Download or read book Enhancing Delivery of Poorly Water soluble Drugs by Innovative Amorphous Solid Dispersions written by Scott Victor Jermain and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poorly water-soluble drugs continue to dominate today’s drug development pipelines, and thus a multitude of technologies and solubility-enhancing methodologies have been commercialized to address this issue. One-such methodology to enhance the solubility of poorly water-soluble drugs is the development of amorphous solid dispersions. What was once considered a risky method of drug delivery (due to lack of drug kinetic stability in its amorphous state), formulating drugs as amorphous solid dispersions has grown significantly over the past two decades. Two amorphous solid dispersion-producing technologies have become well-understood for the development and successful delivery of poorly water-soluble drugs, and thus an overwhelming majority of commercialized amorphous solid dispersion products are processed by these two technologies; hot melt extrusion and spray drying. Each technology has distinct advantages and disadvantages, and thus many poorly water-soluble drugs are unable to process by either technology using conventional techniques. Thus, novel utilization of excipients and processing methods is necessary to continually expand the formulation design space. Furthermore, the development and commercialization of novel amorphous solid dispersion-producing technologies is necessary to further-expand the formulation design space. Therefore, the following research is an effort to expand the formulation design space of poorly water-soluble drugs while forming amorphous solid dispersions. The following research focuses on continued innovation in the field of amorphous solid dispersions to enhance the bioavailability of poorly water-soluble drugs. These research directions demonstrate innovative use of an ordinary excipient to enhance delivery of amorphous solid dispersions processed by hot melt extrusion. Additionally, these studies demonstrate the use (and further understanding) of a novel technology, KinetiSol, that allows for processing amorphous solid dispersions without the necessity of external thermal input or solvent(s). KinetiSol-processed materials are compared with spray dried materials to evaluate the kinetics behind drug release of a weakly basic drug processed with an ionic polymer, and findings from this study will be essential for future delivery of amorphous solid dispersions of weakly basic drugs in ionic polymers

Download or read book Amorphous Solid Dispersions written by Navnit Shah and published by Springer. This book was released on 2014-11-21 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers a comprehensive guide on the theory and practice of amorphous solid dispersions (ASD) for handling challenges associated with poorly soluble drugs. In twenty-three inclusive chapters, the book examines thermodynamics and kinetics of the amorphous state and amorphous solid dispersions, ASD technologies, excipients for stabilizing amorphous solid dispersions such as polymers, and ASD manufacturing technologies, including spray drying, hot melt extrusion, fluid bed layering and solvent-controlled micro-precipitation technology (MBP). Each technology is illustrated by specific case studies. In addition, dedicated sections cover analytical tools and technologies for characterization of amorphous solid dispersions, the prediction of long-term stability, and the development of suitable dissolution methods and regulatory aspects. The book also highlights future technologies on the horizon, such as supercritical fluid processing, mesoporous silica, KinetiSol®, and the use of non-salt-forming organic acids and amino acids for the stabilization of amorphous systems. Amorphous Solid Dispersions: Theory and Practice is a valuable reference to pharmaceutical scientists interested in developing bioavailable and therapeutically effective formulations of poorly soluble molecules in order to advance these technologies and develop better medicines for the future.

Download or read book Formulating Poorly Water Soluble Drugs written by Robert O. Williams III and published by Springer Science & Business Media. This book was released on 2011-12-04 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is intended to provide the reader with a breadth of understanding regarding the many challenges faced with the formulation of poorly water-soluble drugs as well as in-depth knowledge in the critical areas of development with these compounds. Further, this book is designed to provide practical guidance for overcoming formulation challenges toward the end goal of improving drug therapies with poorly water-soluble drugs. Enhancing solubility via formulation intervention is a unique opportunity in which formulation scientists can enable drug therapies by creating viable medicines from seemingly undeliverable molecules. With the ever increasing number of poorly water-soluble compounds entering development, the role of the formulation scientist is growing in importance. Also, knowledge of the advanced analytical, formulation, and process technologies as well as specific regulatory considerations related to the formulation of these compounds is increasing in value. Ideally, this book will serve as a useful tool in the education of current and future generations of scientists, and in this context contribute toward providing patients with new and better medicines.

