Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.

Download or read book Advanced Techniques for Materials Characterization written by A.K. Tyagi and published by Trans Tech Publications Ltd. This book was released on 2009-01-02 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). Nowadays, an impressively large number of powerful characterization techniques is being used by physicists, chemists, biologists and engineers in order to solve analytical research problems; especially those related to the investigation of the properties of new materials for advanced applications. Although there are a few available books which deal with such experimental techniques, they are either too exhaustive and cover very few techniques or are too elementary to provide a solid basis for learning to use the characterization technique. Moreover, such books usually over-emphasize the textbook approach: being full of theoretical concepts and mathematical derivations, and omitting the practical instruction required in order to permit newcomers to use the techniques.

Download or read book Engineering Materials Characterization written by Kaushik Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-11-20 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science today is the base for all technological and industrial developments. The book provides the understanding of the advanced spectroscopic and microscopic instruments used for material characterization. The main issues addressed are 1) a detailed understanding of the instrument, including working and handling, 2) sample preparation, and 3) data analysis and interpretation. The book is divided in two parts i.e., Part A discusses microscopic instruments, consisting of Optical Microscope, Scanning Electron Microscopy, Atomic Force Microscopy, Field Emission Scanning Electron Microscope and X-Ray Diffraction. Part B is on spectroscopic instruments and covers FTIR Spectrometer, Raman Spectrometer, X-ray Photoelectron Spectroscopy, Ultraviolet Photoelectron Spectroscopy, Fluorescence Spectroscopy, and Nuclear Magnetic Resonance Spectroscopy.

Download or read book Materials Characterization Techniques written by Sam Zhang and published by CRC Press. This book was released on 2008-12-22 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts must be able to analyze and distinguish all materials, or combinations of materials, in use today-whether they be metals, ceramics, polymers, semiconductors, or composites. To understand a material's structure, how that structure determines its properties, and how that material will subsequently work in technological applications, researche

Download or read book Handbook of Materials Characterization written by Surender Kumar Sharma and published by Springer. This book was released on 2018-09-18 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the widely used experimental techniques available for the structural, morphological, and spectroscopic characterization of materials. Recent developments in a wide range of experimental techniques and their application to the quantification of materials properties are an essential side of this book. Moreover, it provides concise but thorough coverage of the practical and theoretical aspects of the analytical techniques used to characterize a wide variety of functional nanomaterials. The book provides an overview of widely used characterization techniques for a broad audience: from beginners and graduate students, to advanced specialists in both academia and industry.

Download or read book Materials Characterization Using Nondestructive Evaluation NDE Methods written by Gerhard Huebschen and published by Woodhead Publishing. This book was released on 2016-03-23 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Characterization Using Nondestructive Evaluation (NDE) Methods discusses NDT methods and how they are highly desirable for both long-term monitoring and short-term assessment of materials, providing crucial early warning that the fatigue life of a material has elapsed, thus helping to prevent service failures. Materials Characterization Using Nondestructive Evaluation (NDE) Methods gives an overview of established and new NDT techniques for the characterization of materials, with a focus on materials used in the automotive, aerospace, power plants, and infrastructure construction industries. Each chapter focuses on a different NDT technique and indicates the potential of the method by selected examples of applications. Methods covered include scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques. The authors review both the determination of microstructure properties, including phase content and grain size, and the determination of mechanical properties, such as hardness, toughness, yield strength, texture, and residual stress. Gives an overview of established and new NDT techniques, including scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques Reviews the determination of microstructural and mechanical properties Focuses on materials used in the automotive, aerospace, power plants, and infrastructure construction industries Serves as a highly desirable resource for both long-term monitoring and short-term assessment of materials

Download or read book X ray Characterization of Materials written by Eric Lifshin and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linking of materials properties with microstructures is a fundamental theme in materials science, for which a detailed knowledge of the modern characterization techniques is essential. Since modern materials such as high-temperature alloys, engineering thermoplastics and multilayer semiconductor films have many elemental constituents distributed in more than one phase, characterization is essential to the systematic development of such new materials and understanding how they behave in practical applications. X-ray techniques play a major role in providing information on the elemental composition and crystal and grain structures of all types of materials. The challenge to the materials characterization expert is to understand how specific instruments and analytical techniques can provide detailed information about what makes each material unique. The challenge to the materials scientist, chemist, or engineer is to know what information is needed to fully characterize each material and how to use this information to explain its behavior, develop new and improved properties, reduce costs, or ensure compliance with regulatory requirements. This comprehensive handbook presents all the necessary background to understand the applications of X-ray analysis to materials characterization with particular attention to the modern approach to these methods.

