Download or read book Engineering of Power Plant and Industrial Cooling Water Systems written by Charles F. Bowman and published by CRC Press. This book was released on 2021-08-23 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a reference to analysis techniques of common cooling water system problems and a historical perspective on solutions to chronic cooling water system problems, such as corrosion and biofouling. It covers best design practices for cooling water systems that are required to support the operation of all electric power plants. Plant engineers will gain better understanding of the practical issues associated with their cooling water systems and new designs or modifications of their systems should consider the actual challenges to the systems. The book is intended for graduate students and practicing engineers working in both nuclear and fossil power plants and industrial facilities that use large amounts of cooling water.
Download or read book Power Plant Engineering written by Charles Bowman and published by . This book was released on 2022-10-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: During my 50+ years as a practicing Professional Engineer I have presented technical papers at various conferences and in technical publications. Many of these venues have been long since forgotten and most of these papers are no longer retrievable. In my opinion, some of these papers are worthy of preservation, as they have contributed to the advancement of the engineering of balance-of-plant mechanical systems in electric power plants. To remedy this situation, I offer this book containing my older papers. More recently (since about 2012) I have had my papers published by the ASME which required me to surrender copyright, so I cannot include them in this book. However, Appendix A contains a list of those papers which should be available from the ASME in perpetuity.
Download or read book Nuclear Plant Thermodynamics for System and Design Engineers written by Charles F Bowman and published by . This book was released on 2023-01-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chuck Bowman Associates, Inc. has trained hundreds of practicing system and design engineers in the nuclear industry in heat exchanger analysis and thermodynamics. In the past the author has been asked to provide the training material contained in this book for on-site training by others. These requests have been denied for obvious reasons. However, after 50+ years as a practicing Professional Engineer the principal author has retired and now makes this material available at a reasonable cost. The course should be taught by a qualified, experienced mechanical engineer who would be familiar with this material. However, much of the information contained herein is captured in greater detail in the authors' books Thermal Engineering of Nuclear Power Stations - Balance of Plant Systems and Engineering of Power Plant and Industrial Cooling Water Systems, both published by the CRC Press. These books may be viewed as teacher's guide and companions to this material.
Download or read book Pittsburg Power Plant Cooling Water Studies written by Pacific Gas and Electric Company. Department of Engineering Research and published by . This book was released on 1970 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reviewing Environmental Impact Statements Power Plant Cooling Systems Engineering Aspects written by Alden G. Christianson and published by . This book was released on 1973 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Mechanical Engineering written by Kaushik Kumar and published by I K International Pvt Ltd. This book was released on 2017-01-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book starts with the law of forces, free-body diagrams, basic information on materials strength including stresses and strains. It further discusses principles of transmission of power and elementary designs of gears, spring, etc. This part concludes with mechanical vibrations, — their importance, types, isolation and critical speed. The second part, Thermal Engineering, deals with basics and laws of thermodynamics; pure substances and their properties. It further includes laws of heat transfer, insulation, and heat exchanges. This part concludes with a detailed discussion on refrigeration and air conditioning. Part three, Fluid Mechanics and Hydraulics, includes properties of fluids, measurement of pressure, Bernoull's equation, hydraulic turbine, pumps and various other hydraulic devices. Part four, Manufacturing Technology, mainly deals with various manufacturing processes such as metal forming, casting, cutting, joining, welding, surface finishing and powder metallurgy. It further deals with conventional and non-conventional machining techniques, fluid power control and automation including hydraulic and pneumatic systems and automation of mechanical systems. Part five, Automobile Engineering deals with various aspects of IC and SI engines and their classification, etc. Four- and two-stroke engines also find place in this section. Next, systems in automobiles including suspension and power transmission systems, starting, ignition, charging and fuel injection systems. The last section deals with power plant engineering and energy. It includes power plant layout, surface condensers, steam generators, boilers and gas turbine plants. It concludes with renewable, non- renewable, conventional and non-conventional sources of energy, and energy conversion devices.