Download or read book Solubility enhancement of poorly water soluble drugs by solid dispersion written by Adela Kalivoda and published by Cuvillier Verlag. This book was released on 2012-06-25 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary Solid dispersions are a promising approach for controlled release drug delivery systems as both the bioavailability enhancement of poorly water-soluble drugs as well as the sustained release of water-soluble drugs are possible to optimize their in vivo performance. Different methods for the manufacture of solid dispersion systems have been introduced in literature. In the present work, two methods are compared: hot-melt extrusion and ultrasound-assisted compaction technique. Various carrier systems and drugs with different physicochemical properties are applied to investigate the feasibility of the technologies for pharmaceutical formulation. The formulations are compared to the corresponding untreated physical blends of the components regarding their solid state structure and dissolution behavior to assess the effect of the manufacturing technique. Ultrasound-assisted compaction technique improves the initial dissolution rate of fenofibrate, a poorly water-soluble model drug. The crystalline API is partially converted into its amorphous state. As equivalent results can be achieved if the polymers are added directly to the dissolution medium, the dissolution enhancement is attributed to an improved wettability of the drug. A statistical design of experiments is employed to investigate the effect of the process parameters on the results. Difficulties are encountered in the determination of process parameters which result in an optimal outcome. The process is very sensitive to the smallest changes of settings, for example of the position of the sonotrode. Additionally, the delivery of ultrasound energy is inhomogeneous. There is no or only insufficient user control of these parameters available. Furthermore, the duration of ultrasound energy delivery which is identified as a crucial parameter cannot be set by the user. The variable factors ultrasound energy, pressure of the lower piston and pressure of the upper piston affect the defined responses in the opposite direction. Hence, there are no settings which result in a satisfactory outcome. A strong influence of the material characteristics on the process is observed leading to a batch to batch variability. Due to an insufficient reproducibility of results, the application of the technology cannot be recommended in its current state in the pharmaceutical formulation development and/or production. Improvements in homogeneity of energy delivery, process monitoring, user control and amount of leakage are mandatory for an acceptable performance and a future application in the pharmaceutical sector. The polymers COP, HPMC and PVCL-PVAc-PEG are well suitable as carriers for hot-melt extruded formulations of fenofibrate. All three extrudates are amorphous one-phase systems with the drug molecularly dispersed in the polymer. The enhancement of the initial dissolution rate and the maximum concentration level achieved are dependent on the applied carrier system. Supersaturation levels of up to 12.1 times are reached which are not stable due to recrystallization processes. The application of blends of polymers as carriers reduces the decrease rate after cmax. Because of water absorption and polymer relaxation, the overall dissolution performance decreases with increasing storage times which can be avoided through an optimization of the packaging. If oxeglitazar is used as API, the initial dissolution rate of the extrudates is below that of the untreated drug, with the exception of the ternary blend of COP, HPMC and oxeglitazar which shows a substance-specific super-additive effect. In contrast to the other extrudates, the formulation of PVCL-PVAc-PEG and oxeglitazar does not form a molecularly dispersed solid solution of the drug in the carrier. Instead, an amorphous two-phase system is present. No changes are observed after storage, presumably due to higher glass transition temperatures of the hot-melt extruded systems which are considerably above those of the corresponding fenofibrate extrudates. With felodipine as API, the dissolution profile is enhanced with COP as single carrier. If HPMC or PVCL-PVAc-PEG is used as single or additional polymeric carriers, the dissolution is equivalent (HPMC) or lower (PVCL-PVAc-PEG) than