Download or read book Materials Science and Engineering of Carbon written by Michio Inagaki and published by Butterworth-Heinemann. This book was released on 2016-06-07 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science and Engineering of Carbon: Characterization discusses 12 characterization techniques, focusing on their application to carbon materials, including X-ray diffraction, X-ray small-angle scattering, transmission electron microscopy, Raman spectroscopy, scanning electron microscopy, image analysis, X-ray photoelectron spectroscopy, magnetoresistance, electrochemical performance, pore structure analysis, thermal analyses, and quantification of functional groups. Each contributor in the book has worked on carbon materials for many years, and their background and experience will provide guidance on the development and research of carbon materials and their further applications. Focuses on characterization techniques for carbon materials Authored by experts who are considered specialists in their respective techniques Presents practical results on various carbon materials, including fault results, which will help readers understand the optimum conditions for the characterization of carbon materials

Download or read book Principles of Materials Characterization and Metrology written by Kannan M. Krishnan and published by Oxford University Press. This book was released on 2021-05-07 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization enables a microscopic understanding of the fundamental properties of materials (Science) to predict their macroscopic behaviour (Engineering). With this focus, Principles of Materials Characterization and Metrology presents a comprehensive discussion of the principles of materials characterization and metrology. Characterization techniques are introduced through elementary concepts of bonding, electronic structure of molecules and solids, and the arrangement of atoms in crystals. Then, the range of electrons, photons, ions, neutrons and scanning probes, used in characterization, including their generation and related beam-solid interactions that determine or limit their use, is presented. This is followed by ion-scattering methods, optics, optical diffraction, microscopy, and ellipsometry. Generalization of Fraunhofer diffraction to scattering by a three-dimensional arrangement of atoms in crystals leads to X-ray, electron, and neutron diffraction methods, both from surfaces and the bulk. Discussion of transmission and analytical electron microscopy, including recent developments, is followed by chapters on scanning electron microscopy and scanning probe microscopies. The book concludes with elaborate tables to provide a convenient and easily accessible way of summarizing the key points, features, and inter-relatedness of the different spectroscopy, diffraction, and imaging techniques presented throughout. Principles of Materials Characterization and Metrology uniquely combines a discussion of the physical principles and practical application of these characterization techniques to explain and illustrate the fundamental properties of a wide range of materials in a tool-based approach. Based on forty years of teaching and research, this book incorporates worked examples, to test the reader's knowledge with extensive questions and exercises.

Download or read book Microstructural Characterization of Materials written by David Brandon and published by John Wiley & Sons. This book was released on 2013-03-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructural characterization is usually achieved by allowing some form of probe to interact with a carefully prepared specimen. The most commonly used probes are visible light, X-ray radiation, a high-energy electron beam, or a sharp, flexible needle. These four types of probe form the basis for optical microscopy, X-ray diffraction, electron microscopy, and scanning probe microscopy. Microstructural Characterization of Materials, 2nd Edition is an introduction to the expertise involved in assessing the microstructure of engineering materials and to the experimental methods used for this purpose. Similar to the first edition, this 2nd edition explores the methodology of materials characterization under the three headings of crystal structure, microstructural morphology, and microanalysis. The principal methods of characterization, including diffraction analysis, optical microscopy, electron microscopy, and chemical microanalytical techniques are treated both qualitatively and quantitatively. An additional chapter has been added to the new edition to cover surface probe microscopy, and there are new sections on digital image recording and analysis, orientation imaging microscopy, focused ion-beam instruments, atom-probe microscopy, and 3-D image reconstruction. As well as being fully updated, this second edition also includes revised and expanded examples and exercises, with a solutions manual available at http://develop.wiley.co.uk/microstructural2e/ Microstructural Characterization of Materials, 2nd Edition will appeal to senior undergraduate and graduate students of material science, materials engineering, and materials chemistry, as well as to qualified engineers and more advanced researchers, who will find the book a useful and comprehensive general reference source.

