Download or read book Network Warrior written by Gary A. Donahue and published by "O'Reilly Media, Inc.". This book was released on 2011-05-13 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pick up where certification exams leave off. With this practical, in-depth guide to the entire network infrastructure, you’ll learn how to deal with real Cisco networks, rather than the hypothetical situations presented on exams like the CCNA. Network Warrior takes you step by step through the world of routers, switches, firewalls, and other technologies based on the author's extensive field experience. You'll find new content for MPLS, IPv6, VoIP, and wireless in this completely revised second edition, along with examples of Cisco Nexus 5000 and 7000 switches throughout. Topics include: An in-depth view of routers and routing Switching, using Cisco Catalyst and Nexus switches as examples SOHO VoIP and SOHO wireless access point design and configuration Introduction to IPv6 with configuration examples Telecom technologies in the data-networking world, including T1, DS3, frame relay, and MPLS Security, firewall theory, and configuration, as well as ACL and authentication Quality of Service (QoS), with an emphasis on low-latency queuing (LLQ) IP address allocation, Network Time Protocol (NTP), and device failures

Download or read book Enterprise Network Engineering written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Enterprise Network Engineering written by Michael Corke and published by . This book was released on 1994 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Practical Introduction to Enterprise Network and Security Management written by Bongsik Shin and published by CRC Press. This book was released on 2021-07-21 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Introduction to Enterprise Network and Security Management, Second Edition, provides a balanced understanding of introductory and advanced subjects in both computer networking and cybersecurity. Although much of the focus is on technical concepts, managerial issues related to enterprise network and security planning and design are explained from a practitioner’s perspective. Because of the critical importance of cybersecurity in today’s enterprise networks, security-related issues are explained throughout the book, and four chapters are dedicated to fundamental knowledge. Challenging concepts are explained so readers can follow through with careful reading. This book is written for those who are self-studying or studying information systems or computer science in a classroom setting. If used for a course, it has enough material for a semester or a quarter. FEATURES Provides both theoretical and practical hands-on knowledge and learning experiences for computer networking and cybersecurity Offers a solid knowledge base for those preparing for certificate tests, such as CompTIA and CISSP Takes advantage of actual cases, examples, industry products, and services so students can relate concepts and theories to practice Explains subjects in a systematic and practical manner to facilitate understanding Includes practical exercise questions that can be individual or group assignments within or without a classroom Contains several information-rich screenshots, figures, and tables carefully constructed to solidify concepts and enhance visual learning The text is designed for students studying information systems or computer science for the first time. As a textbook, this book includes hands-on assignments based on the Packet Tracer program, an excellent network design and simulation tool from Cisco. Instructor materials also are provided, including PowerPoint slides, solutions for exercise questions, and additional chapter questions from which to build tests.

Download or read book Enterprise Network Testing written by Andy Sholomon and published by Pearson Education. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enterprise Network Testing Testing Throughout the Network Lifecycle to Maximize Availability and Performance Andy Sholomon, CCIE® No. 15179 Tom Kunath, CCIE No. 1679 The complete guide to using testing to reduce risk and downtime in advanced enterprise networks Testing has become crucial to meeting enterprise expectations of near-zero network downtime. Enterprise Network Testing is the first comprehensive guide to all facets of enterprise network testing. Cisco enterprise consultants Andy Sholomon and Tom Kunath offer a complete blueprint and best-practice methodologies for testing any new network system, product, solution, or advanced technology. Sholomon and Kunath begin by explaining why it is important to test and how network professionals can leverage structured system testing to meet specific business goals. Then, drawing on their extensive experience with enterprise clients, they present several detailed case studies. Through real-world examples, you learn how to test architectural "proofs of concept," specific network features, network readiness for use, migration processes, security, and more. Enterprise Network Testing contains easy-to-adapt reference test plans for branches, WANs/MANs, data centers, and campuses. The authors also offer specific guidance on testing many key network technologies, including MPLS/VPN, QoS, VoIP, video, IPsec VPNs, advanced routing (OSPF, EIGRP, BGP), and Data Center Fabrics. § Understand why, when, and how you should test your network § Use testing to discover critical network design flaws § Incorporate structured systems testing into enterprise architecture strategy § Utilize testing to improve decision-making throughout the network lifecycle § Develop an effective testing organization and lab facility § Choose and use test services providers § Scope, plan, and manage network test assignments § nLeverage the best commercial, free, and IOS test tools § Successfully execute test plans, including crucial low-level details § Minimize the equipment required to test large-scale networks § Identify gaps in network readiness § Validate and refine device configurations § Certify new hardware, operating systems, and software features § Test data center performance and scalability § Leverage test labs for hands-on technology training This book is part of the Networking Technology Series from Cisco Press®, which offers networking professionals valuable information for constructing efficient networks, understanding new technologies, and building successful careers.

