Download or read book Economic Policy Instruments for Plastic Waste written by Magnus Hennlock and published by Nordic Council of Ministers. This book was released on 2015-03-18 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieving a high quality of waste plastic materials and recycling processes is a key challenge in closing the resource loops for plastics. This report reviews the status and trends for plastic waste flows and treatment in Denmark, Finland, Norway and Sweden. Furthermore, it gives an overview of existing policy instruments and the main challenges for designing policy instruments for improved recycling of plastic waste in these Nordic countries. The report identifies potential market failures associated with closing the resource loops for plastics. It reviews the economics research literature on policy instrument design for achieving optimal recycling rates and makes policy recommendations from the Nordic perspective. Finally, it presents results from a survey on market conditions to managers in the recycling and plastic manufacturing industry in Sweden.

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques

Download or read book Improving Markets for Recycled Plastics Trends Prospects and Policy Responses written by OECD and published by OECD Publishing. This book was released on 2018-05-24 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become one of the most prolific materials on the planet: in 2015 we produced about 380 million tonnes of plastics globally, up from 2 million tonnes in the 1950s. Yet today only 15% of this plastic waste is collected and recycled into secondary plastics globally each year. This ...

Download or read book Plastic Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. - Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement - Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation - Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches

Download or read book Global Plastics Outlook Economic Drivers Environmental Impacts and Policy Options written by OECD and published by OECD Publishing. This book was released on 2022-02-22 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: While plastics are extremely useful materials for modern society, plastics production and waste generation continue to increase with worsening environmental impacts despite international, national and local policy responses, as well as industry commitments. The first of two reports, this Outlook intends to inform and support policy efforts to combat plastic leakage.

Download or read book Handbook of Recycling written by Ernst Worrell and published by Newnes. This book was released on 2014-04-28 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the International Solid Waste Association's 2014 Publication Award, Handbook of Recycling is an authoritative review of the current state-of-the-art of recycling, reuse and reclamation processes commonly implemented today and how they interact with one another. The book addresses several material flows, including iron, steel, aluminum and other metals, pulp and paper, plastics, glass, construction materials, industrial by-products, and more. It also details various recycling technologies as well as recovery and collection techniques. To completely round out the picture of recycling, the book considers policy and economic implications, including the impact of recycling on energy use, sustainable development, and the environment. With contemporary recycling literature scattered across disparate, unconnected articles, this book is a crucial aid to students and researchers in a range of disciplines, from materials and environmental science to public policy studies. - Portrays recent and emerging technologies in metal recycling, by-product utilization and management of post-consumer waste - Uses life cycle analysis to show how to reclaim valuable resources from mineral and metallurgical wastes - Uses examples from current professional and industrial practice, with policy and economic implications

Download or read book Extrusion of Polymers written by Chan I. Chung and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2019-10-07 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author presents single-screw extrusion technology together with the relevant polymer fundamentals, with an emphasis on screw design. The presentation begins on a physical level, providing an in-depth conceptual understanding, followed by an analytical level with mathematical models. Practical applications of the mathematical models are illustrated by numerous examples. A brief description of twin-screw extrusion technology is also presented. New in the third edition: a novel patented barrier screw design that eliminates shortcomings of all previous barrier screw designs, more descriptive specific screw design guidelines, a scientifically designed pineapple mixing section, and general improvements and corrections. Contents: • Physical Description of Single-Screw Extrusion • Fundamentals of Polymers and Melt Rheology • Theories of Single-Screw Extrusion and Scale-Up • Screw Design and High Performance Screws • Gear Pumps, Static Mixers, and Dynamic Mixers • Die Design • Viscoelastic Effects in Melt Flow • Special Single-Screw Extruder with Channeled Barrel • Physical Description of Twin-Screw Extruders

Download or read book Life Cycle Impact Assessment written by Michael Z. Hauschild and published by Springer. This book was released on 2015-03-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a detailed presentation of the principles and practice of life cycle impact assessment. As a volume of the LCA compendium, the book is structured according to the LCIA framework developed by the International Organisation for Standardisation (ISO)passing through the phases of definition or selection of impact categories, category indicators and characterisation models (Classification): calculation of category indicator results (Characterisation); calculating the magnitude of category indicator results relative to reference information (Normalisation); and converting indicator results of different impact categories by using numerical factors based on value-choices (Weighting). Chapter one offers a historical overview of the development of life cycle impact assessment and presents the boundary conditions and the general principles and constraints of characterisation modelling in LCA. The second chapter outlines the considerations underlying the selection of impact categories and the classification or assignment of inventory flows into these categories. Chapters three through thirteen exploreall the impact categories that are commonly included in LCIA, discussing the characteristics of each followed by a review of midpoint and endpoint characterisation methods, metrics, uncertainties and new developments, and a discussion of research needs. Chapter-length treatment is accorded to Climate Change; Stratospheric Ozone Depletion; Human Toxicity; Particulate Matter Formation; Photochemical Ozone Formation; Ecotoxicity; Acidification; Eutrophication; Land Use; Water Use; and Abiotic Resource Use. The final two chapters map out the optional LCIA steps of Normalisation and Weighting.