Download or read book Combined Cooling Heating and Power written by Masood Ebrahimi and published by Elsevier. This book was released on 2014-10-08 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: A professional reference title written primarily for researchers in thermal engineering, Combined Cooling, Heating and Power: Decision-Making, Design and Optimization summarizes current research on decision-making and optimization in combined cooling, heating, and power (CCHP) systems. The authors provide examples of using these decision-making tools with five examples that run throughout the book. Offers a unique emphasis on newer techniques in decision-making Provides examples of decision-making tools with five examples that run throughout the book
Download or read book Operational and Environmental Consequences of Large Industrial Cooling Water Systems written by Sanjeevi Rajagopal and published by Springer Science & Business Media. This book was released on 2012-01-06 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of water for industrial purposes is of foremost importance. It is used as a coolant and industrial activities dealing with power generation, steel and iron, paper and pulp and oil require very large amounts of water. The industry, therefore, resorts to large scale abstraction of water from natural water bodies. This water is often treated with chemicals to combat operational problems like biofouling and corrosion. Such withdrawal and subsequent discharge of large amounts of water have the potential to impart significant impact on the recipient water body. The organisms drawn along with the cooling water, as well as those residing at the discharge zone, are subjected to a combination of mechanical, thermal and chemical stress on a continuous basis.
Download or read book Power Plant Engineering written by Black & Veatch and published by Boom Koninklijke Uitgevers. This book was released on 1996 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume provides a complete, authoritative, up-to-date reference for all aspects of power plant engineering. Coverage ranges from engineering economics to coal and limestone handling, from design processes to plant thermal heat balances. Both theory and practical applications are covered, giving engineers the information needed to plan, design, construct, upgrade, and operate power plants. Power Plant Engineering is the culmination of experience of hundreds of engineers from Black & Veatch, a leading firm in the field for more than 80 years. The authors review all major power generating technologies, giving particular emphasis to current approaches. Special features of the book include: * More than 1000 figures and lines drawings that illustrate all aspects of the subject. * Coverage of related components and systems in power plants such as turbine-generators, feedwater heaters, condenser, and cooling towers. * Definitions and analyses of the features of various plant systems. * Discussions of promising future technologies. Power Plant Engineering will be the standard reference in the professional engineer's library as the source of information on steam power plant generation. In addition, the clear presentation of the material will make this book suitable for use by students preparing to enter the field.
Download or read book Power Plant System Design written by Kam W. Li and published by John Wiley & Sons. This book was released on 1985 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the overall design of power plant systems, focusing on system rather than component design. Examines thermal aspects of systems and the desicions necessary to produce optimal power plant design. Includes appropriate computer methodology. Suitable for introductory courses in mechanical engineering.
Download or read book An Introduction to Thermal Power Plant Engineering and Operation written by P.K Das, A.K Das and published by Notion Press. This book was released on 2018-11-08 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to meet the requirements of the fresh engineers on the field to endow them with indispensable information, technical know-how to work in the power plant industries and its associated plants. The book provides a thorough understanding and the operating principles to solve the elementary and the difficult problems faced by the modern young engineers while working in the industries. This book is written on the basis of ‘hands-on’ experience, sound and in-depth knowledge gained by the authors during their experiences faced while working in this field. The problem generally occurs in the power plants during operation and maintenance. It has been explained in a lucid language.
