Download or read book Engineering with Fibre Polymer Laminates written by P.C. Powell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has its recent origins in a Master's course in Polymer Engineering at Manchester. It is a rather extended version of composite mechanics covered in about twenty five hours within a two-week intensive programme on Fibre Polymer Composites which also formed part of the UK Government and Industry-sponsored Integrated Graduate Development Scheme in Polymer Engineering. The material has also been used in other courses, and in teaching to students of engineering and of polymer technology both in the UK and in mainland Europe. There are already many books describing the analysis of and mechanical behaviour of polymer/fibre composites, so why write another? Most of these excellent books appear to be aimed at readers who already have a substantial understanding of stress analysis for linear elastic isotropic materials, who are thoroughly at home with mathematical analysis, and who seem often not to need much of the reassurance which numerical examples and illustrated applications can offer. In teaching the mechanics of composites to many groups of scientists, technologists and engineers, I have found that most of them need and seek an introduction before consulting the advanced texts. This book is intended to fill the gap. Throughout this text is interspersed a substantial range of examples to bring out the practical implications of the basic principles, and a wide range of problems (with outline solutions) to test the reader and extend understanding.

Download or read book Analysis of Failure in Fiber Polymer Laminates written by Martin Knops and published by Springer Science & Business Media. This book was released on 2008-04-05 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by Puck's pupil and appointed successor Martin Knops, this book presents Alfred Puck ́s failure model, which, among several other theories, predicts fracture limits best and describes the failure phenomena in FRP most realistically – as confirmed within the "World-wide Failure Exercise". Using Puck ́s model the composite engineer can follow the gradual failure process in a laminate and deduce from the results of the analysis how to improve the laminate design.

Download or read book Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures written by J. Hult and published by Springer. This book was released on 2014-05-04 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book aims at giving an overview of current methods in engineering mechanics of FRP components and structures as well as hybrid components and structures. Main emphasis is on basic micro and macro mechanics of laminates. Long as well as short fibre composites are studied, and criteria for different kinds of rupture are treated. Micromechanical considerations for material characterization and mechanisms of static ductile and brittle rupture are studied, as well as FRP structures under thermal and dynamic loading programs. Optimum design and manufacture situations are described as well. The book makes designers familiar with the opportunities and limitations of modern high quality fibre composites. Practical engineering applications of the described analytical and numerical methods are also presented.

Download or read book Impact Behavior of Fibre Reinforced Laminates written by Kalyan Kumar Singh and published by Springer Nature. This book was released on 2022-02-14 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: ^ p="" This highly informative and carefully presented volume highlights the impact behavior of fibre reinforced polymer composites. It begins with a preliminary focus on FRP materials, fabrication processes, micro- and macro- mechanics to calculate FRP laminates properties, damage nodes associated with FRP composites under different loadings. It provides a simple and unified approach to cover aspects of FRP composites behavior with low velocity impact loading. This book offers a valuable guide for those who wish to develop deeper insights into weaving architectures, stacking sequences, fabrication processes, general damage modes associated with FRP composites. It is a useful volume for students, academia and industry alike. ^

Download or read book Handbook of Polymer Composites for Engineers written by L C Hollaway and published by Elsevier. This book was released on 1994-01-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the engineer to fibres and polymer matrices, which are the components of the polymer composites for structural engineering. The authors also provide a simple guide, in tabular form, to the principal fabrication techniques, the basic design formulae, and the methods for structural composites systems and connections.

Download or read book Glass Fibre Reinforced Polymer Composites written by Jalumedi Babu and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-05-05 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineered composites materials display superior properties to pristine materials. Glass fibres have been used for years in the production of light weight composites. This book is a much needed update as to the processing methods and technologies present in the manufacturing of GFRP. Coverage of machining, cutting, tools, and thermal loads are discussed. Ideal for researchers in academia and industry.

Download or read book Analysis of Failure in Fiber Polymer Laminates written by Martin Knops and published by Springer Science & Business Media. This book was released on 2008-07-31 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by Puck's pupil and appointed successor Martin Knops, this book presents Alfred Puck ́s failure model, which, among several other theories, predicts fracture limits best and describes the failure phenomena in FRP most realistically – as confirmed within the "World-wide Failure Exercise". Using Puck ́s model the composite engineer can follow the gradual failure process in a laminate and deduce from the results of the analysis how to improve the laminate design.