Download or read book CCNP Enterprise Certification Study Guide Implementing and Operating Cisco Enterprise Network Core Technologies written by Ben Piper and published by John Wiley & Sons. This book was released on 2020-04-20 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: The practical and conceptual knowledge you need to attain CCNP Enterprise certification From one of the most trusted study guide publishers comes CCNP Enterprise Certification Study Guide: Exam 350-401. This guide helps you develop practical knowledge and best practices for critical aspects of enterprise infrastructure so you can gain your CCNP Enterprise certification. If you’re hoping to attain a broader range of skills and a solid understanding of Cisco technology, this guide will also provide fundamental concepts for learning how to implement and operate Cisco enterprise network core technologies. By focusing on real-world skills, each chapter prepares you with the knowledge you need to excel in your current role and beyond. It covers emerging and industry-specific topics, such as SD-WAN, network design, wireless, and automation. This practical guide also includes lessons on: ● Automation ● Network assurance ● Security ● Enterprise infrastructure ● Dual-stack architecture ● Virtualization In addition to helping you gain enterprise knowledge, this study guidecan lead you toward your Cisco specialist certification. When you purchase this guide, you get access to the information you need to prepare yourself for advances in technology and new applications, as well as online study tools such as: ● Bonus practice exams ● Pre-made flashcards ● Glossary of key terms ● Specific focus areas Expand your skillset and take your career to the next level with CCNP Enterprise Certification Study Guide.

Download or read book Enterprise Networking Multilayer Switching and Applications written by Serpanos, Dimitrios N. and published by IGI Global. This book was released on 2001-07-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enterprise Networking: Multilayer Switching and Applications offers up to date information relevant for the design of modem corporate networks and for the evaluation of new networking equipment. The book describes the architectures, standards high-availability and network policies that are requirements of modern switched networks.

Download or read book Integrated Process Framework for Network Engineering Network Operations and Enterprise Network Management written by William J. Baumann and published by . This book was released on 2000 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CCNA Data Center Introducing Cisco Data Center Networking Study Guide written by Todd Lammle and published by John Wiley & Sons. This book was released on 2013-06-05 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cisco has announced big changes to its certification program. As of February 24, 2020, all current certifications will be retired, and Cisco will begin offering new certification programs. The good news is if you’re working toward any current CCNA certification, keep going. You have until February 24, 2020 to complete your current CCNA. If you already have CCENT/ICND1 certification and would like to earn CCNA, you have until February 23, 2020 to complete your CCNA certification in the current program. Likewise, if you’re thinking of completing the current CCENT/ICND1, ICND2, or CCNA Routing and Switching certification, you can still complete them between now and February 23, 2020. A must-have study guide for exam 640-911 on Cisco's Unified Data Center The Cisco Certified Network Associate Data Center certification is Cisco's newest certification, covering the Cisco Unified Data Center technologies. Written by unparalleled author and Cisco authority Todd Lammle, and CCIE John Swartz, this comprehensive study guide is essential reading for anyone preparing to take the 640-911 exam (Introducing Cisco Data Center Networking), providing in-depth coverage of all the exam's objectives. In addition, it offers expanded coverage on key topics reflected on the exam. Addresses understanding basic networking and ethernet technologies Reviews the OSI and DoD model and TCP/IP Transport Layer Covers basic IP routing technologies, layer 2 switching technologies, and routing principles Provides an introduction to Nexus switch as well as how to configure it CCNA Data Center Study Guide offers you access to additional study tools, including bonus practice exams, electronic flashcards, a searchable PDF of a glossary of terms. Plus, you will be able to use the free nexus simulator to perform all the hands-on labs in the book.

