EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Enhanced Peak to Average Power Ratio  PAPR  Algorithm in Long Term Evolution  LTE  Standard

Download or read book Enhanced Peak to Average Power Ratio PAPR Algorithm in Long Term Evolution LTE Standard written by Mohanad Janat and published by . This book was released on 2014 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Long Term Evolution (LTE), is an OFDM based system considered the 4G standard that supports high mobility up to 350km/h and high bandwidths. However, LTE suffers from high peak to average power ratio (PAPR) which critically affects the system performance by increasing the bit error rate and decreasing the spectral efficiency. Many solutions have been introduced to the LTE standard to overcome this issue. A hardware solution has been suggested utilizes high power amplifiers with very wide linearity area covering the high peak area of the OFDM symbol, but, the solution is expensive rendering it not affordable by end users. Thus, PAPR reduction algorithms come into place to resolve the issue by manipulating the OFDM symbols blocks produced by MIMO-OFDM systems. The result is an increase in the efficiency of the whole system by reducing PAPR. However, a lot of these algorithms suffer increasing computational complexity to achieve high PAPR reduction performance which affects the overall circuitry complexity. A modified algorithm has been proposed in this research that aims to achieve high PAPR reduction performance while keeping the computational complexity level as low as possible. A modified Cross Antenna Rotation and Inversion (CARI) is introduced in this work, where the normal CARI operations are applied to the first two blocks in the space domain which maintains the circuitry complexity lower than the original CARI, followed by a rotation in the space and frequency domains, hence, utilizing the degree of freedom inherent in both OFDM-MIMO space and frequency domains. The proposed PAPR reduction scheme has been evaluated using Matlab simulator. For simulation approach, the performance metric considered is the Complementary Cumulative Distribution Function CCDF averaged our 105 OFDM symbols. The results have shown that the proposed scheme has better performance by gain of 0.18dB than original CARI at CCDF=10-3 and the sub-blocks M=8. The bench marking against Individual SLM the proposed scheme has shown better performance by gain of 0.5dB than Individual SLM at CCDF=10-3 and the sub-blocks M=8, and finally with concurrent SLM the proposed scheme has better performance by gain of 0.8dB Individual SLM at CCDF=10-3 and the sub-blocks M=8.

Book Improvement of Papr Reduction for Ofdm Signal in Lte System

Download or read book Improvement of Papr Reduction for Ofdm Signal in Lte System written by Md. Munjure Mowla and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last couple of years, wireless communications have experienced a quick growth due to the ubiquitous mobility, super internet speed and huge multimedia services & applications. Orthogonal frequency division multiplexing (OFDM) is an emerging research field of wireless communication and finds its application where high data rate is required at low latency and better spectral efficiency. OFDM signals have a generic problem of high peak to average power ratio (PAPR) which is defined as the ratio of the peak power to the average power of the OFDM signal. The drawback of high PAPR is that the dynamic range of the power amplifier (PA) and digital-to-analog converter (DAC) during the transmission and reception of the signal is higher. The main focus of this research is to design & implement a new PAPR reduction scheme based on amplitude clipping & filtering method which reduces the PAPR significantly. Simulation results show the considerable improvement in case of PAPR reduction compare to an existing method. Besides these, overview, motivation & different types of analysis of PAPR reduction techniques are discussed in this book.

Book Wireless Communications and Applications

Download or read book Wireless Communications and Applications written by Patrick Sénac and published by Springer Science & Business Media. This book was released on 2012-03-29 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the First International ICST Conference on Wireless Communications and Applications, ICWCA 2011, held in Sanya, China, in August 2011. The 43 revised full papers presented were carefully reviewed and selected from around 90 submissions and cover a wide range of topics as mobile ad hoc networks, sensor networks, network architectural design, network protocol design, local area networks, MAC, routing, and transport protocols, quality of service provisioning, reliability and fault tolerance issues, resource allocation and management, signal processing, medical imaging, data aggregation techniques, security and privacy issues, wireless computing and applications for wireless network as smart grid, agriculture, health care, smart home, conditional monitoring, etc.

Book International Conference on Remote Sensing and Wireless Communications  RSWC 2014

Download or read book International Conference on Remote Sensing and Wireless Communications RSWC 2014 written by John Kong and published by DEStech Publications, Inc. This book was released on 2014-02-19 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Remote Sensing and Wireless Communications (RSWC 2014) will be held from February 22nd to 23rd, 2014 in Shanghai, China. RSWC 2014 will bring together top researchers from Asian Pacific areas, North America, Europe and around the world to exchange research results and address open issues in all aspects of Remote Sensing and Wireless Communications. The RSWC 2014 welcomes the submission of original full research papers, short papers, posters, workshop proposals, tutorials, and industrial professional reports.