that of the pure drug although molecularly disperse systems are present in all cases. Out of the two investigated methods only hot-melt extrusion is a suitable technology to manufacture solid dispersions with an improved dissolution behavior. The dissolution profile of the extrudates can be influenced by adding polymers with differing physicochemical characteristics. Predictions on the dissolution behavior of the extrudates with polymeric blends as carriers can be made if there is knowledge on the dissolution profiles of the corresponding single polymeric extrudates. Due to substance-specific effects, the results are not transferable from drug to drug. Even so, the data are promising as the release behavior of the manufactured extrudates can be easily modified and readily adapted to one's needs. Further research will have to be conducted to verify the concept and the relevance of the results in vivo. Zusammenfassung Feste Dispersionen sind ein vielversprechender Ansatz zur Herstellung von Drug Delivery-Systemen mit kontrollierter Wirkstofffreisetzung, da sie sowohl die Bioverfügbarkeit schlecht wasserlöslicher Arzneistoffe verbessern als auch die Freisetzung gut wasserlöslicher Arzneistoffe verzögern können und so deren in vivo Verhalten optimieren. Verschiedene Herstellungsmethoden wurden in der Literatur vorgestellt. In der vorliegenden Arbeit werden zwei Technologien miteinander verglichen: Schmelzextrusion und Ultraschall gestützte Verpressung (USAC). Verschiedene Trägersysteme und Arzneistoffe mit unterschiedlichen physikochemischen Eigenschaften werden untersucht, um die Einsatzmöglichkeit im pharmazeutischen Bereich zu überprüfen. Die Struktur der hergestellten Systeme und deren Freisetzungsverhalten werden mit den physikalischen Mischungen der Komponenten verglichen, um den Einfluss der Formulierung zu bestimmen. Durch USAC wird die initiale Freisetzungsrate von Fenofibrat, einem schlecht wasserlöslichen Modellarzneistoff, verbessert. Eine teilweise Umwandlung vom kristallinen in den amorphen Zustand tritt auf. Vergleichbare Ergebnisse werden bei einer Polymerzugabe zum Freisetzungsmedium erreicht; daher wird davon ausgegangen, dass vor allem eine verbesserte Benetzbarkeit des Arzneistoffs eine Rolle spielt. Mittels statistischer Versuchsplanung wird der Einfluss der verschiedenen Prozessparameter untersucht. Die Einstellung der Prozessparameter, um ein optimales Ergebnis zu erhalten, gestaltet sich schwierig. Der Prozess reagiert auf kleinste Veränderungen, zum Beispiel der Position der Sonotrode, überaus sensitiv. Außerdem wird die Ultraschallenergie nicht homogen übertragen. Die Kontrolle dieser Parameter durch den Anwender ist nicht oder nur unzureichend möglich. Ebenso kann die Dauer der Ultraschallapplizierung, die essentiell für den Prozess ist, nicht eingestellt werden. Die Prozessparameter Ultraschallenergie, Unterstempeldruck und Sonotrodendruck beeinflussen die Zielgrößen in entgegengesetzter Richtung. Daher gibt es keine Einstellung, die für alle Zielgrößen optimale Ergebnisse liefert. Zusätzlich ist der Prozess stark abhängig von den Eigenschaften des verwendeten Materials: Die Verwendung unterschiedlicher Polymerchargen macht eine Anpassung der Prozessparameter notwendig, um vergleichbare Ergebnisse zu erhalten. Eine ausreichende Reproduzierbarkeit der Ergebnisse für einen Einsatz dieser Technologie in Formulierungsentwicklung oder Produktion ist nicht gegeben. Eine homogene Ultraschallenergiezufuhr sowie Verbesserungen der Prozessüberwachung, der Benutzerkontrolle und eine Verminderung der austretenden Materialmenge sind für eine akzeptable Leistung und eine zukünftige Anwendung im pharmazeutischen Bereich zwingend erforderlich. Die Polymere COP, HPMC, PVCL-PVAc-PEG sind für eine Freisetzungsverbesserung von Fenofibrat mittels Schmelzextrusion geeignet. Es liegen einphasige, molekulardisperse feste Lösungen vor. Abhängig von der Trägersubstanz wird die initiale Freisetzungsrate unterschiedlich stark erhöht, ebenso die maximale Konzentration des Arzneistoffes in Lösung. Eine bis zu 12.1-fache Übersättigung wird erreicht, die aufgrund von Rekristallisationsprozessen nicht stabil ist. Der Einsatz von polymeren Mischungen reduziert die Geschwindigkeit des Konzentrationsabfalls. Die Absorption von Wasser und Relaxationseffekte vermindern die Freisetzungserhöhung mit zunehmender Lagerdauer; dieser Entwicklung kann durch eine Optimierung des Packmittels entgegengewirkt werden. Wird der ebenfalls