Download or read book Entropy Generation Availability Energy Loss Analysis Inside Mit Gas Spring and two Space Test Rigs written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-31 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: The results of the entropy generation and availability energy loss analysis under conditions of oscillating pressure and oscillating helium gas flow in two Massachusetts Institute of Technology (MIT) test rigs piston-cylinder and piston-cylinder-heat exchanger are presented. Two solution domains, the gas spring (single-space) in the piston-cylinder test rig and the gas spring + heat exchanger (two-space) in the piston-cylinder-heat exchanger test rig are of interest. Sage and CFD-ACE+ commercial numerical codes are used to obtain 1-D and 2-D computer models, respectively, of each of the two solution domains and to simulate the oscillating gas flow and heat transfer effects in these domains. Second law analysis is used to characterize the entropy generation and availability energy losses inside the two solution domains. Internal and external entropy generation and availability energy loss results predicted by Sage and CFD-ACE+ are compared. Thermodynamic loss analysis of simple systems such as the MIT test rigs are often useful to understand some important features of complex pattern forming processes in more complex systems like the Stirling engine. This study is aimed at improving numerical codes for the prediction of thermodynamic losses via the development of a loss post-processor. The incorporation of loss post-processors in Stirling engine numerical codes will facilitate Stirling engine performance optimization. Loss analysis using entropy-generation rates due to heat and fluid flow is a relatively new technique for assessing component performance. It offers a deep insight into the flow phenomena, allows a more exact calculation of losses than is possible with traditional means involving the application of loss correlations and provides an effective tool for improving component and overall system performance.Ebiana, Asuquo B. and Savadekar, Rupesh T. and Patel, Kaushal V.Glenn Research CenterCOMPUTATIONAL FLUID DYNAMICS; ENERGY DISSIPATION; ENTROPY; GAS FLOW; S

Download or read book Entropy Generation Availability Energy Loss Analysis Inside Mit Gas Spring and Two Space Test Rigs written by Nasa Technical Reports Server (Ntrs) and published by BiblioGov. This book was released on 2013-06 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: The results of the entropy generation and availability energy loss analysis under conditions of oscillating pressure and oscillating helium gas flow in two Massachusetts Institute of Technology (MIT) test rigs piston-cylinder and piston-cylinder-heat exchanger are presented. Two solution domains, the gas spring (single-space) in the piston-cylinder test rig and the gas spring ] heat exchanger (two-space) in the piston-cylinder-heat exchanger test rig are of interest. Sage and CFD-ACE+ commercial numerical codes are used to obtain 1-D and 2-D computer models, respectively, of each of the two solution domains and to simulate the oscillating gas flow and heat transfer effects in these domains. Second law analysis is used to characterize the entropy generation and availability energy losses inside the two solution domains. Internal and external entropy generation and availability energy loss results predicted by Sage and CFD-ACE+ are compared. Thermodynamic loss analysis of simple systems such as the MIT test rigs are often useful to understand some important features of complex pattern forming processes in more complex systems like the Stirling engine. This study is aimed at improving numerical codes for the prediction of thermodynamic losses via the development of a loss post-processor. The incorporation of loss post-processors in Stirling engine numerical codes will facilitate Stirling engine performance optimization. Loss analysis using entropy-generation rates due to heat and fluid flow is a relatively new technique for assessing component performance. It offers a deep insight into the flow phenomena, allows a more exact calculation of losses than is possible with traditional means involving the application of loss correlations and provides an effective tool for improving component and overall system performance.