Download or read book Linux for Networking Professionals written by Rob VandenBrink and published by Packt Publishing Ltd. This book was released on 2021-11-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get to grips with the most common as well as complex Linux networking configurations, tools, and services to enhance your professional skills Key FeaturesLearn how to solve critical networking problems using real-world examplesConfigure common networking services step by step in an enterprise environmentDiscover how to build infrastructure with an eye toward defense against common attacksBook Description As Linux continues to gain prominence, there has been a rise in network services being deployed on Linux for cost and flexibility reasons. If you are a networking professional or an infrastructure engineer involved with networks, extensive knowledge of Linux networking is a must. This book will guide you in building a strong foundation of Linux networking concepts. The book begins by covering various major distributions, how to pick the right distro, and basic Linux network configurations. You'll then move on to Linux network diagnostics, setting up a Linux firewall, and using Linux as a host for network services. You'll discover a wide range of network services, why they're important, and how to configure them in an enterprise environment. Finally, as you work with the example builds in this Linux book, you'll learn to configure various services to defend against common attacks. As you advance to the final chapters, you'll be well on your way towards building the underpinnings for an all-Linux datacenter. By the end of this book, you'll be able to not only configure common Linux network services confidently, but also use tried-and-tested methodologies for future Linux installations. What you will learnUse Linux as a troubleshooting and diagnostics platformExplore Linux-based network servicesConfigure a Linux firewall and set it up for network servicesDeploy and configure Domain Name System (DNS) and Dynamic Host Configuration Protocol (DHCP) services securelyConfigure Linux for load balancing, authentication, and authorization servicesUse Linux as a logging platform for network monitoringDeploy and configure Intrusion Prevention Services (IPS)Set up Honeypot solutions to detect and foil attacksWho this book is for This book is for IT and Windows professionals and admins looking for guidance in managing Linux-based networks. Basic knowledge of networking is necessary to get started with this book.

Download or read book Enterprise Networking Security and Automation Companion Guide CCNAv7 written by Cisco Networking Academy and published by Cisco Press. This book was released on 2020-07-08 with total page 1502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enterprise Networking, Security, and Automation Companion Guide is the official supplemental textbook for the Enterprise Networking, Security, and Automation v7 course in the Cisco Networking Academy CCNA curriculum. This course describes the architectures and considerations related to designing, securing, operating, and troubleshooting enterprise networks. You will implement the OSPF dynamic routing protocol, identify and protect against cybersecurity threats, configure access control lists (ACLs), implement Network Address Translation (NAT), and learn about WANs and IPsec VPNs. You will also learn about QoS mechanisms, network management tools, network virtualization, and network automation. The Companion Guide is designed as a portable desk reference to use anytime, anywhere to reinforce the material from the course and organize your time. The book's features help you focus on important concepts to succeed in this course: * Chapter objectives: Review core concepts by answering the focus questions listed at the beginning of each chapter. * Key terms: Refer to the lists of networking vocabulary introduced and highlighted in context in each chapter. * Glossary: Consult the comprehensive Glossary with more than 500 terms. * Summary of Activities and Labs: Maximize your study time with this complete list of all associated practice exercises at the end of each chapter. * Check Your Understanding: Evaluate your readiness with the end-of-chapter questions that match the style of questions you see in the online course quizzes. The answer key explains each answer. How To: Look for this icon to study the steps you need to learn to perform certain tasks. Interactive Activities: Reinforce your understanding of topics with dozens of exercises from the online course identified throughout the book with this icon. Videos: Watch the videos embedded within the online course. Packet Tracer Activities: Explore and visualize networking concepts using Packet Tracer exercises interspersed throughout the chapters and provided in the accompanying Labs & Study Guide book. Hands-on Labs: Work through all the course labs and additional Class Activities that are included in the course and published in the separate Labs & Study Guide. This book is offered exclusively for students enrolled in Cisco Networking Academy courses. It is not designed for independent study or professional certification preparation. Visit netacad.com to learn more about program options and requirements. Related titles: CCNA 200-301 Portable Command Guide Book: 9780135937822 eBook: 9780135937709 31 Days Before Your CCNA Exam Book: 9780135964088 eBook: 9780135964231 CCNA 200-301 Official Cert Guide, Volume 1 Book: 9780135792735 Premium Edition: 9780135792728 CCNA 200-301 Official Cert Guide, Volume 2 Book: 9781587147135 Premium Edition: 9780135262719