schwer wasserlösliche Arzneistoff Oxeglitazar verwendet, so ist die initiale Freisetzungsrate der Extrudate der des reinen Arzneistoffs unterlegen, mit Ausnahme der ternären Mischung von COP, HPMC und Oxeglitazar, die einen substanzspezifischen überadditiven Effekt aufweist. PVCL-PVAc-PEG-Oxeglitazar-Extrudate bilden im Gegensatz zu den übrigen Formulierungen keine molekulardisperse feste Lösung, sondern ein amorphes Zwei-Phasen-System. Eine Veränderung während der Lagerzeit wird nicht beobachtet, vermutlich aufgrund der höheren Glasübergangstemperaturen dieser Systeme. Lediglich das Freisetzungsprofil von COP-Felodipin-Extrudaten ist verbessert. Gegenüber dem reinen Arzneistoff ist die Freisetzung der übrigen Extrudate vergleichbar (HPMC) oder verringert (PVCL-PVAc-PEG), obwohl auch hier molekulardisperse Systeme vorliegen. Von den beiden untersuchten Technologien ist lediglich die Schmelzextrusion geeignet, um feste Dispersionen mit einem verbesserten Freisetzungsverhalten herzustellen. Das Freisetzungsprofil der Extrudate kann durch den Zusatz von Polymeren mit unterschiedlichen Eigenschaften optimiert und vorhergesagt werden, wenn das Freisetzungsprofil der Einzelpolymer-Extrudate bekannt ist. Die Ergebnisse sind aufgrund von substanzspezifischen Effekten nicht von Arzneistoff auf Arzneistoff übertragbar. Nichtsdestotrotz sind die Erkenntnisse dieser Arbeit vielversprechend, da gezeigt wird, dass das Freisetzungsprofil der Extrudate leicht beeinflusst und an spezifische Anforderungen angepasst werden kann. Weitere Untersuchungen sind notwendig, um das Konzept und die Relevanz der Ergebnisse in vivo zu überprüfen.

Download or read book Advanced Formulation and Processing Technologies in the Oral Delivery of Poorly Water soluble Drugs written by Bo Lang and published by . This book was released on 2013 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advance of combinational chemistry and high throughput screening, an increasing number of pharmacologically active compounds have been discovered and developed. A significant proportion of those drug candidates are poorly water-soluble, thereby exhibiting limited absorption profiles after oral administration. Therefore, advanced formulation and processing technologies are demanded in order to overcome the biopharmaceutical limits of poorly water-soluble drugs. A number of pharmaceutical technologies have been investigated to address the solubility issue, such as particle size reduction, salt formation, lipid-based formulation, and solubilization. Within the scope of this dissertation, two of the pharmaceutical technologies were investigated names thin film freezing and hot-melt extrusion. The overall goal of the research was to improve the oral bioavailability of poorly water-soluble drugs by producing amorphous solid dispersion systems with enhanced wetting, dissolution, and supersaturation properties. In Chapter 1, the pharmaceutical applications of hot-melt extrusion technology was reviewed. The formulation and process development of hot-melt extrusion was discussed. In Chapter 2, we investigated the use of thin film freezing technology combined with template emulsion system to improve the dissolution and wetting properties of itraconazole (ITZ). The effects of formulation variables (i.e., the selection of polymeric excipients and surfactants) and process variables (i.e., template emulsion system versus cosolvent system) were studied. The physic-chemical properties and dissolution properties of thin film freezing compositions were characterized extensively. In Chapter 3 and Chapter 4, we investigated hot-melt extrusion technology for producing amorphous solid dispersion systems and improving the dissolution and absorption of ITZ. Formulation variables (i.e., the selection of hydrophilic additives, the selection of polymeric carriers) and process variables (i.e., the screw configuration of hot-melt extrusion systems) were investigated in order to optimize the performance of ITZ amorphous solid dispersions. The effects of formulation and process variables on the properties of hot-melt extrusion compositions were investigated. In vivo studies revealed that the oral administration of advanced ITZ amorphous solid dispersion formulations rendered enhanced oral bioavailability of the drug in the rat model. Results indicated that novel formulation and processing technologies are viable approaches for enhancing the oral absorption of poorly water-soluble drugs.