Download or read book EM Material Characterization Techniques for Metamaterials written by Raveendranath U. Nair and published by Springer. This book was released on 2017-09-21 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a review of techniques based on waveguide systems, striplines, freespace systems and more, discussing the salient features of each method in detail. Since metamaterials are typically inhomogeneous and anisotropic, the experimental techniques for electromagnetic (EM) material characterization of metamaterial structures need to tackle several challenges. Furthermore, the modes supported by metamaterial structures are extremely sensitive to external perturbations. As such the measurement fixtures for EM material characterization have to be modified to account for such effects. The book provides a valuable resource for researchers working in the field of metamaterials

Download or read book A Guide to Materials Characterization and Chemical Analysis written by John P. Sibilia and published by John Wiley & Sons. This book was released on 1996-12-17 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written both for the novice and for the experienced scientist, this miniature encyclopedia concisely describes over one hundred materials methodologies, including evaluation, chemical analysis, and physical testing techniques. Each technique is presented in terms of its use, sample requirements, and the engineering principles behind its methodology. Real life industrial and academic applications are also described to give the reader an understanding of the significance and utilization of technique. There is also a discussion of the limitations of each technique.

Download or read book Optical Techniques for Solid State Materials Characterization written by Rohit P. Prasankumar and published by CRC Press. This book was released on 2020-06-30 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: With chapters written by pioneering experts in various optical techniques, this comprehensive reference provides detailed descriptions of basic and advanced optical techniques commonly used to study materials, from the simple to the complex. It explains how to use the techniques to acquire, analyze, and interpret data for gaining insight into ma

Download or read book Chemical Analysis and Material Characterization by Spectrophotometry written by Bhim Prasad Kaflé and published by Elsevier. This book was released on 2019-11-29 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Analysis and Material Characterization by Spectrophotometry integrates and presents the latest known information and examples from the most up-to-date literature on the use of this method for chemical analysis or materials characterization. Accessible to various levels of expertise, everyone from students, to practicing analytical and industrial chemists, the book covers both the fundamentals of spectrophotometry and instrumental procedures for quantitative analysis with spectrophotometric techniques. It contains a wealth of examples and focuses on the latest research, such as the investigation of optical properties of nanomaterials and thin solid films. Covers the basic analytical theory that is essential for understanding spectrophotometry Emphasizes minor/trace chemical component analysis Includes the spectrophotometric analysis of nanomaterials and thin solid films Thoroughly describes methods and uses easy-to-follow, practical examples and experiments

Download or read book Materials Characterization written by Naryanaswami (Mohan) Ranganathan and published by CRC Press. This book was released on 2016-01-05 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, which is a result of a coordinated effort by 22 researchers from five different countries, addresses the methods of determining the local and global mechanical properties of a variety of materials: metals, plastics, rubber, and ceramics. The first chapter treats nanoindentation techniques comprehensively. Chapter 2 concerns polymer surfa

Download or read book Computational Methods and Experiments in Materials Characterization III written by C. A. Brebbia and published by WIT Press. This book was released on 2007 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, engineering materials could be characterized successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many: optimization, investigation of failure, simulation of production processes, to name but a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book publishes papers presented at the Third International Conference on Computational Methods and Experiments in Material Characterisation.Topics covered include: Composites; Ceramics; Alloys; Cements and Cement Based Materials; Biomaterials; Thin Films and Coatings; Advanced Materials; Imaging Analysis; Thermal Analysis; New Methods; Surface Chemistry, Nano Indentation; Continuum Methods; Particle Models; Damage Mechanics; Innovative Techniques; Stochastic Methods.

Download or read book Materials Characterization written by Ramiro Pérez Campos and published by Springer. This book was released on 2015-04-27 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers novel research results for process and techniques of materials characterization for a wide range of materials. The authors provide a comprehensive overview of the aspects of structural and chemical characterization of these materials. The articles contained in this book covers state of the art and experimental techniques commonly used in modern materials characterization. The book includes theoretical models and numerous illustrations of structural and chemical characterization properties.