nuclear reactors, whether pressurised water reactors (PWRs) or boiling water reactors (BWRs). The nuclear industry needs to be able to predict the service life of these power plants and develop appropriate maintenance and repair practices to ensure safe long term operation. This important book sums up key recent research on corrosion in light water reactors and its practical applications. The book is divided into four parts. It begins with an overview of materials degradation due to stress corrosion, corrosion potential monitoring and passivation. Part two summarises research on susceptibility of materials to stress corrosion cracking and the ways it can be initiated. The third part of the book considers stress corrosion crack propagation processes whilst the final part includes practical case studies of corrosion in particular plants. The book reviews corrosion in a range of materials such as low alloy steels, stainless steels and nickel-based alloys. With its distinguished editor and team of contributors, Corrosion issues in light water reactors is a standard work for the nuclear industry. Summarises key recent research on corrosion in light water reactorsIncludes practical case studies.

Download or read book Intergranular Stress Corrosion Cracking in Boiling Water Reactors written by Niagara Mohawk Power Corporation and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Corrosion Science and Engineering written by Damien Feron and published by Elsevier. This book was released on 2012-02-21 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of nuclear materials, i.e. the interaction between these materials and their environments, is a major issue for plant safety as well as for operation and economic competitiveness. Understanding these corrosion mechanisms, the systems and materials they affect, and the methods to accurately measure their incidence is of critical importance to the nuclear industry. Combining assessment techniques and analytical models into this understanding allows operators to predict the service life of corrosion-affected nuclear plant materials, and to apply the most appropriate maintenance and mitigation options to ensure safe long term operation.This book critically reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities. Initial sections introduce the complex field of nuclear corrosion science, with detailed chapters on the different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them. This is complemented by reviews of monitoring and control methodologies, as well as modelling and lifetime prediction approaches. Given that corrosion is an applied science, the final sections review corrosion issues across the range of current and next-generation nuclear reactors, and across such nuclear applications as fuel reprocessing facilities, radioactive waste storage and geological disposal systems.With its distinguished editor and international team of expert contributors, Nuclear corrosion science and engineering is an invaluable reference for nuclear metallurgists, materials scientists and engineers, as well as nuclear facility operators, regulators and consultants, and researchers and academics in this field. - Comprehensively reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities - Chapters assess different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them - Considers monitoring and control methodologies, as well as modelling and lifetime prediction approaches

Download or read book Proceedings of the Eighth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors written by and published by . This book was released on 1997 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the U S Nuclear Regulatory Commission Thirteenth Water Reactor Safety Research Information Meeting Held at National Bureau of Standards Gaithersburg Maryland October 22 25 1985 Materials engineering research Environmental effects in piping Surry steam generator written by and published by . This book was released on 1986 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: