Download or read book Engineering Properties of Foods Fourth Edition written by M. A. Rao and published by . This book was released on 2014-01-01 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Preface We are pleased to present the fourth edition of Engineering Properties of Foods. During the last few years, food structure/micro-structure has remained a subject of research interest. Furthermore, significant developments have taken place in the area of high-pressure processing (HPP), and the process has been approved by the Food and Drug Administration (FDA) for pasteurization of food. Kinetic data related to HPP play a crucial role for validating the pressure-assisted pasteurization. On the basis of these developments, three new chapters: "Microstructural Properties of Foods," "Glass Transition in Foods," and "Kinetics and Process Design for High-Pressure Processing" have been added in the fourth edition. Most of the existing chapters were revised to include recent developments in each subject. The chapter on colorimetric properties of food was removed from the earlier edition. Data on physical, chemical, and biological properties have been presented in the book to illustrate their relevance and practical importance. We have added Dr. Jasim Ahmed as a coeditor to help with this rather large undertaking. In looking for experts on topics, we have also made an effort to expand the international participation of authors. We have made a special effort to follow a consistent format for the chapters so that readers can follow each chapter easily. Thus, each chapter includes an introduction, property definition, measurement procedure, modeling, representative data compilation, and applications"--
Download or read book Engineering Properties of Foods Fourth Edition written by M.A. Rao and published by CRC Press. This book was released on 2014-04-22 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been nearly a decade since the third edition of Engineering Properties of Foods was published, and food structure/microstructure remains a subject of research interest. In fact, significant developments have taken place in the area of high pressure processing (HPP), which has been approved for pasteurization of food by the Food and Drug Administration. Kinetic data related to HPP have proven important for validation of pressure-assisted pasteurization. Due to these developments, three new chapters have been added to the Fourth Edition: Food Microstructure Analysis Glass Transition in Foods Kinetics and Process Design for High-Pressure Processing The text focuses on elucidating the engineering aspects of food properties and their variations, supplemented by representative data. Chapters have been updated and revised to include recent developments. The book presents data on physical, chemical, and biological properties, illustrating their relevance and practical importance. The topics range from surface properties, rheological properties, and thermal properties to thermodynamic, dielectric, and gas exchange properties. The chapters follow a consistent format for ease of use. Each chapter contains an introduction, food property definition, measurement procedure, modeling, representative data compilation, and applications.
Download or read book Engineering Properties of Food Second Edition written by M.A. Rao and published by CRC Press. This book was released on 1994-09-29 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work defines food properties, provides the neccessary theoretical background for each property and evaluates the usefulness of each property in the design and operation of important food processing equipment. This second edition offers new chapters on the thermal properties of frozen foods plus information to estimate heat and mass transport fluxes, dielectric properties and their predictive models, and colourimetric properties and methods of measurement.;A special price is available on request for college or university bookstores requiring five or more copies.
Download or read book Engineering Properties of Foods written by M.A. Rao and published by CRC Press. This book was released on 2014-10-31 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten years have passed since this reference's last edition - making Engineering Properties of Foods, Third Edition the must-have resource for those interested in food properties and their variations. Defined are food properties and the necessary theoretical background for each. Also evaluated is the usefulness of each property i
Download or read book Engineering Properties of Foods Third Edition written by M.A. Rao and published by CRC Press. This book was released on 2005-04-26 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten years have passed since this reference’s last edition – making Engineering Properties of Foods, Third Edition the must-have resource for those interested in food properties and their variations. Defined are food properties and the necessary theoretical background for each. Also evaluated is the usefulness of each property in the design and operation of important food processing equipment. Of particular importance is that this latest edition offers seven new chapters – many of which introduce information on groundbreaking new properties. These chapters, along with the inclusion of two revised chapters from previous editions, result in a text that offers nine out of sixteen chapters of new material. This long-awaited third edition concentrates on a clear, comprehensive explanation of properties and their variations supplemented by abundant, representative information. By providing data in such a succinct and cogent manner, this comprehensive reference allows you to fully immerse in its depth and breadth of scope, while fully holding interest in the text.