Download or read book Engineering Composite Materials written by Bryan Harris and published by . This book was released on 1986 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainable Aviation Technology and Operations written by Roberto Sabatini and published by John Wiley & Sons. This book was released on 2023-09-06 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Aviation Technology and Operations Comprehensively covers research and development initiatives to enhance the environmental sustainability of the??aviation sector Sustainable Aviation Technology and Operations provides a comprehensive and timely outlook of recent research advances in aeronautics and air transport, with emphasis on both long-term sustainable development goals and current achievements. This book discusses some of the most promising advances in aircraft technologies, air traffic management and systems engineering methodologies for sustainable aviation. The topics covered include: propulsion, aerodynamics, avionics, structures, materials, airspace management, biofuels and sustainable lifecycle management. The physical processes associated with various aircraft emissions — including air pollutants, noise and contrails — are presented to support the development of computational models for aircraft design, flight path optimization and environmental impact assessment. Relevant advances in systems engineering and lifecycle management processes are also covered, bridging some of the existing gaps between academic research and industry best practices. A collection of research case studies complements the book, highlighting opportunities for a timely uptake of the most promising technologies, towards a more efficient and environmentally sustainable aviation future. Key features: Contains important research and industry relevant contributions from world-class experts. Addresses recent advances in aviation sustainability including multidisciplinary design approaches and multi-objective operational optimisation methods. Includes a number of research case studies, addressing propulsion, aerostructures, alternative aviation fuels, avionics, air traffic management, and sustainable lifecycle management solutions. Sustainable Aviation Technology and Operations is an excellent book for aerospace engineers, aviation scientists, researchers and graduate students involved in the field.

Download or read book Design Procedures for the Use of Composites in Strengthening of Reinforced Concrete Structures written by Carlo Pellegrino and published by Springer. This book was released on 2015-08-25 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyses the current knowledge on structural behaviour of RC elements and structures strengthened with composite materials (experimental, analytical and numerical approaches for EBR and NSM), particularly in relation to the above topics, and the comparison of the predictions of the current available codes/recommendations/guidelines with selected experimental results. The book shows possible critical issues (discrepancies, lacunae, relevant parameters, test procedures, etc.) related to current code predictions or to evaluate their reliability, in order to develop more uniform methods and basic rules for design and control of FRP strengthened RC structures. General problems/critical issues are clarified on the basis of the actual experiences, detect discrepancies in existing codes, lacunae in knowledge and, concerning these identified subjects, provide proposals for improvements. The book will help to contribute to promote and consolidate a more qualified and conscious approach towards rehabilitation and strengthening existing RC structures with composites and their possible monitoring.

Download or read book Reinforced Polymer Composites written by Pramendra K. Bajpai and published by John Wiley & Sons. This book was released on 2019-08-13 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art processing techniques and readily applicable knowledge on processing of polymer composites The book presents the advancement in the field of reinforced polymer composites with emphasis on manufacturing techniques, including processing of different reinforced polymer composites, secondary processing of green composites, and post life cycle processing. It discusses the advantages and limitations of each processing method and the effect of processing parameters on the overall performance of the composites. Characterization and applications of reinforced polymer composites are also introduced. Reinforced Polymer Composites: Processing, Characterization and Post Life Cycle Assessment starts off by providing readers with a comprehensive overview of the field. It then introduces them to the fabrication of both short fiber/filler reinforced polymer composites and laminated reinforced polymer composites. Next, it takes them through the processing of polymer-based nanocomposites; the many advances in curing methods of reinforced polymer composites; and post life cycle processing, re-processing, and disposal mechanisms of reinforced polymer composites. Numerous other chapters cover: synthetic versus natural fiber reinforced plastics; characterization techniques of reinforced plastics; friction and wear analysis of reinforced plastics; secondary processing of reinforced plastics; and applications of reinforced plastics. -Presents the latest development in materials, processing, and characterization techniques, as well as applications of reinforced polymer composites -Guides users in choosing the best processing methods to produce polymer composites and successfully manufacture high quality products -Assists academics in sorting out basic research questions and helps those in industry manufacture products, such as marine, automotive, aerospace, and sport goods Reinforced Polymer Composites: Processing, Characterization and Post Life Cycle Assessment is an important book for materials scientists, polymer chemists, chemical engineers, process engineers, and anyone involved in the chemical or plastics technology industry.

Download or read book Failure Criteria in Fibre Reinforced Polymer Composites written by M. Hinton and published by Elsevier. This book was released on 2004-08-31 with total page 1276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber reinforced polymer composites are an extremely broad and versatile class of material.Their high strength coupled with lightweight leads to their use wherever structural efficiency is at a premium. Applications can be found in aircraft, process plants, sporting goods and military equipment. However they are heterogeneous in construction and antisotropic, which makes making strength prediction extremely difficult especially compared to that of a metal. This book brings together the results of a 12year worldwide failure exercise encompassing 19 theories in a single volume. Each contributor describes their own theory and employs it to solve 14 challenging problems. The accuracy of predictions and the performance of the theories are assessed and recommendations made on the uses of the theories in engineering design. All the necessary information is provided for the methodology to be readily employed for validating and benchmarking new theories as they emerge. Brings together 19 failure theories, with many application examples. Compares the leading failure theories with one another and with experimental data Failure to apply these theories could result in potentially unsafe designs or over design.

Download or read book Principles of Polymer Systems Sixth Edition written by Ferdinand Rodriguez and published by CRC Press. This book was released on 2014-12-09 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining a balance between depth and breadth, the Sixth Edition of Principles of Polymer Systems continues to present an integrated approach to polymer science and engineering. A classic text in the field, the new edition offers a comprehensive exploration of polymers at a level geared toward upper-level undergraduates and beginning graduate students. Revisions to the sixth edition include: A more detailed discussion of crystallization kinetics, strain-induced crystallization, block copolymers, liquid crystal polymers, and gels New, powerful radical polymerization methods Additional polymerization process flow sheets and discussion of the polymerization of polystyrene and poly(vinyl chloride) New discussions on the elongational viscosity of polymers and coarse-grained bead-spring molecular and tube models Updated information on models and experimental results of rubber elasticity Expanded sections on fracture of glassy and semicrystalline polymers New sections on fracture of elastomers, diffusion in polymers, and membrane formation New coverage of polymers from renewable resources New section on X-ray methods and dielectric relaxation All chapters have been updated and out-of-date material removed. The text contains more theoretical background for some of the fundamental concepts pertaining to polymer structure and behavior, while also providing an up-to-date discussion of the latest developments in polymerization systems. Example problems in the text help students through step-by-step solutions and nearly 300 end-of-chapter problems, many new to this edition, reinforce the concepts presented.

Download or read book Durability Analysis of Structural Composite Systems written by Albert H. Cardon and published by CRC Press. This book was released on 1996-01-01 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Durability analysis can be defined as the prediction methodology of safe residual behaviour after a given life time under a complex mechanical loading history in combination with a program of environmental variations. This was, and is a central problem for the reliability of structural components whatever are the basic material systems. With composite systems, combination of different materials in interaction, an integrated material structure design becomes possible. If one of the phases is a polymer, the composite system has time dependent properties and as consequence durability analysis has to be performed taking into account the internal time factor in combination with strong influences from temperature changes and moisture diffusion. Insurance companies need information on durability and reliability in order to cover the risks, and in the event of failure lawyers have to arrive at an agreement om the responsibilites of the different actors involved in the constructiion. This book is an overview of the state of the different aspects of safe structural integrity for a given lifetime of composite structures, with special emphasis on polymer matrix composites. It is of interest for scientists and engineers involved in composites and for designers of composite structural components.

Download or read book Microstructural Characterisation of Fibre Reinforced Composites written by John Summerscales and published by CRC Press. This book was released on 1998-08-18 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past 50 years, great progress has been made in developing artificial fiber-reinforced composite materials, generally using filaments with microscopic diameters. An array of reinforcement forms can be used in commercial applications - with the microstructure being a critical factor in realizing the required properties in a material. Microstructural Characterisation of Fibre-Reinforced Composites comprehensively examines the application of advanced microstructural characterization techniques to fiber-reinforced composites.

Download or read book Seismic Retrofit of Existing Reinforced Concrete Buildings written by Stelios Antoniou and published by John Wiley & Sons. This book was released on 2023-04-24 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Retrofit of Existing Reinforced Concrete Buildings Understand the complexities and challenges of retrofitting building infrastructure Across the world, buildings are gradually becoming structurally unsound. Many were constructed before seismic load capacity was a mandatory component of building standards, and were often built with low-quality materials or using unsafe construction practices. Many more are simply aging, with materials degrading, and steel corroding. As a result, efforts are ongoing to retrofit existing structures, and to develop new techniques for assessing and enhancing seismic load capacity in order to create a safer building infrastructure worldwide. Seismic Retrofit of Existing Reinforced Concrete Buildings provides a thorough book-length discussion of these techniques and their applications. Balancing theory and practice, the book provides engineers with a broad base of knowledge from which to approach real-world seismic assessments and retrofitting projects. It incorporates knowledge and experience frequently omitted from the building design process for a fuller account of this critical engineering subfield. Seismic Retrofit of Existing Reinforced Concrete Buildings readers will also find: Detailed treatment of each available strengthening technique, complete with advantages and disadvantages In-depth guidelines to select a specific technique for a given building type and/or engineering scenario Step-by-step guidance through the assessment/retrofitting process Seismic Retrofit of Existing Reinforced Concrete Buildings is an ideal reference for civil and structural engineering professionals and advanced students, particularly those working in seismically active areas.

Download or read book Biopolymers for Medical Applications written by Juan M. Ruso and published by CRC Press. This book was released on 2017-02-17 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an experimental and computational account of the applications of biopolymers in the field of medicine. Biopolymers are macromolecules produced by living systems, such as proteins, polypeptides, nucleic acids, and polysaccharides. Their advantages over polymers produced using synthetic chemistry include: diversity, abundance, relatively low cost, and sustainability. This book explains techniques for the production of different biodevices, such as scaffolds, hydrogels, functional nanoparticles, microcapsules, and nanocapsules. Furthermore, developments in nanodrug delivery, gene therapy, and tissue engineering are described.