Download or read book Space Technology and Applications International Forum STAIF 2005 written by Mohamed S. El-Genk and published by American Institute of Physics. This book was released on 2005-03-03 with total page 1512 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3rd Symposium on Space Colonization. 2nd Symposium on New Frontiers and Future Concepts, Albuquerque, New Mexico, 13-17 February 2005

Download or read book Proceedings of the 25th Intersociety Energy Conversion Engineering Conference written by and published by . This book was released on 1990 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 25th Intersociety Energy Conversion Engineering Conference Renewable resource systems stirling engines and systems and cycles written by Intersociety Energy Conversion Engineering Conference and published by . This book was released on 1990 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The UNIX haters Handbook written by Simson Garfinkel and published by John Wiley & Sons Incorporated. This book was released on 1994 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for all people who are forced to use UNIX. It is a humorous book--pure entertainment--that maintains that UNIX is a computer virus with a user interface. It features letters from the thousands posted on the Internet's "UNIX-Haters" mailing list. It is not a computer handbook, tutorial, or reference. It is a self-help book that will let readers know they are not alone.

Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems

Download or read book Optical Properties of Solids written by Frederick Wooten and published by Academic Press. This book was released on 2013-10-22 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Properties of Solids covers the important concepts of intrinsic optical properties and photoelectric emission. The book starts by providing an introduction to the fundamental optical spectra of solids. The text then discusses Maxwell's equations and the dielectric function; absorption and dispersion; and the theory of free-electron metals. The quantum mechanical theory of direct and indirect transitions between bands; the applications of dispersion relations; and the derivation of an expression for the dielectric function in the self-consistent field approximation are also encompassed. The book further tackles current-current correlations; the fluctuation-dissipation theorem; and the effect of surface plasmons on optical properties and photoemission. People involved in the study of the optical properties of solids will find the book invaluable.

Download or read book Bulletin of the Atomic Scientists written by and published by . This book was released on 1972-10 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bulletin of the Atomic Scientists is the premier public resource on scientific and technological developments that impact global security. Founded by Manhattan Project Scientists, the Bulletin's iconic "Doomsday Clock" stimulates solutions for a safer world.

Download or read book Renewable and Efficient Electric Power Systems written by Gilbert M. Masters and published by John Wiley & Sons. This book was released on 2005-01-03 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive textbook for the new trend of distributed power generation systems and renewable energy sources in electric power systems. It covers the complete range of topics from fundamental concepts to major technologies as well as advanced topics for power consumers. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department -- to obtain the manual, send an email to [email protected]

Download or read book Biomolecular Feedback Systems written by Domitilla Del Vecchio and published by Princeton University Press. This book was released on 2014-10-26 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an accessible introduction to the principles and tools for modeling, analyzing, and synthesizing biomolecular systems. It begins with modeling tools such as reaction-rate equations, reduced-order models, stochastic models, and specific models of important core processes. It then describes in detail the control and dynamical systems tools used to analyze these models. These include tools for analyzing stability of equilibria, limit cycles, robustness, and parameter uncertainty. Modeling and analysis techniques are then applied to design examples from both natural systems and synthetic biomolecular circuits. In addition, this comprehensive book addresses the problem of modular composition of synthetic circuits, the tools for analyzing the extent of modularity, and the design techniques for ensuring modular behavior. It also looks at design trade-offs, focusing on perturbations due to noise and competition for shared cellular resources. Featuring numerous exercises and illustrations throughout, Biomolecular Feedback Systems is the ideal textbook for advanced undergraduates and graduate students. For researchers, it can also serve as a self-contained reference on the feedback control techniques that can be applied to biomolecular systems. Provides a user-friendly introduction to essential concepts, tools, and applications Covers the most commonly used modeling methods Addresses the modular design problem for biomolecular systems Uses design examples from both natural systems and synthetic circuits Solutions manual (available only to professors at press.princeton.edu) An online illustration package is available to professors at press.princeton.edu

Download or read book Effects of Surface Chemistry on Hot Corrosion Life written by and published by . This book was released on 1985 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainability Assessment of Urban Systems written by Claudia R. Binder and published by Cambridge University Press. This book was released on 2020-03-26 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our world is becoming more urban. More than fifty percent of the global population now lives in cities, which poses new challenges for sustainable development. This book integrates theory and methods of sustainability assessment with concepts from systems science to provide guidelines for assessing the sustainability of urban systems. It discusses different aspects of urban sustainability, from energy and housing, to mobility and health, covering social, economic and environmental factors, as well as the various stakeholders and actors involved. The book argues for the need to find models and solutions in order to design sustainable cities of the future in light of the complexity of urban social life. Including diverse case studies from the developed and developing world, this book provides a useful reference for researchers and students from a broad range of disciplines working in the field of sustainability, as well as for environmental consultants and policy makers.