Download or read book Innovative Dosage Forms written by Yogeshwar Bachhav and published by John Wiley & Sons. This book was released on 2019-12-04 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Teaches future and current drug developers the latest innovations in drug formulation design and optimization This highly accessible, practice-oriented book examines current approaches in the development of drug formulations for preclinical and clinical studies, including the use of functional excipients to enhance solubility and stability. It covers oral, intravenous, topical, and parenteral administration routes. The book also discusses safety aspects of drugs and excipients, as well as regulatory issues relevant to formulation. Innovative Dosage Forms: Design and Development at Early Stage starts with a look at the impact of the polymorphic form of drugs on the preformulation and formulation development. It then offers readers reliable strategies for the formulation development of poorly soluble drugs. The book also studies the role of reactive impurities from the excipients on the formulation shelf life; preclinical formulation assessment of new chemical entities; and regulatory aspects for formulation design. Other chapters cover innovative formulations for special indications, including oncology injectables, delayed release and depot formulations; accessing pharmacokinetics of various dosage forms; physical characterization techniques to assess amorphous nature; novel formulations for protein oral dosage; and more. -Provides information that is essential for the drug development effort -Presents the latest advances in the field and describes in detail innovative formulations, such as nanosuspensions, micelles, and cocrystals -Describes current approaches in early pre-formulation to achieve the best in vivo results -Addresses regulatory and safety aspects, which are key considerations for pharmaceutical companies -Includes case studies from recent drug development programs to illustrate the practical challenges of preformulation design Innovative Dosage Forms: Design and Development at Early Stage provides valuable benefits to interdisciplinary drug discovery teams working in industry and academia and will appeal to medicinal chemists, pharmaceutical chemists, and pharmacologists.

Download or read book Pharmaceutical Amorphous Solid Dispersions written by Ann Newman and published by John Wiley & Sons. This book was released on 2015-03-09 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a roadmap from early to late stages of drug development, this book overviews amorphous solid dispersion technology – a leading platform to deliver poorly water soluble drugs, a major hurdle in today’s pharmaceutical industry. • Helps readers understand amorphous solid dispersions and apply techniques to particular pharmaceutical systems • Covers physical and chemical properties, screening, scale-up, formulation, drug product manufacture, intellectual property, and regulatory considerations • Has an appendix with structure and property information for polymers commonly used in drug development and with marketed drugs developed using the amorphous sold dispersion approach • Addresses global regulatory issues including USA regulations, ICH guidelines, and patent concerns around the world

Download or read book Hot Melt Extrusion written by Dennis Douroumis and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-melt extrusion (HME) - melting a substance and forcing it through an orifice under controlled conditions to form a new material - is an emerging processing technology in the pharmaceutical industry for the preparation of various dosage forms and drug delivery systems, for example granules and sustained release tablets. Hot-Melt Extrusion: Pharmaceutical Applications covers the main instrumentation, operation principles and theoretical background of HME. It then focuses on HME drug delivery systems, dosage forms and clinical studies (including pharmacokinetics and bioavailability) of HME products. Finally, the book includes some recent and novel HME applications, scale -up considerations and regulatory issues. Topics covered include: principles and die design of single screw extrusion twin screw extrusion techniques and practices in the laboratory and on production scale HME developments for the pharmaceutical industry solubility parameters for prediction of drug/polymer miscibility in HME formulations the influence of plasticizers in HME applications of polymethacrylate polymers in HME HME of ethylcellulose, hypromellose, and polyethylene oxide bioadhesion properties of polymeric films produced by HME taste masking using HME clinical studies, bioavailability and pharmacokinetics of HME products injection moulding and HME processing for pharmaceutical materials laminar dispersive & distributive mixing with dissolution and applications to HME technological considerations related to scale-up of HME processes devices and implant systems by HME an FDA perspective on HME product and process understanding improved process understanding and control of an HME process with near-infrared spectroscopy Hot-Melt Extrusion: Pharmaceutical Applications is an essential multidisciplinary guide to the emerging pharmaceutical uses of this processing technology for researchers in academia and industry working in drug formulation and delivery, pharmaceutical engineering and processing, and polymers and materials science. This is the first book from our brand new series Advances in Pharmaceutical Technology. Find out more about the series here.

