Download or read book Engineering Coatings written by S Grainger and published by Elsevier. This book was released on 1998-08-24 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is now 10 years since the first edition of Engineering Coatings by Stan Grainger appeared. The success of that edition, and the developments in the area since its publication make this new edition a valuable addition to the literature on the subject. This new edition describes the many methods by which surface coatings or surface modification can be carried out to delay surface degradation and prolong the useful life of engineering components. Since surface technology has advanced in many areas, new techniques such as the newer thermal spray processes and laser surfacing are now covered and the book has been expanded to include more coverage on corrosion. Major changes have also taken place in health and safety legislation, and the sections covering health and safety have been entirely revised as a result. Engineering Coatings with its breadth of coverage and sound basis in industrial practice is an invaluable guide to methods which have the potential to save money in many industries concerned with wear, corrosion, welding and thermal spraying of engineering components.
Download or read book The Science and Engineering of Thermal Spray Coatings written by Lech Pawlowski and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively updated and revised version builds on the success of the first edition featuring new discoveries in powder technology, spraying techniques, new coatings applications and testing techniques for coatings -- Many new spray techniques are considered that did not exist when the first edition was published! The book begins with coverage of materials used, pre-spray treatment, and the techniques used. It then leads into the physics and chemistry of spraying and discusses coatings build-up. Characterization methods and the properties of the applied coatings are presented, and the book concludes with a lengthy chapters on thermal spray applications covers such areas as the aeronautics and space, automobiles, ceramics, chemicals, civil engineering, decorative coatings, electronics, energy generation and transport, iron and steel, medicine, mining and the nuclear industries.
Download or read book Advances In Smart Coatings And Thin Films For Future Industrial and Biomedical Engineering Applications written by Abdel Salam Hamdy Makhlouf and published by Elsevier. This book was released on 2019-10-25 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances In Smart Coatings And Thin Films For Future Industrial and Biomedical Engineering Applications discusses in detail, the recent trends in designing, fabricating and manufacturing of smart coatings and thin films for future high-tech. industrial applications related to transportation, aerospace and biomedical engineering. Chapters cover fundamental aspects and diverse approaches used to fabricate smart self-healing anti-corrosion coatings, shape-memory coatings, polymeric and nano-bio-ceramic cotings, bio-inspired and stimuli-responsive coatings for smart surfaces with antibacterial activkity and controlled wettability, and electrically conductive coatings and their emerging applications. With the emphasis on advanced methodologies and recent emerging applications of smart multifunctional coatings and thin films, this book is essential reading for materials scientists and rsearchers working in chemical sciences, advanced materials, sensors, pharmaceutical and biomedical engineering. Discusses the most recent advances and innovations in smart multifunctional coatings and thin films in the transportation, aerospace and biomedical engineering industries Highlights the synthesis methods, processing, testing and characterization of smart coatings and thin films Reviews the current prospects and future trends within the industry
Download or read book Engineering Coatings written by S Grainger and published by Woodhead Publishing. This book was released on 1998-08-24 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This latest edition of Stan Grainger's original 1989 handbook reflects the many advances in surfacing technology since that time. Additional thermal spray processes and laser surfacing are included and more information on corrosion has been included. The major changes that have taken place in health and safety legislation have led to significant revisions in the relevant chapters.
Download or read book Coatings Tribology written by K. Holmberg and published by Elsevier. This book was released on 1994-07-15 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a general view on thin surface coatings used for tribological applications and it is based on the current state of understanding. The mechanisms of friction and wear in sliding and rolling contacts of coated surfaces are described. Basic information on coating techniques, tribology and surface mechanisms is given. Based on collected experimental works information is given on the properties of thin soft coatings, such as polymer, lamellar solid and soft metal coatings; thin hard coatings, such as nitride, carbide, oxide, boride and diamond and diamond-like coatings; and multi-component and multi-layer coatings. The influence of interface layers and lubricants is highlighted. The methods available for characterization of coated surfaces and for mechanical and chemical evaluation of their tribological properties are described. Tribological evaluation methods for accelerated and field testing and the need for standardization of quality assurance procedures are discussed. A methodology for the selection of thin coatings for tribological applications is presented and knowledge based expert system approaches for coating selection are reviewed. For different application examples, the basic tribological contact mechanisms are described and the possibilities for improving their tribological properties by using surface coatings are discussed. The application examples include sliding and rolling bearings, gears, tools for cutting and forming, erosion resistant applications, magnetic recording systems and bio-medical implants.