Download or read book Introduction to Food Engineering written by R. Paul Singh and published by Gulf Professional Publishing. This book was released on 2001-06-29 with total page 787 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food engineering is a required class in food science programs, as outlined by the Institute for Food Technologists (IFT). The concepts and applications are also required for professionals in food processing and manufacturing to attain the highest standards of food safety and quality.The third edition of this successful textbook succinctly presents the engineering concepts and unit operations used in food processing, in a unique blend of principles with applications. The authors use their many years of teaching to present food engineering concepts in a logical progression that covers the standard course curriculum. Each chapter describes the application of a particular principle followed by the quantitative relationships that define the related processes, solved examples, and problems to test understanding.The subjects the authors have selected to illustrate engineering principles demonstrate the relationship of engineering to the chemistry, microbiology, nutrition and processing of foods. Topics incorporate both traditional and contemporary food processing operations.
Download or read book Physical Properties of Foods written by Serpil Sahin and published by Springer Science & Business Media. This book was released on 2007-05-27 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a fundamental understanding of physical properties of foods. It is the first textbook in this area and combines engineering concepts and physical chemistry. Basic definitions and principles of physical properties are discussed as well as the importance of physical properties in the food industry and measurement methods. In addition, recent studies in physical properties are summarized. The material presented is helpful for students to understand the relationship between physical and functional properties of raw, semi-finished, and processed food in order to obtain products with desired shelf-life and quality.
Download or read book Food Properties Handbook written by M. Shafiur Rahman and published by CRC Press. This book was released on 2009-05-28 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dramatically restructured, more than double in size, the second edition of the Food Properties Handbook has been expanded from seven to 24 chapters. In the more than ten years since the publication of the internationally acclaimed and bestselling first edition, many changes have taken place in the approaches used to solve problems in food preservat
Download or read book Engineering Properties of Food Materials written by and published by . This book was released on 1981 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Food Engineering written by Paul Singh and published by Academic Press. This book was released on 2012-12-02 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Food Engineering deals with the engineering concepts in food processing employing a unit operations approach. The book focuses on mass and energy balances, fluid flow, energy utilization, refrigeration, heat transfer, food freezing, evaporation, dehydration, and psychometrics. It is in line with primary topics recommended by the Institute of Food Technologists of the U.S.A. The text reviews some concepts related to food science such as the equation of state and perfect gas law, laws of thermodynamics, and conservation of mass. The book also discusses the transport of liquid foods and the three types of utilities used in food processing: 1) steam generation and utilization; 2) natural gas utilization; and 3) electric power utilization. The text explains how to determine the properties of food and the different approaches that can be used to obtain the food's thermal properties prior to using the proper heat-exchange equipment. Food preservation also involves freezing (direct or indirect contact systems), evaporation, dehydration, and psychometrics (involving thermodynamic properties of gas-vapor mixtures). The book is suitable for nutritionists, food technologists, advanced under-graduate and beginning graduate students in food science and technology, and professionals whose works are in the food processing, research, and preservation industry.
Download or read book Fundamentals of Food Process Engineering written by Romeo T. Toledo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten years after the publication of the first edition of Fundamentals of Food Process Engineering, there have been significant changes in both food science education and the food industry itself. Students now in the food science curric ulum are generally better prepared mathematically than their counterparts two decades ago. The food science curriculum in most schools in the United States has split into science and business options, with students in the science option following the Institute of Food Technologists' minimum requirements. The minimum requirements include the food engineering course, thus students en rolled in food engineering are generally better than average, and can be chal lenged with more rigor in the course material. The food industry itself has changed. Traditionally, the food industry has been primarily involved in the canning and freezing of agricultural commodi ties, and a company's operations generally remain within a single commodity. Now, the industry is becoming more diversified, with many companies involved in operations involving more than one type of commodity. A number of for mulated food products are now made where the commodity connection becomes obscure. The ability to solve problems is a valued asset in a technologist, and often, solving problems involves nothing more than applying principles learned in other areas to the problem at hand. A principle that may have been commonly used with one commodity may also be applied to another commodity to produce unique products.