Download or read book Expanding the Processing Space for Amorphous Solid Dispersions written by Daniel Alan Davis (Jr.) and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous solid dispersions are an effective formulation approach to enhance the solubility of the increasing number of poorly water-soluble drugs in development pipelines. The two most common formulation technologies to produce amorphous solid dispersions are hot-melt extrusion and spray drying, both of which have been used to commercialize numerous drug products in the past two decades. However, both technologies have their own unique advantages and disadvantages, making many poorly water-soluble drugs not processable by conventional techniques for either technology can Thus, there is a need for innovative formulation technologies to overcome limitations within the current processing space for amorphous solid dispersions The subsequent chapters focus on continued innovation within the field of amorphous solid dispersions. The research demonstrates the ability to expand the current processing space of KinetiSol® processing by incorporating a novel excipient, Candurin®, that enables prolonged mixing at lower processing temperatures to produce amorphous solid dispersions. Further, the research demonstrates that residual crystallinity after processing can decrease degradation for thermal- and shear-sensitive drugs while remaining stable during stability and providing suitable bioavailability enhancement in-vivo. Additionally, a new technology was invented to produce amorphous solid dispersions. A novel application of selective laser sintering three-dimensional printing was applied to thermal- and shear-sensitive poorly water-soluble drugs to demonstrate its ability to successfully form an amorphous formulation state without degradation while providing solubility enhancement

Download or read book Drug Delivery Strategies for Poorly Water Soluble Drugs written by Dionysios Douroumis and published by John Wiley & Sons. This book was released on 2012-12-19 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many newly proposed drugs suffer from poor water solubility, thus presenting major hurdles in the design of suitable formulations for administration to patients. Consequently, the development of techniques and materials to overcome these hurdles is a major area of research in pharmaceutical companies. Drug Delivery Strategies for Poorly Water-Soluble Drugs provides a comprehensive overview of currently used formulation strategies for hydrophobic drugs, including liposome formulation, cyclodextrin drug carriers, solid lipid nanoparticles, polymeric drug encapsulation delivery systems, self–microemulsifying drug delivery systems, nanocrystals, hydrosol colloidal dispersions, microemulsions, solid dispersions, cosolvent use, dendrimers, polymer- drug conjugates, polymeric micelles, and mesoporous silica nanoparticles. For each approach the book discusses the main instrumentation, operation principles and theoretical background, with a focus on critical formulation features and clinical studies. Finally, the book includes some recent and novel applications, scale-up considerations and regulatory issues. Drug Delivery Strategies for Poorly Water-Soluble Drugs is an essential multidisciplinary guide to this important area of drug formulation for researchers in industry and academia working in drug delivery, polymers and biomaterials.