Download or read book The Production of Space written by Henri Lefebvre and published by Wiley-Blackwell. This book was released on 1992-04-08 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Henri Lefebvre has considerable claims to be the greatest living philosopher. His work spans some sixty years and includes original work on a diverse range of subjects, from dialectical materialism to architecture, urbanism and the experience of everyday life. The Production of Space is his major philosophical work and its translation has been long awaited by scholars in many different fields. The book is a search for a reconciliation between mental space (the space of the philosophers) and real space (the physical and social spheres in which we all live). In the course of his exploration, Henri Lefebvre moves from metaphysical and ideological considerations of the meaning of space to its experience in the everyday life of home and city. He seeks, in other words, to bridge the gap between the realms of theory and practice, between the mental and the social, and between philosophy and reality. In doing so, he ranges through art, literature, architecture and economics, and further provides a powerful antidote to the sterile and obfuscatory methods and theories characteristic of much recent continental philosophy. This is a work of great vision and incisiveness. It is also characterized by its author's wit and by anecdote, as well as by a deftness of style which Donald Nicholson-Smith's sensitive translation precisely captures.

Download or read book Thermal Energy Storage for Sustainable Energy Consumption written by Halime Ö. Paksoy and published by Springer Science & Business Media. This book was released on 2007-03-16 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Çukurova University, Turkey in collaboration with Ljubljana University, Slovenia and the International Energy Agency Implementing Agreement on Energy Conservation Through Energy Storage (IEA ECES IA) organized a NATO Advanced Study Institute on Thermal Energy Storage for Sustainable Energy Consumption – Fundamentals, Case Studies and Design (NATO ASI TESSEC), in Cesme, Izmir, Turkey in June, 2005. This book contains manuscripts based on the lectures included in the scientific programme of the NATO ASI TESSEC.

Download or read book Monitoring for Gaseous Pollutants in Museum Environments written by Cecily M. Grzywacz and published by Getty Publications. This book was released on 2006-09-01 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an emphasis on passive sampling, this volume focuses on the environmental monitoring for common gaseous pollutants. It offers an overview of the history and nature of pollutants of concern to museums and the challenges facing scientists, conservators, and managers seeking to develop target pollutant guidelines to protect cultural property.

Download or read book Fluid Mechanics Thermodynamics of Turbomachinery written by Sydney Lawrence Dixon and published by Pergamon. This book was released on 1978 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and updated, this well established and highly successful book gives a competent account of the fundamental theory of turbomachines. A concise and unified approach to the subject is employed which fills the need for a comprehensive introductory text suitable for most engineering curricula. The theoretical approach, based firmly on the fundamental principles of thermodynamics and fluid mechanics, makes the book particularly suitable for undergraduate courses. It has also proved very useful to professional engineers who require a relevant text on the basic physical processes in turbomachines and their theoretical representation. Several modifications have been incorporated in the text in the light of recent advances in the subject. Further information on cavitation has been included and a new section on the optimum design of a pump inlet taking account of cavitation limitations has been added. Certain chapters have been extended: the section on 'Constant specific mass flow' design now includes the flow equations for a following rotor row, and the section on the definition of blade shapes has been extended to include the parabolic arc camber line blade. A list of symbols used in the text has been added. Each chapter contains a selection of useful problems and answers are provided at the end of the book. SI/Metric units are used throughout