Download or read book Reckoning with the U S Role in Global Ocean Plastic Waste written by National Academies of Sciences, Engineering, and Medicine and published by . This book was released on 2022-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: An estimated 8 million metric tons (MMT) of plastic waste enters the world's ocean each year - the equivalent of dumping a garbage truck of plastic waste into the ocean every minute. Plastic waste is now found in almost every marine habitat, from the ocean surface to deep sea sediments to the ocean's vast mid-water region, as well as the Great Lakes. This report responds to a request in the bipartisan Save Our Seas 2.0 Act for a scientific synthesis of the role of the United States both in contributing to and responding to global ocean plastic waste. The United States is a major producer of plastics and in 2016, generated more plastic waste by weight and per capita than any other nation. Although the U.S. solid waste management system is advanced, it is not sufficient to deter leakage into the environment. Reckoning with the U.S. Role in Global Ocean Plastic Waste calls for a national strategy by the end of 2022 to reduce the nation's contribution to global ocean plastic waste at every step - from production to its entry into the environment - including by substantially reducing U.S. solid waste generation. This report also recommends a nationally-coordinated and expanded monitoring system to track plastic pollution in order to understand the scales and sources of U.S. plastic waste, set reduction and management priorities, and measure progress.

Download or read book Plastic Waste for Sustainable Asphalt Roads written by Filippo Giustozzi and published by Woodhead Publishing. This book was released on 2022-01-13 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste polymers have been studied for various applications such as energy generation and biochemical production; however, their application in asphalt roads still poses some questions. Over the last decade, several studies have reported the utilization of waste plastics in roads using different methodologies and raw materials, but there is still significant inconsistency around this topic. What is the right methodology to recycle waste plastics for road applications? What is the correct type of waste plastics to be used in road applications? What environmental concerns could arise from the use of waste plastics in road applications? Plastic Waste for Sustainable Asphalt Roads covers the various processes and techniques for the utilization of waste plastics in asphalt mixes. The book discusses the various material properties and methodologies, effects of various methodologies, and combination of various polymers. It also provides information on the compatibility between bitumen and plastics, final asphalt performance, and environmental challenges. - Discusses the processes and techniques for utilization of waste plastics in asphalt mixes. - Features a life-cycle assessment of waste plastics in road surfaces and possible Environmental Product Declarations (EPD). - Includes examples of on-field usage through various case studies.

Download or read book Integrated Solid Waste Management A Lifecycle Inventory written by P.R. White and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life is often considered to be a journey. The lifecycle of waste can similarly be considered to be a journey from the cradle (when an item becomes valueless and, usually, is placed in the dustbin) to the grave (when value is restored by creating usable material or energy; or the waste is transformed into emissions to water or air, or into inert material placed in a landfill). This preface provides a route map for the journey the reader of this book will undertake. Who? Who are the intended readers of this book? Waste managers (whether in public service or private companies) will find a holistic approach for improving the environmental quality and the economic cost of managing waste. The book contains general principles based on cutting edge experience being developed across Europe. Detailed data and a computer model will enable operations managers to develop data-based improvements to their systems. Producers oj waste will be better able to understand how their actions can influence the operation of environmentally improved waste management systems. Designers oj products and packages will be better able to understand how their design criteria can improve the compatibility of their product or package with developing, environmentally improved waste management systems. Waste data specialists (whether in laboratories, consultancies or environ mental managers of waste facilities) will see how the scope, quantity and quality of their data can be improved to help their colleagues design more effective waste management systems.

Download or read book Plastics in the Environment written by Alessio Gomiero and published by BoD – Books on Demand. This book was released on 2019-05-15 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics in the Environment is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of plastic pollution and how it is affecting the environment. The book comprises single chapters authored by various researchers and edited by an expert active in the research area. All chapters are complete in themselves but united under a common research study topic. This publication aims at providing a thorough overview of the latest research efforts by international authors on the trending topic of plastics in the environment and opens new possible research paths for further novel developments.