Download or read book Connecting Networks Companion Guide written by Cisco Networking Academy and published by Pearson Education. This book was released on 2014 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This course discusses the WAN technologies and network services required by converged applications in a complex network. The course allows you to understand the selection criteria of network devices and WAN technologies to meet network requirements. You will learn how to configure and troubleshoot network devices and resolve common issues with data link protocols. You will also develop the knowledge and skills needed to implement IPSec and virtual private network (VPN) operations in a complex network."--Back cover.

Download or read book Network Champion written by Wajid Hassan and published by . This book was released on 2019-12-29 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for students and professionals preparing for the network engineering interviews and discusses hundreds of scenarios based questions with simplified explanations to crack the interviews for the following Potential Job roles such as Network Engineer, Level 1 Support Engineer, Software Engineers building Networking products, Test Engineers, Network Development Engineers, Support EngineersThis book is also helpful for interviewers building and managing a team of network engineers such as Hiring Managers, IT Recruiters, Software Development Managers for Cloud, Delivery Managers for Telecommunication and Service Provider networksAlthough the tone of this book has been set for individuals starting out in the network engineering field however senior network engineers will also find it helpful to brush up their skills.Network engineering is the super glue that binds the several components of the Infrastructure that builds today's Cloud Computing environments such as AWS, Service Provider Networks, Telecommunication networks and other enterprise IP networks.The network engineering questions, and their answers will demonstrate the knowledge to deploy, maintain, secure and operate a medium-sized network using latest networking technologies. We expect that these network engineers can design, install, configure, and operate LAN, WAN, and dial access services for small to large networks using some of these protocols: IP, IGRP, Serial, Frame Relay, IP RIP, VLANs, RIP, Ethernet, Access Lists.

Download or read book CCDE Study Guide written by Marwan Al-shawi and published by Cisco Press. This book was released on 2015-10-01 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative, business-driven study resource for the tough CCDE Practical Exam CCDE Study Guide is written and reviewed by CCDE engineers and helps you to both improve your design skills and to study for and pass the CCDE exam. Network design is an art, combining broad technology knowledge and experience. This book covers a broad number of technologies, protocols and design options, and considerations that can bring these aspects together and show how they can be used and thought about based on different requirements and business goals. Therefore, this book does not attempt to teach foundational technology knowledge, instead each section: Highlights, discusses, and compares the limitations and advantages of the different design options in terms of scalability, performance, flexibility, availability, complexity, security, and so on to simplify the job and help you understand what technology, protocol, or design options should be selected and why, based on the business or application requirements or to fix a broken design that need to be optimized Covers design aspects of different protocols and technologies, and how they map with different requirements Highlights drivers toward using these technologies whether it is intended for enterprise or service provider network, depending on the topic and technology Using a business-driven approach, CCDE Study Guide helps you analyze business and technical requirements and develop network designs that are based on these business needs and goals, taking into account both the technical and non-technical design constraints. The various “scenario-based” design examples discussed in this book will help you craft design approaches and requirements analysis on such topics as converged enterprise network architectures, service provider network architectures, and data centers. The book also addresses high availability, IPv6, multicast, QoS, security, and network management design considerations, presenting you with an in-depth evaluation of a broad range of technologies and environments. Whether you are preparing for the CCDE exam or simply wish to gain better insight into the art of network design in a variety of environments, this book helps you learn how to think like an expert network designer as well as analyze and compare the different design options, principles, and protocols based on different design requirements. Master a business-driven approach to designing enterprise, service provider, and data center networks Analyze the design impact of business, functional, and application requirements Learn from scenario-based examples, including converged enterprise networks, service provider networks, and cloud-based data centers Overcome design limitations and fix broken designs Review design options and considerations related to Layer 2 and Layer 3 control plane protocols Build designs that accommodate new services and applications Consider design options for modern campus networks, including network virtualization Design WAN edge and Internet edge blocks in enterprise networks Review the architectural elements of a service provider-grade network Plan MPLS VPN network environments, including L2VPN and L3VPN Interconnect different networks or routing domains Design traditional, virtualized, and cloud-based data center networks Interconnect dispersed data center networks to protect business continuity Achieve appropriate levels of operational uptime and network resiliency Integrate IPv6, multicast, QoS, security, and network management into your designs

