Download or read book Engineered Transparency 2021 written by Bernhard Weller and published by John Wiley & Sons. This book was released on 2021-07-06 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains more than 70 articles and presents international trends in structural glazing and facade construction. Renowned authors from all over the world report on current research results and innovative construction projects.
Download or read book Engineered Transparency 2018 written by Bernhard Weller and published by VCH. This book was released on 2018-10-17 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composites for Environmental Engineering written by Shakeel Ahmed and published by John Wiley & Sons. This book was released on 2019-10-08 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites are materials made from two or more constituent materials with significantly different physical or chemical properties. The two materials combine together to give a new material with higher strength, toughness, stiffness, but also a higher resistance to creep, corrosion, wear or fatigue compared to conventional materials. It is composed primarily of a matrix i.e. a continuous phase which is armoured with secondary discontinues reinforcement phase. These materials have been used in a variety of products viz. spacecrafts, sporting goods, catalyst, sensors, actuators, biomedical materials, batteries, cars, furniture, aircraft components, etc. This book focusses on processing, properties of various types of composite materials, as well as their environmental engineering applications. This book examines the current state of art, new challenges, and opportunities of composites in environmental engineering. The chapters in this book covers nearly every topic related to composites in environmental engineering in four broad perspectives: (i) classification of composites (ii) green/hybrid synthesis and characterization of nano and biocomposites (iii) processing of composite materials (iv) state-of–the-art in fabricating the composites - nano and biocomposites - for environmental applications.
Download or read book International Handbook of Engineering Education Research written by Aditya Johri and published by Taylor & Francis. This book was released on 2023-05-23 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook offers a broad overview of contemporary research on engineering education and its practical application. Over the past two decades, the field of engineering education research (EER) has become a vibrant and impactful community with new journals, conferences, and doctoral and research programs established across the globe. The increased interest in this area has helped improve the education and training of the next generation of engineers, as well as supporting growth in the use of technology for teaching and learning, increased attention to broadening participation, diversity and inclusion in the field, and a wide international expansion of the field. Drawing on the work of 100 expert contributors from over 20 countries, this volume covers both emergent and established areas of research within engineering education, giving voice to newcomers to the field as well as perspectives from established experts. Contents include: Sociocognitive and affective perspectives on engineering education. Technology and online learning in engineering education. Cultural and ethical issues including diversity, equity, and inclusion in engineering education. Curriculum design, teaching practices, and teacher education at all levels. Research methods and assessment in engineering education. This book offers an innovative and in-depth overview of engineering education scholarship and practice, which will be of use to researchers in engineering education, engineering educators and faculty, teacher educators in engineering education or STEM education, and other engineering and STEM-related professional organizations. The Open Access version of this book, available at http://www.taylorfrancis.com, has been made available under a Creative Commons Attribution-Non Commercial-No Derivatives (CC-BY-NC-ND) 4.0 license.
Download or read book Sustainable Industrial Engineering along Product Service Life Cycle Supply Chain written by João Carlos de Oliveira Matias and published by MDPI. This book was released on 2021-08-25 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable industrial engineering addresses the sustainability issue from economic, environmental, and social points of view. Its application fields are the whole value chain and lifecycle of products/services, from the development to the end-of-life stages. This book aims to address many of the challenges faced by industrial organizations and supply chains to become more sustainable through reinventing their processes and practices, by continuously incorporating sustainability guidelines and practices in their decisions, such as circular economy, collaboration with suppliers and customers, using information technologies and systems, tracking their products’ life-cycle, using optimization methods to reduce resource use, and to apply new management paradigms to help mitigate many of the wastes that exist across organizations and supply chains. This book will be of interest to the fast-growing body of academics studying and researching sustainability, as well as to industry managers involved in sustainability management.
Download or read book Polymer Matrix Wave Transparent Composites written by Junwei Gu and published by John Wiley & Sons. This book was released on 2024-04-22 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Matrix Wave-Transparent Composites One-stop reference on important recent research accomplishments in the field of polymer matrix wave-transparent composites Polymer Matrix Wave-Transparent Composites: Materials, Properties, and Applications is a unique book that focuses on polymer matrix wave-transparent composites for electromagnetic wave transmission of a certain frequency, discussing various aspects of design, fabrication, structure, properties, measurement methods, and mechanisms, along with practical applications of functional polymer composites in industrial fields ranging from aircraft radomes, to radomes for ground, shipborne, and airborne purposes, to radomes for 5G communication, to printed circuit boards and beyond. Edited by four highly qualified academics and contributed to by well-known experts in the field, Polymer Matrix Wave-Transparent Composites includes detailed discussion on sample topics such as: Interface between the reinforced fiber and polymer matrix, including basic concepts, characterization, and the most common method of functionalization for the interface Mechanism of wave-transparent, factors that influence wave-transparent performance, and fabrication techniques Processes of hand paste molding, pressure bag molding, laminated molding, resin transfer molding (RTM), and winding molding Physical and chemical properties of the inorganic fibers (glass fibers and quartz fibers) and organic fibers (aramid fibers, ultra-high molecular weight polyethylene fibers and poly-p-phenylene benzobisoxazole fibers) Polymer Matrix Wave-Transparent Composites is an essential reference on the latest research in the field for researchers and related professionals, as well as for individuals who are not familiar with the field and wish to gain a holistic understanding in one place.
Download or read book Engineering Applications in Livestock Production written by Ayon Tarafdar and published by Elsevier. This book was released on 2024-01-20 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Applications in Livestock Production covers the recent advancements and technological developments in the field of livestock production engineering in great detail. The major advances covered in this book include the use of artificial intelligence, image processing, Internet of Things, novel animal product processing technologies, farm automation systems, sensor technology, bioengineering practices and even engineered housing systems among others. The book includes applications of emerging sensor based and intelligent techniques/systems in the field of livestock production and management The book will have separate chapters dedicated to innovative approaches in the livestock sector such as artificial intelligence, micro and nano sensors, IoT, image processing and farm automation Specialists contribution of chapters provide comprehensive details while assisting the understanding of the concepts
Download or read book Market Engineering written by Henner Gimpel and published by Springer Nature. This book was released on 2021-04-26 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides a broad range of insights on market engineering and information management. It covers topics like auctions, stock markets, electricity markets, the sharing economy, information and emotions in markets, smart decision-making in cities and other systems, and methodological approaches to conceptual modeling and taxonomy development. Overall, this book is a source of inspiration for everybody working on the vision of advancing the science of engineering markets and managing information for contributing to a bright, sustainable, digital world. Markets are powerful and extremely efficient mechanisms for coordinating individuals’ and organizations’ behavior in a complex, networked economy. Thus, designing, monitoring, and regulating markets is an essential task of today’s society. This task does not only derive from a purely economic point of view. Leveraging market forces can also help to tackle pressing social and environmental challenges. Moreover, markets process, generate, and reveal information. This information is a production factor and a valuable economic asset. In an increasingly digital world, it is more essential than ever to understand the life cycle of information from its creation and distribution to its use. Both markets and the flow of information should not arbitrarily emerge and develop based on individual, profit-driven actors. Instead, they should be engineered to serve best the whole society’s goals. This motivation drives the research fields of market engineering and information management. With this book, the editors and authors honor Professor Dr. Christof Weinhardt for his enormous and ongoing contribution to market engineering and information management research and practice. It was presented to him on the occasion of his sixtieth birthday in April 2021. Thank you very much, Christof, for so many years of cooperation, support, inspiration, and friendship.
Download or read book Engineered Nanostructures for Therapeutics and Biomedical Applications written by Ajeet Kumar Kaushik and published by Woodhead Publishing. This book was released on 2022-08-31 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineered Nanostructures for Therapeutics and Biomedical Applications offers a single reference for a diverse biomedical readership to learn about the application of nanotechnology in biomedicine and biomedical engineering, from past developments to current research and future prospects. This book sets out a broad selection of biomedical and therapeutic applications for nanostructures, including bioimaging, nanorobotics, orthopedics, and tissue engineering, offering a useful, multidisciplinary approach. Each chapter discusses challenges faced in each discipline, including limiting factors, biocompatibility, and toxicity, thus enabling the reader to make informed decisions in their research.This book is a comprehensive, broad overview of the role and significance of nanomaterials and their composites that also includes discussions of key aspects in the field of biomedicine. It will be of significant interest to academics and researchers in materials science and engineering, biomedicine and biomedical engineering, chemical engineering, pharmaceutics, bioimaging, and nanorobotics. Provides a broad overview of the many applications of nanomaterials and nanotechnology in biomedicine and engineering Offers a multidisciplinary approach that will appeal to a diverse readership, including those in biomedical engineering, materials science, biomedicine, and pharmaceutics Includes challenges faced and limiting factors for each application, allowing readers to make an informed decision when using nanomaterials in their research
Download or read book Food Safety Engineering written by Ali Demirci and published by Springer Nature. This book was released on 2020-05-28 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Safety Engineering is the first reference work to provide up-to-date coverage of the advanced technologies and strategies for the engineering of safe foods. Researchers, laboratory staff and food industry professionals with an interest in food engineering safety will find a singular source containing all of the needed information required to understand this rapidly advancing topic. The text lays a solid foundation for solving microbial food safety problems, developing advanced thermal and non-thermal technologies, designing food safety preventive control processes and sustainable operation of the food safety preventive control processes. The first section of chapters presents a comprehensive overview of food microbiology from foodborne pathogens to detection methods. The next section focuses on preventative practices, detailing all of the major manufacturing processes assuring the safety of foods including Good Manufacturing Practices (GMP), Hazard Analysis and Critical Control Points (HACCP), Hazard Analysis and Risk-Based Preventive Controls (HARPC), food traceability, and recalls. Further sections provide insights into plant layout and equipment design, and maintenance. Modeling and process design are covered in depth. Conventional and novel preventive controls for food safety include the current and emerging food processing technologies. Further sections focus on such important aspects as aseptic packaging and post-packaging technologies. With its comprehensive scope of up-to-date technologies and manufacturing processes, this is a useful and first-of-its kind text for the next generation food safety engineering professionals.