Download or read book Introduction to Food Engineering written by R. Paul Singh and published by Elsevier. This book was released on 2023-12-19 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Food Engineering, Sixth Edition brings a much more in-depth and didactic presentation of classic food engineering topics, such as the relationship of engineering to the chemistry, microbiology, nutrition and processing of foods. The book brings more quantitative analyses and problem-solving content, adding more descriptive topics at the end of each chapter to facilitate teaching and student comprehension. Topics cover engineering fundamentals, principles of food processing and preservation operations, solids handling, microbial bioreactions, inactivation and inhibition of microorganisms, and a brief Introduction to economic considerations and regulations. This approach facilitates comprehensive learning that has proven valuable beyond the classroom as a lifetime professional reference. - Numerical examples are reworked using the latest data on fluid properties obtained from the National Institute of Standards and Technology - Quantitative examples describe the use of earth-friendly refrigerants in the cold chain - Design procedures relevant to emerging electrotechnologies in food processing - New content on resource sustainability for designing future food processing systems that support circular bioeconomy - Description of quantitative approaches to food processing to assist practicing professionals in the food industry
Download or read book Physical Properties of Foods written by Ignacio Arana and published by CRC Press. This book was released on 2012-02-27 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: With higher food quality in increasing demand by consumers, there is continuous pressure on food engineers to meet market needs. One of the critical challenges is to use modern technology and knowledge to develop new processes for improving food quality. Given the global food marketplace, there is also a greater need for a means of objectively clas
Download or read book Handbook of Food Engineering written by Dennis R. Heldman and published by CRC Press. This book was released on 2018-12-19 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the complexity of the food supply system increases, the focus on processes used to convert raw food materials and ingredients into consumer food products becomes more important. The Handbook of Food Engineering, Third Edition, continues to provide students and food engineering professionals with the latest information needed to improve the efficiency of the food supply system. As with the previous editions, this book contains the latest information on the thermophysical properties of foods and kinetic constants needed to estimate changes in key components of foods during manufacturing and distribution. Illustrations are used to demonstrate the applications of the information to process design. Researchers should be able to use the information to pursue new directions in process development and design, and to identify future directions for research on the physical properties of foods and kinetics of changes in the food throughout the supply system. Features Covers basic concepts of transport and storage of liquids and solids, heating and cooling of foods, and food ingredients New chapter covers nanoscale science in food systems Includes chapters on mass transfer in foods and membrane processes for liquid concentration and other applications Discusses specific unit operations on freezing, concentration, dehydration, thermal processing, and extrusion The first four chapters of the Third Edition focus primarily on the properties of foods and food ingredients with a new chapter on nanoscale applications in foods. Each of the eleven chapters that follow has a focus on one of the more traditional unit operations used throughout the food supply system. Major revisions and/or updates have been incorporated into chapters on heating and cooling processes, membrane processes, extrusion processes, and cleaning operations.
Download or read book Food Properties and Computer Aided Engineering of Food Processing Systems written by R.P. Singh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food properties, whether they concern the physical, thermodynamic, chemical, nutritional or sensory characteristics of foods, play an important role in food processing. In our quest to gain a mechanistic understanding of changes occurring during food processing, the knowledge of food properties is essential. Quantitative information on the food properties is necessary in the design and operation of food processing equipment. Foods, because of their biological nature and variability, vary in the magnitude of their properties. The variation in properties offer a challenge both in their measurement and use in the food processing applications. Often a high level of precision in measurement of properties is not possible as the measurement method may itself cause changes to the product, resulting in a variation in the obtained values. Recognizing the difficulties in measurement of food properties, and the lack of completeness of such information, several research programs have been in existence during the last two decades. In Europe, a multinational effort has been underway since 1978. The first project supported by COST (European Cooperation in the Field of Scientific and Technical Research), was titled COST 90 "The Effect of Processing on the Physical Properties of Foodstuffs". This and another project COST 90bis have considerably added to our knowledge of measurement methods and data on a number of physical properties. Two publications that summarize the work conducted under 1 2 these projects are Physical Properties of Foods and Physical Properties of Foods .
Download or read book Engineering Properties of Foods and Other Biological Materials written by Li Ma and published by . This book was released on 1998 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Food Processing Technology written by P.J. Fellows and published by Elsevier. This book was released on 2009-06-22 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Food processing technology was quickly adopted as the standard text by many food science and technology courses. This completely revised and updated third edition consolidates the position of this textbook as the best single-volume introduction to food manufacturing technologies available. This edition has been updated and extended to include the many developments that have taken place since the second edition was published. In particular, advances in microprocessor control of equipment, 'minimal' processing technologies, functional foods, developments in 'active' or 'intelligent' packaging, and storage and distribution logistics are described. Technologies that relate to cost savings, environmental improvement or enhanced product quality are highlighted. Additionally, sections in each chapter on the impact of processing on food-borne micro-organisms are included for the first time. - Introduces a range of processing techniques that are used in food manufacturing - Explains the key principles of each process, including the equipment used and the effects of processing on micro-organisms that contaminate foods - Describes post-processing operations, including packaging and distribution logistics