Book Proceedings of the 11th International Conference on Robotics  Vision  Signal Processing and Power Applications

Download or read book Proceedings of the 11th International Conference on Robotics Vision Signal Processing and Power Applications written by Nor Muzlifah Mahyuddin and published by Springer Nature. This book was released on 2022-02-11 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceeding is a collection of research papers presented at the 11th International Conference on Robotics, Vision, Signal Processing & Power Applications (RoViSP 2021). The theme of RoViSP 2021 “Enhancing Research and Innovation through the Fourth Industrial Revolution (IR 4.0)” served as a platform for researchers, scientists, engineers, academicians as well as industrial professionals from all around the globe to present and exchange their research findings and development activities through oral presentations. The book covers various topics of interest, including: Robotics, Control, Mechatronics and Automation Telecommunication Systems and Applications Electronic Design and Applications Vision, Image and Signal Processing Electrical Power, Energy and Industrial Applications Computer and Information Technology Biomedical Engineering and Applications Intelligent Systems Internet-of-things Mechatronics Mobile Technology

Book Proceedings of the 12th International Conference on Robotics  Vision  Signal Processing and Power Applications

Download or read book Proceedings of the 12th International Conference on Robotics Vision Signal Processing and Power Applications written by Nur Syazreen Ahmad and published by Springer Nature. This book was released on with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Multimedia  Computer Graphics and Broadcasting  Part I

Download or read book Multimedia Computer Graphics and Broadcasting Part I written by Tai-hoon Kim and published by Springer Science & Business Media. This book was released on 2011-11-29 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volume set, CCIS 262 and 263, constitutes the refereed proceedings of the International Conference, MulGraB 2011, held as Part of the Future Generation Information Technology Conference, FGIT 2011, in conjunction with GDC 2011, Jeju Island, Korea, in December 2011. The papers presented were carefully reviewed and selected from numerous submissions and focuse on the various aspects of multimedia, computer graphics and broadcasting.

Book Wireless Access Flexibility

Download or read book Wireless Access Flexibility written by Giuseppe Bianchi and published by Springer. This book was released on 2013-07-18 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the First International Workshop on Wireless Access Flexibility, WiFlex 2013, held in Kaliningrad, Russia, in September 2013. The 13 full papers presented were carefully reviewed and selected for inclusion in this volume. The papers describe the latest results and novel research ideas in the field of flexible wireless access architecture design opening the door for innovative solutions significantly improving network performance. The following topics are covered in this volume: 4G and beyond, local area networks, multi-hop networks, sensor networks.

Book Computers and Devices for Communication

Download or read book Computers and Devices for Communication written by Nikhil Ranjan Das and published by Springer Nature. This book was released on 2021-02-03 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected research papers presented at the 7th International Conference on Computers and Devices for Communication (CODEC 2019), held at the Department of Radio Physics and Electronic, University of Calcutta, India, on 19 – 20 December 2019. It includes recent research in the field of nanomaterials, devices and circuits; microwave and light wave technology; communication and space science; and computer applications and control.

Book Understanding LTE with MATLAB

Download or read book Understanding LTE with MATLAB written by Houman Zarrinkoub and published by John Wiley & Sons. This book was released on 2014-01-28 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to technical details related to the Physical Layer of the LTE standard with MATLAB® The LTE (Long Term Evolution) and LTE-Advanced are among the latest mobile communications standards, designed to realize the dream of a truly global, fast, all-IP-based, secure broadband mobile access technology. This book examines the Physical Layer (PHY) of the LTE standards by incorporating three conceptual elements: an overview of the theory behind key enabling technologies; a concise discussion regarding standard specifications; and the MATLAB® algorithms needed to simulate the standard. The use of MATLAB®, a widely used technical computing language, is one of the distinguishing features of this book. Through a series of MATLAB® programs, the author explores each of the enabling technologies, pedagogically synthesizes an LTE PHY system model, and evaluates system performance at each stage. Following this step-by-step process, readers will achieve deeper understanding of LTE concepts and specifications through simulations. Key Features: • Accessible, intuitive, and progressive; one of the few books to focus primarily on the modeling, simulation, and implementation of the LTE PHY standard • Includes case studies and testbenches in MATLAB®, which build knowledge gradually and incrementally until a functional specification for the LTE PHY is attained • Accompanying Web site includes all MATLAB® programs, together with PowerPoint slides and other illustrative examples Dr Houman Zarrinkoub has served as a development manager and now as a senior product manager with MathWorks, based in Massachusetts, USA. Within his 12 years at MathWorks, he has been responsible for multiple signal processing and communications software tools. Prior to MathWorks, he was a research scientist in the Wireless Group at Nortel Networks, where he contributed to multiple standardization projects for 3G mobile technologies. He has been awarded multiple patents on topics related to computer simulations. He holds a BSc degree in Electrical Engineering from McGill University and MSc and PhD degrees in Telecommunications from the Institut Nationale de la Recherche Scientifique, in Canada. www.wiley.com/go/zarrinkoub

Book LTE for 4G Mobile Broadband

Download or read book LTE for 4G Mobile Broadband written by Farooq Khan and published by Cambridge University Press. This book was released on 2009-03-26 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the new technologies of the LTE standard and their impact on system performance improvements with this practical guide.