Download or read book Pulmonary Drug Delivery written by Ali Nokhodchi and published by John Wiley & Sons. This book was released on 2015-08-03 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drug therapy via inhalation route is at the cutting edge of modern drug delivery research. There has been significant progress on the understanding of drug therapy via inhalation products. However, there are still problems associated with their formulation design, including the interaction between the active pharmaceutical ingredient(s) (APIs), excipients and devices. This book seeks to cover some of the most pertinent issues and challenges of such formulation design associated with industrial production and desirable clinical outcome. The chapter topics have been selected with a view to integrating the factors that require consideration in the selection and design of device and formulation components which impact upon patient usability and clinical effectiveness. The challenges involved with the delivery of macromolecules by inhalation to both adult and pediatric patients are also covered. Written by leading international experts from both academia and industry, the book will help readers (formulation design scientists, researchers and post-graduate and specialized undergraduate students) develop a deep understanding of key aspects of inhalation formulations as well as detail ongoing challenges and advances associated with their development.

Download or read book Investigation of Amorphous Solid Dispersions of Poorly Water soluble Drugs in Poly 2 hydroxyethyl Methacrylate Hydrogels for Enhanced Solubility and Controlled Release written by Dajun Sun and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Investigation of Amorphous Solid Dispersions for Solubility Enhancement of Poorly Water soluble Drugs written by Andrew Olutoye Ojo and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The preparation of amorphous solid dispersions (ASDs) has enabled the development of oral dosage forms for many poorly water-soluble compounds. The aim of the work presented in this dissertation is to advance our understanding of ASDs, specifically their long-term stability with respect to crystallization and the implications of instability on product performance. Advancing knowledge in these areas is pivotal for the pharmaceutical industry and its efforts in drug discovery. Much of our understanding of ASD stability results from empirical or extrapolative models that have been applied to describe stability. Their application has been limited and they do not provide fundamental insights into the recrystallization process to aid in the rationale development in ASDs. Notably, they fail to consider supersaturation as the driving force for crystallization, diffusivity in viscous systems, and interfacial effects. The works presented in this dissertation model the mechanisms of crystal nucleation and growth in ASDs by incorporating these concepts, develop and apply characterization tools to determine critical model parameters, and study the effects of crystallization on product performance.

Download or read book Formulation and Processing Technologies for Dissolution Enhancement of Poorly Water soluble Drugs written by Justin Roy Hughey and published by . This book was released on 2012 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The number of newly developed chemical entities exhibiting poor water solubility has increased dramatically in recent years. In many cases this intrinsic property results in poor or erratic dissolution in biological fluids. Improving aqueous solubility of these compounds, even temporarily, can have a significant impact on in vivo performance. Single phase amorphous solid dispersions of a drug and polymer have emerged as a technique to not only increase the level of drug supersaturation but also maintain these levels for extended periods of time. Hot-melt extrusion (HME) has become the preferred processing technique to prepare systems such as these but has a number of limitations that prevent the successful formulation of many drug substances. Within this dissertation, the use of concentration enhancing polymers was investigated in parallel with a thorough evaluation of a novel fusion-based processing technique, KinetiSol® Dispersing (KSD), to prepare single phase amorphous solid dispersions that could not be successfully prepared by HME. Studies showed that the KSD technique is suitable for rendering thermally labile and high melting point drug substances amorphous through a combination of frictional and shearing energy. Compounds such as these were shown to degrade during HME processing due to relatively long residence times and low shear forces. Similarly, the KSD process was shown to successfully process solid dispersion compositions containing a high viscosity polymer with significantly lower levels of polymer degradation than obtained by HME processing. In the final study, KSD processing was used to prepare solid dispersions containing the hydrophilic polymer Soluplus[superscript TM] and methods were evaluated to formulate a tablet with rapid tablet disintegration characteristics, a requirement for sufficient dissolution enhancement. Combined, the studies demonstrated the effectiveness of combining proper polymer selection and formulation approaches with a suitable processing technique to form solid dispersion systems that provide rapid and extended durations of supersaturation.