Download or read book Automate Your Network Introducing the Modern Approach to Enterprise Network Management written by John W. Capobianco and published by Independently Published. This book was released on 2019-03-09 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Network automation is one of the hottest topics in Information Technology today. This revolutionary book aims to illustrate the transformative journey towards full enterprise network automation. This book outlines the tools, technologies and processes required to fully automate an enterprise network. Automated network configuration management is more than converting your network configurations to code. The benefits of source control, version control, automated builds, automated testing and automated releases are realized in the world of networking using well established software development practices. The next-generation network administrative toolkit is introduced including Microsoft Team Foundation Server, Microsoft Visual Studio Code, Git, Linux, and the Ansible framework. Not only will these new technologies be covered at length, a new and continuously integrated / continuously delivered pipeline is also introduced. Starting with safe, simple, non-intrusive, non-disruptive information gathering organizations can ease into network automation while building a dynamic library of documentation and on-demand utilities for network operations. Once comfortable with the new ecosystem, administrators can begin making fully automated, orchestrated, and tactical changes to the network. The next evolutionary leap occurs when fully automated network configuration management is implemented. Important information from the network running-configurations is abstracted into data models in a human readable format. Device configurations are dynamically templated creating a scalable, intent-based, source of truth. Much like in the world of software development, full automation of the network using a CI/CD pipeline can be realized. Automated builds, automated testing and automated scheduled releases are orchestrated and executed when changes are approved and checked into the central repository. This book is unlike any on the market today as it includes multiple Ansible playbooks, sample YAML data models and Jinja2 templates for network devices, and a whole new methodology and approach to enterprise network administration and management. The CLI no longer cuts it. Readers should take away from this book a new approach to enterprise network management and administration as well as the full knowledge and understanding of how to use TFS, VS Code, Git, and Ansible to create an automation ecosystem. Readers should have some basic understanding of modern network design, operation, and configuration. No prior programming or software development experience is required. John Capobianco has over 20 years of IT experience and is currently a Technical Advisor for the Canadian House of Commons. A graduate of St. Lawrence College's Computer Programmer Analyst program, John is also a former Professor at St. Lawrence College in the Computer Networking and Technical Support (CNTS) program. John has achieved CCNP, CCDP, CCNA: Data Center, MCITP: EA/SA, CompTIA A+ / Network+, and ITIL Foundation certifications. Having discovered a new way to interface with the network John felt compelled to share this new methodology in hopes of revolutionizing the industry and bringing network automation to the world.

Download or read book Network Assessment Guide written by Shaun Hummel and published by Booksurge Llc. This book was released on 2007-04-19 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Network Assessment Guide, teaches an effective methodology for assessing your enterprise network before implementing new technologies. It is a reference guide that uses a real world assessment of an East Coast Financial Services company. The company is considering an acquisition and wants some snapshot information of their current network. That is accomplished using the network assessment case study as the framework along with a structured methodology that teaches all phases of a network assessment. The book explains the methodology with each specific network assessment and some strategies for improving your current infrastructure, management, availability, performance and security. The concepts described can be implemented with small, medium and enterprise companies. It is an excellent design tool for network engineers. Effective Network Design Tool Infrastructure Assessment Performance Assessment Availability Assessment Management Assessment Security Assessment Analysis and Recommendations Network Assessment Forms"

Download or read book A Graph Theoretic Approach to Enterprise Network Dynamics written by Horst Bunke and published by Springer Science & Business Media. This book was released on 2007-04-05 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph treats the application of numerous graph-theoretic algorithms to a comprehensive analysis of dynamic enterprise networks. Network dynamics analysis yields valuable information about network performance, efficiency, fault prediction, cost optimization, indicators and warnings. Based on many years of applied research on generic network dynamics, this work covers a number of elegant applications (including many new and experimental results) of traditional graph theory algorithms and techniques to computationally tractable network dynamics analysis to motivate network analysts, practitioners and researchers alike.