Download or read book Engineering and Design written by United States. Army. Corps of Engineers and published by . This book was released on 1980 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plant Engineer s Handbook written by R. Keith Mobley and published by Elsevier. This book was released on 2001-05-14 with total page 1203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant engineers are responsible for a wide range of industrial activities, and may work in any industry. This means that breadth of knowledge required by such professionals is so wide that previous books addressing plant engineering have either been limited to only certain subjects or cursory in their treatment of topics. The Plant Engineering Handbook offers comprehensive coverage of an enormous range of subjects which are of vital interest to the plant engineer and anyone connected with industrial operations or maintenance. This handbook is packed with indispensable information, from defining just what a Plant Engineer actually does, through selection of a suitable site for a factory and provision of basic facilities (including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes) to issues such as lubrication, corrosion, energy conservation, maintenance and materials handling as well as environmental considerations, insurance matters and financial concerns. One of the major features of this volume is its comprehensive treatment of the maintenance management function; in addition to chapters which outline the operation of the various plant equipment there is specialist advice on how to get the most out of that equipment and its operators. This will enable the reader to reap the rewards of more efficient operations, more effective employee contributions and in turn more profitable performance from the plant and the business to which it contributes. The Editor, Keith Mobley and the team of expert contributors, have practiced at the highest levels in leading corporations across the USA, Europe and the rest of the world. Produced in association with Plant Engineering magazine, this book will be a source of information for plant engineers in any industry worldwide. * A Flagship reference work for the Plant Engineering series * Provides comprehensive coverage on an enormous range of subjects vital to plant and industrial engineer * Includes an international perspective including dual units and regulations
Download or read book Thermal Power Plant Cooling written by Carey Wayne King and published by American Society of Mechanical Engineers. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on engineering fundamentals of water use for cooling needs of thermoelectric, or steam cycle, power plants, along with environmental and economic contexts. Water has historically been abundant and cheap; however, the ever-growing human demands for fresh surface water and groundwater are potentially putting ecosystems at risk. Water demands for energy production and electric generation power plants are part of total water demand. This book contributes important information to aid a broader discussion of integrated water and energy management by providing background, references, and context for water and energy stakeholders specifically on the topic of water for cooling thermal power plants. This book serves as a reference and source of information to power plant owner/operators, water resource managers, energy and environmental regulators, and non-governmental organizations. From power plant owners wanting to know the tradeoffs in environmental impact and economics of cooling towers to water utilities that might want to deliver waste water for reuse for power plant cooling, this book provides a wide array of regulatory and technical discussion to meet the needs of a broad audience.
Download or read book Membranes for Industrial Wastewater Recovery and Re use written by S. Judd and published by Elsevier. This book was released on 2003-04-25 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is increasing political and environmental pressure on industry to clean up the water which it uses in many processes, and to re-use this water where possible. This cleaning is done using specially-developed industrial membranes and this book covers the types and design of membranes, how they work and in which industries they are used. Special attention is paid to the textile, food/ beverage, pharmaceutical, oil and pulp and paper industries where such membranes are in regular use.
Download or read book Environmental Engineering written by James R. Mihelcic and published by John Wiley & Sons. This book was released on 2014-01-13 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Engineering: Fundamentals, Sustainability, Design presents civil engineers with an introduction to chemistry and biology, through a mass and energy balance approach. ABET required topics of emerging importance, such as sustainable and global engineering are also covered. Problems, similar to those on the FE and PE exams, are integrated at the end of each chapter. Aligned with the National Academy of Engineering’s focus on managing carbon and nitrogen, the 2nd edition now includes a section on advanced technologies to more effectively reclaim nitrogen and phosphorous. Additionally, readers have immediate access to web modules, which address a specific topic, such as water and wastewater treatment. These modules include media rich content such as animations, audio, video and interactive problem solving, as well as links to explorations. Civil engineers will gain a global perspective, developing into innovative leaders in sustainable development.
Download or read book A Practical Approach to Water Conservation for Commercial and Industrial Facilities written by Mohan Seneviratne and published by Elsevier. This book was released on 2007-07-11 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industry and commerce use vast amounts of water and in some parts of the world water is becoming a scarce commodity. We need to take more care in our future use of water, and this book is a 'best practice' manual for industrial and commercial users world-wide. It offers a practical account of the measures which can be taken to re-educate industrial and commercial users in the techniques of water saving and re-use anywhere in the world. The principles are covered in detail and supported by examples from specific industries and commercial operations. Author Mohan Seneviratne is Manager of Sydney Water's 'Every Drop Counts Business Program', which won the prestigious 2006 Stockholm Industry Water Award in recognition of how the utility is working in partnership with business, industry and government to help ensure the long-term sustainability of Sydney’s water supply. * The first book to cover water conservation for industrial users from processing plants to pubs and clubs * Provides practical advice on implementing water conservation for users in various industry sectors * Written by a practicing water conservation consultant