Download or read book The Human Side of Service Engineering written by Christine Leitner, Jens Neuhüttler, Clara Bassano and Debra Satterfield and published by AHFE International. This book was released on 2023-07-19 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 14th International Conference on Applied Human Factors and Ergonomics (AHFE 2023), July 20–24, 2023, San Francisco, USA
Download or read book Computer Science Engineering and Emerging Technologies written by Rajeev Sobti and published by CRC Press. This book was released on 2024-06-07 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: The year 2022 marks the 100th birth anniversary of Kathleen Hylda Valerie Booth, who wrote the first assembly language and designed the assembler and auto code for the first computer systems at Birkbeck College, University of London. She helped design three different machines including the ARC (Automatic Relay Calculator), SEC (Simple Electronic Computer), and APE(X). School of Computer Science and Engineering, under the aegis of Lovely Professional University, pays homage to this great programmer of all times by hosting “BOOTH100”—6th International Conference on Computing Sciences.
Download or read book Engineering Data Driven Adaptive Trust based e Assessment Systems written by David Baneres and published by Springer Nature. This book was released on 2019-10-18 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shares original innovations, research, and lessons learned regarding teaching and technological perspectives on trust-based learning systems. Both perspectives are crucial to enhancing the e-Assessment process. In the course of the book, diverse areas of the computer sciences (machine learning, biometric recognition, cloud computing, and learning analytics, amongst others) are addressed. In addition, current trends, privacy, ethical issues, technological solutions, and adaptive educational models are described to provide readers with a global view on the state of the art, the latest challenges, and potential solutions in e-Assessment. As such, the book offers a valuable reference guide for industry, educational institutions, researchers, developers, and practitioners seeking to promote e-Assessment processes.
Download or read book Advancement in Materials Manufacturing and Energy Engineering Vol II written by Puneet Verma and published by Springer Nature. This book was released on 2022-01-18 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. II) presents select proceedings of the conference on “Advancement in Materials, Manufacturing, and Energy Engineering (ICAMME 2021).” It discusses the latest materials, manufacturing processes, evaluation of materials properties for the application in automotive, aerospace, marine, locomotive, and energy sectors. The topics covered include advanced metal forming, bending, welding and casting techniques, recycling and re-manufacturing of materials and components, materials processing, characterization and applications, materials, composites and polymer manufacturing, powder metallurgy and ceramic forming, numerical modeling and simulation, advanced machining processes, functionally graded materials, non-destructive examination, optimization techniques, engineering materials, heat treatment, material testing, MEMS integration, energy materials, bio-materials, metamaterials, metallography, nanomaterial, SMART materials, bioenergy, fuel cell, and superalloys. The book will be useful for students, researchers, and professionals interested in interdisciplinary topics in the areas of materials, manufacturing, and energy sectors.
Download or read book IFMIS Re engineering Strategic Plan 2013 2018 written by and published by . This book was released on 2013 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Food Engineering Innovations Across the Food Supply Chain written by Pablo Juliano and published by Academic Press. This book was released on 2021-12-05 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Engineering Innovations Across the Food Supply Chain discusses the technology advances and innovations into industrial applications to improve supply chain sustainability and food security. The book captures the highlights of the 13th International Congress of Engineering ICEF13 under selected congress themes, including Sustainable Food Systems, Food Security, Advances in Food Process Engineering, Novel Food Processing Technologies, Food Process Systems Engineering and Modeling, among others. Edited by a team of distinguished researchers affiliated to CSIRO, this book is a valuable resource to all involved with the Food Industry and Academia. Feeding the world’s population with safe, nutritious and affordable foods across the globe using finite resources is a challenge. The population of the world is increasing. There are two opposed sub-populations: those who are more affluent and want to decrease their caloric intake, and those who are malnourished and require more caloric and nutritional intake. For sustainable growth, an increasingly integrated systems approach across the whole supply chain is required. Focuses on innovation across the food supply chain beyond the traditional food engineering discipline Brings the integration of on-farm with food factory operations, the inclusion of Industry 4.0 sensing technologies and Internet of Things (IoT) across the food chain to reduce food wastage, water and energy inputs Makes a full intersection into other science domains (operations research, informatics, agriculture and agronomy, machine learning, artificial intelligence and robotics, intelligent packaging, among others)
Download or read book Advances in Materials and Manufacturing Engineering written by T. Rajmohan and published by Springer Nature. This book was released on 2020-09-21 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected papers from the Fourth International Conference on Materials and Manufacturing Engineering (ICMME 2019). The contents focus on the latest developments in the synthesis and characterization of new materials, and highlights the challenges involved in the manufacturing and machinability of different materials. Advanced and cost-effective manufacturing processes and their applications are also discussed in the book. In addition, it covers topics like robotics, fluid dynamics, design and development, and different optimization techniques. The contents of this book will be beneficial to students, researchers, and industry professionals.