Book LTE   The UMTS Long Term Evolution

Download or read book LTE The UMTS Long Term Evolution written by Stefania Sesia and published by John Wiley & Sons. This book was released on 2011-08-29 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Where this book is exceptional is that the reader will not just learn how LTE works but why it works" Adrian Scrase, ETSI Vice-President, International Partnership Projects Following on the success of the first edition, this book is fully updated, covering the latest additions to LTE and the key features of LTE-Advanced. This book builds on the success of its predecessor, offering the same comprehensive system-level understanding built on explanations of the underlying theory, now expanded to include complete coverage of Release 9 and the developing specifications for LTE-Advanced. The book is a collaborative effort of more than 40 key experts representing over 20 companies actively participating in the development of LTE, as well as academia. The book highlights practical implications, illustrates the expected performance, and draws comparisons with the well-known WCDMA/HSPA standards. The authors not only pay special attention to the physical layer, giving an insight into the fundamental concepts of OFDMA-FDMA and MIMO, but also cover the higher protocol layers and system architecture to enable the reader to gain an overall understanding of the system. Key New Features: Comprehensively updated with the latest changes of the LTE Release 8 specifications, including improved coverage of Radio Resource Management RF aspects and performance requirements Provides detailed coverage of the new LTE Release 9 features, including: eMBMS, dual-layer beamforming, user equipment positioning, home eNodeBs / femtocells and pico cells and self-optimizing networks Evaluates the LTE system performance Introduces LTE-Advanced, explaining its context and motivation, as well as the key new features including: carrier aggregation, relaying, high-order MIMO, and Cooperative Multi-Point transmission (CoMP). Includes an accompanying website containing a complete list of acronyms related to LTE and LTE-Advanced, with a brief description of each (http://www.wiley.com/go/sesia_theumts) This book is an invaluable reference for all research and development engineers involved in implementation of LTE or LTE-Advanced, as well as graduate and PhD students in wireless communications. Network operators, service providers and R&D managers will also find this book insightful.

Book A detailed Study of 4G in Wireless Communication  Looking insight in issues in OFDM

Download or read book A detailed Study of 4G in Wireless Communication Looking insight in issues in OFDM written by Neelam Dewangan and published by Anchor Academic Publishing (aap_verlag). This book was released on 2014-02-01 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a promising technique, OFDM has been widely used in emerging broadband communication systems, such as digital audio broadcasting (DAB), high-definition television (HDTV), and wireless local area network (IEEE 802.11a and HIPERLAN/2). However, as the OFDM signals are the sum of signals with random amplitude and phase, they are likely to have large PAPR that require a linear high-power- amplifier (HPA) with an extremely high dynamic range which is expensive and inefficient. Furthermore, any amplifier nonlinearity causes intermodulation products resulting in unwanted out-of-band power. A number of approaches have been proposed to deal with the PAPR problem, including amongst others, clipping, clipping-and-filtering (CF), coding, companding transform, active constellation extension (ACE), selected mapping (SLM), and partial transmit sequence (PTS). This book proposes an improvement in the selected mapping technique. The resulting scheme can also be applied to the multiple transmitting antenna cases. Further, it compares the simulation results to the existing techniques namely exponential companding transform, repeated clipping and filtering, and adaptive active constellation extension.

Book Cognitive Radio Networks

Download or read book Cognitive Radio Networks written by Yang Xiao and published by CRC Press. This book was released on 2008-12-24 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fueled by ongoing and increasing consumer demand, the explosive growth in spectrum-based communications continues to tax the finite resources of the available spectrum. One possible solution, Cognitive Radio Network (CRN), allows unlicensed users opportunistic access to licensed bands without interfering with existing users. Although some initial s