Download or read book Environmental Assessment of Recycled Waste written by Subramanian Senthilkannan Muthu and published by Springer Nature. This book was released on 2023-01-01 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book with its six interesting chapters highlights the environmental assessment of recycled waste. Waste Management is one of the main topics of concern for an organization and a nation. Out of different destinations at the end of life for a product, Recycling is the need of the hour and is an inevitable destination. Literally all wastes (be it- postindustrial or post-consumer states) if they cannot be reused, have to be recycled. Recycled products are in demand today and we are seeing many recycled alternatives for almost all industrial sectors. One of the million-dollar question to answer in terms of recycling and recycled products is- whether the recycled products are environmentally sustainable than the virgin alternatives? It is highly imperative to ascertain the environmental footprints of recycled products and recycling processes and also find out the best possible ways to further improve the environmental benefits of such recycled products and recycling processes.

Download or read book Municipal Solid Waste Management in Asia and the Pacific Islands written by Agamuthu Pariatamby and published by Springer Science & Business Media. This book was released on 2013-09-05 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid waste management issues, technologies and challenges are dynamic. More so, in developing and transitory nations in Asia. This book, written by Asian experts in solid waste management, explores the current situation in Asian countries including Pacific Islands. There are not many technical books of this kind, especially dedicated to this region of the world. The chapters form a comprehensive, coherent investigation in municipal solid waste (MSW) management, including, definitions used, generation, sustainable waste management system, legal framework and impacts on global warming. Several case studies from Asian nations are included to exemplify the real situation experienced. Discussions on MSW policy in these countries and their impacts on waste management and minimization (if any) are indeed an eye-opener. Undoubtedly, this book would be a pioneer in revealing the latest situation in the Asian region, which includes two of the world’s most dynamic nations in the economic growth. It is greatly envisaged to form an excellent source of reference in MSW management in Asia and Pacific Islands. This book will bridge the wide gap in available information between the developed and transitory/developing nations.

Download or read book Recycled Plastic Biocomposites written by Md Rezaur Rahman and published by Woodhead Publishing. This book was released on 2022-01-24 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycled plastic biocomposites have attracted widespread attention from both researchers and manufacturers due to the significant improvements in their physico-mechanical, thermal, rheological, and barrier properties when compared to conventional materials, as well as their potential regarding commercialization and zero waste. Recycled Plastic Biocomposites presents the latest information on recycled polymers, textiles, pulp and paper, wood plastic, rubber waste plastic, and micro and nano effects of recycled plastic waste resources that have great potential as reinforcement materials in composites because they are non-toxic, inexpensive, biodegradable, cost-effective, and available in large amounts. Recycled plastic biocomposites are now starting to be deployed in a broad range of materials applications due to their advantages over petroleum-based materials. Currently, there are no limits to the possibility of their applications. They also have exceptional sustainable and biodegradable properties when compared to conventional materials such as polymers and composites. Recycled Plastic Biocomposites reviews the latest research advances on recycled plastic-based biocomposites, including thermoplastic, thermoset, rubber, and foams. In addition, the book covers critical assessments on the economics of recycled plastic, including a cost-performance analysis that discusses its strengths and weaknesses as a reinforcement material. The huge potential applications of recycled plastic in industry are also explored in detail with respect to low cost, recyclable and biodegradable properties, and the way they can be applied to the automotive, construction, and packaging industries. The life cycles of both single and hybrid recycled plastic-based polymer composites and biocomposites are also discussed in detail. From the viewpoint of recycled plastic-based polymer composites, the book covers not only the well-known role of recycled polymers and composites, but also advanced materials produced from micro-, nano-, and pico-scale fillers that achieve better physical, mechanical, morphological, and thermal properties. This book will be an essential reference resource for academic and industrial researchers, materials scientists, and those working in polymer science and engineering, chemical engineering, manufacturing, and biocomposites. - Places an emphasis on micro-, nano-, and pico-scale fillers that significantly improve properties. - Discusses the most suitable fabrication methods, properties, and applications. - Features critical assessments on the economics of recycled plastic, including a cost-performance analysis that reviews its strengths and weaknesses as a reinforcement material.

Download or read book Resource and Environmental Economics Modern Issues and Applications written by and published by World Scientific. This book was released on 2009 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This important book deals with the essential principles of resource and environmental economics, provides applications to contemporary issues in this field, and outlines and assesses policies being used or proposed for managing the use of environmental and natural resources. Covering specific contemporary topics such as agriculture and the environment, water use, greenhouse gas management, biodiversity conservation, tourism and the environment, and environmental economics and health, leading issues in resource and environmental economics are outlined and analyzed in an innovative manner. Institutional economics (both new and traditional) is applied and compared with other approaches such as neoclassical economics, behavioral economics and the Austrian School of Economics. This heterogeneous, multi-perspective approach enables problems to be considered from several different angles, thus enhancing the reader's comprehension of the subject matter. Furthermore, using minimal technical jargon, the book takes into account aspects of modern economic analysis such as the costs of and constraints on decision-making and the transaction costs involved in policy implementation."-

Download or read book The Dictionary of Modern Economics written by D. W. Pearce and published by Springer. This book was released on 1983-07-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: