Download or read book Engineering Separations Unit Operations for Nuclear Processing written by Reid Peterson and published by CRC Press. This book was released on 2019-11-15 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Separations Unit Operations for Nuclear Processing provides insight into the fundamentals of separations in nuclear materials processing not covered in typical texts. This book integrates fuel cycle and waste processing into a single, coherent approach, demonstrating that the principles from one field can and should be applied to the other. It provides historical perspectives on nuclear materials processing, current assessment and challenges, and how past challenges were overcome. It also provides understanding of the engineering principles associated with handling nuclear materials. This book is aimed at researchers, graduate students, and professionals in the fields of chemical engineering, mechanical engineering, nuclear engineering, and materials engineering.
Download or read book Engineering Separations Unit Operations for Nuclear Processing written by Reid Peterson and published by CRC Press. This book was released on 2019-11-15 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Separations Unit Operations for Nuclear Processing provides insight into the fundamentals of separations in nuclear materials processing not covered in typical texts. This book integrates fuel cycle and waste processing into a single, coherent approach, demonstrating that the principles from one field can and should be applied to the other. It provides historical perspectives on nuclear materials processing, current assessment and challenges, and how past challenges were overcome. It also provides understanding of the engineering principles associated with handling nuclear materials. This book is aimed at researchers, graduate students, and professionals in the fields of chemical engineering, mechanical engineering, nuclear engineering, and materials engineering.
Download or read book Advanced Separation Techniques for Nuclear Fuel Reprocessing and Radioactive Waste Treatment written by Kenneth L Nash and published by Elsevier. This book was released on 2011-03-15 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced separations technology is key to closing the nuclear fuel cycle and relieving future generations from the burden of radioactive waste produced by the nuclear power industry. Nuclear fuel reprocessing techniques not only allow for recycling of useful fuel components for further power generation, but by also separating out the actinides, lanthanides and other fission products produced by the nuclear reaction, the residual radioactive waste can be minimised. Indeed, the future of the industry relies on the advancement of separation and transmutation technology to ensure environmental protection, criticality-safety and non-proliferation (i.e., security) of radioactive materials by reducing their long-term radiological hazard. Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment provides a comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatment. Part one covers the fundamental chemistry, engineering and safety of radioactive materials separations processes in the nuclear fuel cycle, including coverage of advanced aqueous separations engineering, as well as on-line monitoring for process control and safeguards technology. Part two critically reviews the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment. The section includes discussions of advanced PUREX processes, the UREX+ concept, fission product separations, and combined systems for simultaneous radionuclide extraction. Part three details emerging and innovative treatment techniques, initially reviewing pyrochemical processes and engineering, highly selective compounds for solvent extraction, and developments in partitioning and transmutation processes that aim to close the nuclear fuel cycle. The book concludes with other advanced techniques such as solid phase extraction, supercritical fluid and ionic liquid extraction, and biological treatment processes. With its distinguished international team of contributors, Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment is a standard reference for all nuclear waste management and nuclear safety professionals, radiochemists, academics and researchers in this field. A comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatment Details emerging and innovative treatment techniques, reviewing pyrochemical processes and engineering, as well as highly selective compounds for solvent extraction Discusses the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment
Download or read book Separation Process Essentials written by Alan M. Lane and published by CRC Press. This book was released on 2019-11-07 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation Process Essentials provides an interactive approach for students to learn the main separation processes (distillation, absorption, stripping, and solvent extraction) using material and energy balances with equilibrium relationships, while referring readers to other more complete works when needed. Membrane separations are included as an example of non-equilibrium processes. This book reviews and builds on material learned in the first chemical engineering courses such as Material and Energy Balances and Thermodynamics as applied to separations. It relies heavily on example problems, including completely worked and explained problems followed by "Try This At Home" guided examples. Most examples have accompanying downloadable Excel spreadsheet simulations. The book also offers a complementary website, http://separationsbook.com, with supplementary material such as links to YouTube tutorials, practice problems, and the Excel simulations. This book is aimed at second and third year undergraduate students in Chemical engineering, as well as professionals in the field of Chemical engineering, and can be used for a one semester course in separation processes and unit operations.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1983 with total page 1468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Wastes written by National Research Council and published by National Academies Press. This book was released on 1996-02-23 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disposal of radioactive waste from nuclear weapons production and power generation has caused public outcry and political consternation. Nuclear Wastes presents a critical review of some waste management and disposal alternatives to the current national policy of direct disposal of light water reactor spent fuel. The book offers clearcut conclusions for what the nation should do today and what solutions should be explored for tomorrow. The committee examines the currently used "once-through" fuel cycle versus different alternatives of separations and transmutation technology systems, by which hazardous radionuclides are converted to nuclides that are either stable or radioactive with short half-lives. The volume provides detailed findings and conclusions about the status and feasibility of plutonium extraction and more advanced separations technologies, as well as three principal transmutation concepts for commercial reactor spent fuel. The book discusses nuclear proliferation; the U.S. nuclear regulatory structure; issues of health, safety and transportation; the proposed sale of electrical energy as a means of paying for the transmutation system; and other key issues.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: NSA is a comprehensive collection of international nuclear science and technology literature for the period 1948 through 1976, pre-dating the prestigious INIS database, which began in 1970. NSA existed as a printed product (Volumes 1-33) initially, created by DOE's predecessor, the U.S. Atomic Energy Commission (AEC). NSA includes citations to scientific and technical reports from the AEC, the U.S. Energy Research and Development Administration and its contractors, plus other agencies and international organizations, universities, and industrial and research organizations. References to books, conference proceedings, papers, patents, dissertations, engineering drawings, and journal articles from worldwide sources are also included. Abstracts and full text are provided if available.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Advances in Nuclear Engineering written by John Ray Dunning and published by . This book was released on 1957 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Separation Technologies for the Industries of the Future written by National Research Council and published by National Academies Press. This book was released on 1999-02-08 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processesâ€"or processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixtureâ€"are essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.
Download or read book Engineering for Nuclear Fuel Reprocessing written by Justin T. Long and published by . This book was released on 1967 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Food Processing Technology written by P J Fellows and published by Woodhead Publishing. This book was released on 2016-10-04 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Processing Technology: Principles and Practice, Fourth Edition, has been updated and extended to include the many developments that have taken place since the third edition was published. The new edition includes an overview of the component subjects in food science and technology, processing stages, important aspects of food industry management not otherwise considered (e.g. financial management, marketing, food laws and food industry regulation), value chains, the global food industry, and over-arching considerations (e.g. environmental issues and sustainability). In addition, there are new chapters on industrial cooking, heat removal, storage, and distribution, along with updates on all the remaining chapters. This updated edition consolidates the position of this foundational book as the best single-volume introduction to food manufacturing technologies available, remaining as the most adopted standard text for many food science and technology courses. Updated edition completely revised with new developments on all the processing stages and aspects of food industry management not otherwise considered (e.g. financial management, marketing, food laws, and food industry regulation), and more Introduces a range of processing techniques that are used in food manufacturing Explains the key principles of each process, including the equipment used and the effects of processing on micro-organisms that contaminate foods Describes post-processing operations, including packaging and distribution logistics Includes extra textbook elements, such as videos and calculations slides, in addition to summaries of key points in each chapter
Download or read book Selected Papers from the Nuclear Engineering and Science Congress written by and published by . This book was released on 1957 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1970-04 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Register written by University of California, Berkeley and published by . This book was released on 1967 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Research Agenda for Transforming Separation Science written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-10-30 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation science plays a critical role in maintaining our standard of living and quality of life. Many industrial processes and general necessities such as chemicals, medicines, clean water, safe food, and energy sources rely on chemical separations. However, the process of chemical separations is often overlooked during product development and this has led to inefficiency, unnecessary waste, and lack of consensus among chemists and engineers. A reevaluation of system design, establishment of standards, and an increased focus on the advancement of separation science are imperative in supporting increased efficiency, continued U.S. manufacturing competitiveness, and public welfare. A Research Agenda for Transforming Separation Science explores developments in the industry since the 1987 National Academies report, Separation and Purification: Critical Needs and Opportunities. Many needs stated in the original report remain today, in addition to a variety of new challenges due to improved detection limits, advances in medicine, and a recent emphasis on sustainability and environmental stewardship. This report examines emerging chemical separation technologies, relevant developments in intersecting disciplines, and gaps in existing research, and provides recommendations for the application of improved separation science technologies and processes. This research serves as a foundation for transforming separation science, which could reduce global energy use, improve human and environmental health, and advance more efficient practices in various industries.