Download or read book Pharmaceutical Dosage Forms written by Larry L. Augsburger and published by CRC Press. This book was released on 1990-03-30 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent trends in solubility and bioavailability enhancement for poorly water soluble drugs written by 최한곤 and published by 한양대학교 출판부. This book was released on 2019-12-17 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: 난용상 약물의 용해도 및 생체[이용율 증진에 대한 최근 연구동향을 모아 발간하고자 함 1. Silymarin-loaded solid nanoparticles with excellent hepatic protection: physicochemical characterization and in vivo evaluation. 2. The Influence of Bile Salt on the Chemotherapeutic Response of Docetaxel-loaded Thermosensitive Nanomicelles. 3. Enhanced oral bioavailability of fenofibrate using polymeric nanoparticulated systems: Physicochemical characterization and in vivo investigation. 4. Tumor-targeting. pH-sensitive nanoparticles for docetaxel delivery to drug-resistant cancer cells. 5. Comparative study on solid self-nanoemulsifying drug delivery and solid dispersion system for enhanced solubility and bioavailability of ezetimibe. 6. Novel electrosprayed nanospherules for enhanced aqueous solubility and oral bioavailability of poorly water-soluble fenofibrate. 7. Receptor-targeted. drug-loaded. functionalized graphene oxides for chemotherapy and photothermal therapy. 8. Progressive slowdown/prevention of cellular senescence by CD9-targeted delivery of rapamycin using lactose-wrapped calcium carbonate nanoparticles. 9. Optimization and physicochemical characterization of a cationic lipid-phosphatidylcholine mixed emulsion formulated as a highly efficient vehicle that facilitates adenoviral gene transfer. 10. Combination of NIR therapy and regulatory T cell modulation using layer-by-layer hybrid nanoparticles for effective cancer photoimmunotherapy. 11. Cyclic RGD-conjugated Pluronic® blending system for active. targeted drug delivery. 12. Transferrin-Conjugated Polymeric Nanoparticle for Receptor-Mediated Delivery of Doxorubicin in Doxorubicin-Resistant Breast Cancer Cells. 13. Self-microemulsifying drug delivery system (SMEDDS) for improved oral delivery and photostability of methotrexate. 14. Comparison of 1-palmitoyl-2-linoleoyl-3-acetyl-rac-glycerol-loaded self-emulsifying granule and solid self-nanoemulsifying drug delivery system: powder property. dissolution and oral bioavailability. 15. Liposomal Formulations for Nose-to-Brain Delivery: Recent Advances and Future Perspectives. 16. Development of folate-functionalized zein nanoparticles for ligand-directed delivery of paclitaxel.

Download or read book Water Insoluble Drug Formulation written by Ron Liu and published by CRC Press. This book was released on 2018-03-12 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties and Formulation: From Theory to Real-World Application Scientists have attributed more than 40 percent of the failures in new drug development to poor biopharmaceutical properties, particularly water insolubility. Issues surrounding water insolubility can postpone or completely derail important new drug development. Even the much-needed reformulation of currently marketed products can be significantly affected by these challenges. More recently it was reported that the percentage increased to 90% for the candidates of new chemical entities in the discovery stage and 75% for compounds under development. In the most comprehensive resource on the topic, this third edition of Water-Insoluble Drug Formulation brings together a distinguished team of experts to provide the scientific background and step-by-step guidance needed to deal with solubility issues in drug development. Twenty-three chapters systematically describe the detailed discussion on solubility theories, solubility prediction models, the aspects of preformulation, biopharmaceutics, pharmacokinetics, regulatory, and discovery support of water-insoluble drugs to various techniques used in developing delivery systems for water-insoluble drugs. This book includes more than 15 water-insoluble drug delivery systems or technologies, illustrated with case studies and featuring oral and parenteral applications. Highlighting the most current information and data available, this seminal volume reflects the significant progress that has been made in nearly all aspects of this field. The aim of this book is to provide a handy reference for pharmaceutical scientists in the handling of formulation issues related to water-insoluble drugs. In addition, this book may be useful to pharmacy and chemistry undergraduate students and pharmaceutical and biopharmaceutical graduate students to enhance their knowledge in the techniques of drug solubilization and dissolution enhancement.