Download or read book Paint and Coatings written by P.E., Philip A. Schweitzer and published by CRC Press. This book was released on 2005-09-23 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Paint and Coatings: Applications and Corrosion Resistance helps designers, engineers, and maintenance personnel choose the appropriate coatings to best protect equipment, structures, and various components from corrosion, degradation, and failure. The book addresses all factors - including physical and mechanical properties, workability, co
Download or read book Advanced Surface Coating Techniques for Modern Industrial Applications written by Roy, Supriyo and published by IGI Global. This book was released on 2020-09-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In engineering, there are often situations in which the material of the main component is unable to sustain long life or protect itself from adverse operating environments. Moreover, in some cases, different material properties such as anti-friction and wear, anti-corrosive, thermal resistive, super hydrophobic, etc. are required as per the operating conditions. If those bulk components are made of such materials and possess those properties, the cost will be very high. In such cases, a practical solution is surface coating, which serves as a protective barrier to the bulk material from the adverse environment. In the last decade, with enormous effort, researchers and scientists have developed suitable materials to overcome those unfavorable operating conditions, and they have used advanced deposition techniques to enhance the adhesion and surface texturing of the coatings. Advanced Surface Coating Techniques for Modern Industrial Applications is a highly sought reference source that compiles the recent research trends in these new and emerging surface coating materials, deposition techniques, properties of coated materials, and their applications in various engineering and industrial fields. The book particularly focuses on 1) coating materials including anti-corrosive materials and nanomaterials, 2) coating methods including thermal spray and electroless disposition, and 3) applications such as surface engineering and thin film application. The book is ideal for engineers, scientists, researchers, academicians, and students working in fields like material science, mechanical engineering, tribology, chemical and corrosion science, bio-medical engineering, biomaterials, and aerospace engineering.
Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book Advances in Marine Antifouling Coatings and Technologies written by Claire Hellio and published by Elsevier. This book was released on 2009-05-22 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine biofouling can be defined as the undesirable accumulation of microorganisms, algae and animals on structures submerged in seawater. From the dawn of navigation, marine biofouling has been a major problem for shipping in such areas as reduced speed, higher fuel consumption and increased corrosion. It also affects industries using off-shore structures such as oil and gas production and aquaculture. Growing concerns about the environmental impact of antifouling coatings has led to major new research to develop more environmentally-friendly alternatives. Advances in marine antifouling coatings and technologies summaries this wealth of research and its practical implications. This book is divided into four sub-sections which discuss: marine fouling organisms and their impact, testing and development of antifouling coatings, developments in chemically-active marine antifouling technologies, and new surface approaches to the control of marine biofouling. It provides an authoritative overview of the recent advances in understanding the biology of fouling organisms, the latest developments on antifouling screening techniques both in the field and in the laboratory, research on safer active compounds and the progress on nontoxic coatings with tailor-made surface properties. With its distinguished editors and international team of contributors, Advances in marine antifouling coatings and technologies is a standard reference for manufacturers of marine antifouling solutions, the shipping industry, oil and gas producers, aquaculture and other industries using offshore structures, and academics researching this important area. Assesses marine antifouling organisms and their impact, including a historical review and directions for future research Discusses developments in antifouling coatings examining chemically-active and new surface approaches Reviews the environmentally friendly alternative of safer active compounds and the progress of non-toxic compounds
Download or read book Paint and Surface Coatings written by Ronald Lambourne and published by Ellis Horwood Limited. This book was released on 1993-01-01 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Surface Coatings a Handbook of Surface Engineering written by A. Matthews and published by Springer. This book was released on 2012-11-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past decade has seen a rapid development in the range of techniques which are available to modify the surfaces of engineering components. This in tum has led to the emergence of the new field of surface engineering the design of a composite system (coating plus substrate) that produces a performance which cannot be achieved by either the coating or substrate alone. With this expansion comes the problem of deciding on the correct surfacing technology for a given application. Clearly, to take full advantage of the benefits which surface engineering offers, there is a need to explain, in a structured way, the basic features and interrelationships of the most recently developed coatings and treatments. Advanced Surface Coatings satisfies this need by providing a concise and authoritative state-of-the art review of surface engineering. In chapter 1 the reader is provided with an insight into the surfacing technology appropriate for a given function. Chapter 2 reviews the principles of plasma generation (a theme which is central to many of the advanced surface treatments and coatings) and forms a solid foundation for the chap ters which follow. Chapters 3 to 10 each discuss the general principles on which the technology is based, followed by an appreciation of specific properties and application areas for materials treated by each particular method. These chapters cover ion implantation, ion-assisted coatings, evaporation, sputtering, physical vapour deposition, chemical vapour deposi tion, thermal spraying, and laser treatments.