Book An Introduction to LTE

Download or read book An Introduction to LTE written by Christopher Cox and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to LTE explains the technology used by 3GPP Long Term Evolution. The book covers the whole of LTE, both the techniques used for radio communication between the base station and the mobile phone, and the techniques used for signalling communication and data transport in the evolved packet core. It avoids unnecessary detail, focussing instead on conveying a sound understanding of the entire system. The book is aimed at mobile telecommunication professionals, who want to understand what LTE is and how it works. It is invaluable for engineers who are working on LTE, notably those who are transferring from other technologies such as UMTS and cdma2000, those who are experts in one part of LTE but who want to understand the system as a whole, and those who are new to mobile telecommunications altogether. It is also relevant to those working in non technical roles, such as project managers, marketing executives and intellectual property consultants. On completing the book, the reader will have a clear understanding of LTE, and will be able to tackle the more specialised books and the 3GPP specifications with confidence. Key features - Covers the latest developments in release 10 of the 3GPP specifications, including the new capabilities of LTE-Advanced Includes references to individual sections of the 3GPP specifications, to help readers understand the principles of each topic before going to the specifications for more detailed information Requires no previous knowledge of mobile telecommunications, or of the mathematical techniques that LTE uses for radio transmission and reception

Book Signal Processing for 5G

Download or read book Signal Processing for 5G written by Fa-Long Luo and published by John Wiley & Sons. This book was released on 2016-10-17 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and invaluable guide to 5G technology, implementation and practice in one single volume. For all things 5G, this book is a must-read. Signal processing techniques have played the most important role in wireless communications since the second generation of cellular systems. It is anticipated that new techniques employed in 5G wireless networks will not only improve peak service rates significantly, but also enhance capacity, coverage, reliability , low-latency, efficiency, flexibility, compatibility and convergence to meet the increasing demands imposed by applications such as big data, cloud service, machine-to-machine (M2M) and mission-critical communications. This book is a comprehensive and detailed guide to all signal processing techniques employed in 5G wireless networks. Uniquely organized into four categories, New Modulation and Coding, New Spatial Processing, New Spectrum Opportunities and New System-level Enabling Technologies, it covers everything from network architecture, physical-layer (down-link and up-link), protocols and air interface, to cell acquisition, scheduling and rate adaption, access procedures and relaying to spectrum allocations. All technology aspects and major roadmaps of global 5G standard development and deployments are included in the book. Key Features: Offers step-by-step guidance on bringing 5G technology into practice, by applying algorithms and design methodology to real-time circuit implementation, taking into account rapidly growing applications that have multi-standards and multi-systems. Addresses spatial signal processing for 5G, in particular massive multiple-input multiple-output (massive-MIMO), FD-MIMO and 3D-MIMO along with orbital angular momentum multiplexing, 3D beamforming and diversity. Provides detailed algorithms and implementations, and compares all multicarrier modulation and multiple access schemes that offer superior data transmission performance including FBMC, GFDM, F-OFDM, UFMC, SEFDM, FTN, MUSA, SCMA and NOMA. Demonstrates the translation of signal processing theories into practical solutions for new spectrum opportunities in terms of millimeter wave, full-duplex transmission and license assisted access. Presents well-designed implementation examples, from individual function block to system level for effective and accurate learning. Covers signal processing aspects of emerging system and network architectures, including ultra-dense networks (UDN), software-defined networks (SDN), device-to-device (D2D) communications and cloud radio access network (C-RAN).

Book Single Carrier FDMA

Download or read book Single Carrier FDMA written by Hyung G. Myung and published by John Wiley & Sons. This book was released on 2008-11-20 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single Carrier Frequency Division Multiple Access (SC-FDMA) is a novel method of radio transmission under consideration for deployment in future cellular systems; specifically, in 3rd Generation Partnership Project Long Term Evolution (3GPP LTE) systems. SC-FDMA has drawn great attention from the communications industry as an attractive alternative to Orthogonal Frequency Division Multiple Access (OFDMA). Introduction to Single Carrier FDMA places SC-FDMA in the wider context of wireless communications, providing the reader with an in-depth tutorial on SC-FDMA technology. The book introduces the reader to this new multiple access technique that utilizes single carrier modulation along with orthogonal frequency multiplexing and frequency domain equalization, plus its applications in communications settings. It considers the similarities with and differences from orthogonal frequency division modulation, multiplexing, and multiple access used extensively in cellular, broadcasting, and digital subscriber loop applications. Particular reference is made to the peak power characteristics of an SC-FDMA signal as an added advantage over OFDMA. Provides an extensive overview of the principles of SC-FDMA and its relation to other transmission techniques. Explains how the details of a specific implementation influence the tradeoffs among various figures of merit. Describes in detail the configuration of the SC-FDMA uplink transmission scheme published by 3GPP. Features link level simulation of an uplink SC-FDMA system using MATLAB. This is an essential text for industry engineers who are researching and developing 3GPP LTE systems. It is suitable for engineers designing wireless network equipment, handsets, data cards, modules, chipsets, and test equipment as well as those involved in designing LTE infrastructure. It would also be of interest to academics, graduate students, and industry researchers involved in advanced wireless communications, as well as business analysts who follow the cellular market.