Download or read book Thermal Barrier Coatings written by Hongbo Guo and published by Woodhead Publishing. This book was released on 2023-01-18 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Barrier Coatings, Second Edition plays a critical role in counteracting the effects of corrosion and degradation of exposed materials in high-temperature environments such as gas turbine and aero-engines. This updated edition reviews recent advances in the processing and performance of thermal barrier coatings, as well as their failure mechanisms. Novel technologies for the manufacturing of thermal barrier coatings (TBCs) such as plasma spray-physical vapor deposition and suspension plasma spray, are covered, as well as severe degradation of TBCs caused by CMAS attack. In addition to discussions of new materials and technologies, an outlook about next generation TBCs, including T/EBCs is discussed.This edition will provide the fundamental science and engineering of thermal barrier coatings for researchers in the field of TBCs, as well as students looking for a tutorial. Includes coverage of emerging materials, such as rare-earth doped ceramics Presents the latest on plasma spray-physical vapor deposition and suspension (solution precursor) Discusses the degradation of TBCs caused by CMAS attack and its protection Looks at thermally environmental barrier coatings, interdiffusion and diffusion barrier
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book Organic Coatings written by Zeno W. Wicks, Jr. and published by John Wiley & Sons. This book was released on 2007-03-15 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Third Edition brings acclaimed textthoroughly up to date with the latestorganic coatings technology Organic Coatings, Third Edition is an unparalleled reference and text for organic coatings technology and its myriad applications. It begins with discussions of key principles of coatings, then thoroughly explores raw materials, physical concepts, formulations, and applications. Scientists, engineers, and paint formulators all gain a deeper understanding of the principles underlying the technology and learn how to use these principles in the development, production, and application of organic coatings. The four authors, all leading industry experts, offer a unique approach to the topic that correlates the empirical technology of coatings with the underlying science. This Third Edition has been completely revised and updated to reflect numerous changes in the field, including changes driven by increasing pressure to lower VOC emissions, reduce energy requirements, and eliminate potential health hazards from organic coatings components. In addition, the authors have developed new material to make the text more accessible for scientists and engineers first entering the field, as well as for students taking coatings courses. At the same time, the hallmarks that distinguished the two previous editions have been retained, including: Troubleshooting guidance for coatings scientists and technologists Clear differentiation between established principles and hypotheses requiring further research Precise definitions of coatings industry terminology Extensive references to the current literature Hundreds of figures that help readers visualize key concepts and techniques Whether you are just entering the field of organic coatings and need a broad overview or you are an experienced professional who needs a sophisticated reference, you can depend on Organic Coatings to give you the information and answers you need.
Download or read book Corrosion of Linings Coatings written by Philip A. Schweitzer, P.E. and published by CRC Press. This book was released on 2006-12-21 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instead of using expensive alloys to construct a tank or processing vessel, it is often more economical to use a less expensive metal, such as carbon steel, and install a lining to provide protection from corrosion. Corrosion of Linings and Coatings: Cathodic and Inhibitor Protection and Corrosion Monitoring offers focused coverage for professionals interested in protective linings and coatings, corrosion protection, and monitoring techniques. The author details various materials and methods for controlling and protecting against corrosion. He discusses the use of mortars, grouts, and monolithic surfaces and explains how the use of inhibitors and cathodic protection help prevent corrosion. The book also provides details for various types of linings materials and coatings and includes valuable compatibility charts for each material covered. The author concludes with an explanation of a variety of corrosion monitoring techniques currently available.
Download or read book Protective Thin Coatings Technology written by Sam Zhang and published by CRC Press. This book was released on 2021-08-08 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard or protective coatings are widely used in conventional and modern industries and will continue to play a key role in future manufacturing, especially in the micro and nano areas. Protective Thin Coatings Technology highlights the developments and advances in the preparation, characterization, and applications of protective micro-/nanoscaled films and coatings. This book Covers technologies for sputtering of flexible hard nanocoatings, deposition of solid lubricating films, and multilayer transition metal nitrides Describes integrated nanomechanical characterization of hard coatings, corrosion and tribo-corrosion of hard coatings, and high entropy alloy films and coatings Investigates thin films and coatings for high-temperature applications, nanocomposite coatings on magnesium alloys, and the correlation between coating properties and industrial applications Features various aspects of hard coatings, covering advanced sputtering technologies, structural characterizations, and simulations, as well as applications This first volume in the two-volume set, Protective Thin Coatings and Functional Thin Films Technology, will benefit industry professionals and researchers working in areas related to semiconductors, optoelectronics, plasma technology, solid-state energy storages, and 5G, as well as advanced students studying electrical, mechanical, chemical, and material engineering.
Download or read book Ceramic Coatings written by Feng Shi and published by BoD – Books on Demand. This book was released on 2012-02-24 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main target of this book is to state the latest advancement in ceramic coatings technology in various industrial fields. The book includes topics related to the applications of ceramic coating covers in enginnering, including fabrication route (electrophoretic deposition and physical deposition) and applications in turbine parts, internal combustion engine, pigment, foundry, etc.
