Download or read book Engineer s Guide to High temperature Superconductivity written by James D. Doss and published by Wiley-Interscience. This book was released on 1989 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical guide to superconductors, including the new generation of high-temperature superconductors, and a variety of applications. It provides a short history of superconductivity, before going on to discuss superconducting phenomena, including type I and type II superconductors, and high-temperature superconductivity, including bismuth- and thallium-based superconductors and the YBaCuo ceramic and its rare-earth counterparts. The author also addresses engineering applications, cryogenic temperature measurement, and safety. Extensive references and appendices are also included.
Download or read book High Temperature Superconductivity 1 written by A. V. Narlikar and published by Springer Science & Business Media. This book was released on 2004 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Download or read book Introduction to High Temperature Superconductivity written by Thomas Sheahen and published by Springer Science & Business Media. This book was released on 2006-02-24 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing from physics, mechanical engineering, electrical engineering, ceramics, and metallurgy, high-temperature superconductivity (HTSC) spans nearly the entire realm of materials science. This volume presents each of those disciplines at an introductory level, such that readers will ultimately be able to read the literature in the field.
Download or read book High Temperature Superconductivity 2 written by Anant V. Narlikar and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Download or read book High Temperature Superconducting Materials Science and Engineering written by Donglu Shi and published by Elsevier. This book was released on 1995-02-20 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the fascinating field of high-temperature superconductivity. Basic concepts–including experimental techniques and theoretical issues–are discussed in a clear, systematic manner. In addition, the most recent research results in the measurements, materials synthesis and processing, and characterization of physical properties of high-temperature superconductors are presented. Researchers and students alike can use this book as a comprehensive introduction not only to superconductivity but also to materials-related research in electromagnetic ceramics. Special features of the book: presents recent developments in vortex-state properties, defects characterization, and phase equilibrium introduces basic concepts for experimental techniques at low temperatures and high magnetic fields provides a valuable reference for materials-related research discusses potential industrial applications of high-temperature superconductivity includes novel processing technologies for thin film and bulk materials suggests areas of research and specific problems whose solution can make high-Tc superconductors a practical reality
Download or read book Physics for Scientists and Engineers Study Guide written by Paul A. Tipler and published by Macmillan. This book was released on 2008-01-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study guide provides students with key physical quantities and equations, misconceptions to avoid, questions and practice problems to gain further understanding of physics concepts, and quizzes to test student knowledge of chapters. All written with the same level of detail as the examples found in the text.
Download or read book High Temperature Superconductivity written by D.P Tunstall and published by CRC Press. This book was released on 2021-07-29 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Superconductivity provides a broad survey of high temperature superconductivity, discussing the adaptations of experimental and theoretical techniques and methods that take advantage of the revolutionary properties of high temperature superconductors. Distinguished engineers, chemists, and experimental and theoretical physicists introduce their own particular area of the field before going on to explain current theories and techniques. The book is divided into three sections: materials, mechanisms, and devices. Topics covered include synthetic approaches to the growth of new materials; optical, magnetic, and electrical characterization of synthesized materials; strong correlations; the magnon pairing mechanism; and technical background of device performance in new materials. A coherent introduction to high temperature superconductivity, this volume will be invaluable to researchers in condensed matter physics, chemistry, materials science, and engineering.
Download or read book Handbook of High Temperature Superconductivity written by J. Robert Schrieffer and published by Springer Science & Business Media. This book was released on 2007-03-20 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1980s, a general theme in the study of high-temperature superconductors has been to test the BCS theory and its predictions against new data. At the same time, this process has engendered new physics, new materials, and new theoretical frameworks. Remarkable advances have occurred in sample quality and in single crystals, in hole and electron doping in the development of sister compounds with lower transition temperatures, and in instruments to probe structure and dynamics. Handbook of High-Temperature Superconductvity is a comprehensive and in-depth treatment of both experimental and theoretical methodologies by the the world's top leaders in the field. The Editor, Nobel Laureate J. Robert Schrieffer, and Associate Editor James S. Brooks, have produced a unified, coherent work providing a global view of high-temperature superconductivity covering the materials, the relationships with heavy-fermion and organic systems, and the many formidable challenges that remain.
Download or read book Engineering Ceramics written by M. Bengisu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handy reference for technicians who want to understand the nature, properties and applications, of engineering ceramics. The book meets the needs of those working in the ceramics industry, as well as of technicians and engineers involved in the application of ceramic materials.
Download or read book Engineering Superconductivity written by Peter J. Lee and published by John Wiley & Sons. This book was released on 2001-05-02 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive coverage of superconductivity from the Wiley Encyclopedia of Electrical and Electronics Engineering Engineering Superconductivity features fifty articles selected from the Wiley Encyclopedia of Electrical and Electronics Engineering, the one truly indispensable reference for electrical engineers. Superconductor technology has made highly advanced experiments possible in chemistry, biochemistry, particle physics, and health sciences, and introduced new applications currently in use in fields from medicine to cellular communications. Taken together, these articles-written by acknowledged experts in the field-provide the most complete and in-depth accounting of superconductivity in existence. The book brings together a wealth of information that would not be available to those who do not have access to the full 24-volume encyclopedia. This thorough survey looks at the application of superconductors from an engineer's practical perspective rather than a theoretical approach. Engineering Superconductivity provides full coverage of the fundamentals of superconducting behavior and explains the properties and fabrication methods of commercially produced superconductors. Up-to-date material on superconductor applications as well as competing technologies is included. The fifty articles presented here are divided into three sections: Superconductivity and magnetism Superconductors Applications and related technology Engineering Superconductivity is a complete and up-to-date reference for engineers, physicists, chemists, materials scientists, and anyone working with superconductors.
Download or read book Processing of High Temperature Superconductors at High Strain written by A.G. Mamalis and published by CRC Press. This book was released on 2019-04-23 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discovery of high-temperature superconductivity [1986] by Bendnorz and Muller in the La-BA-Cu-O system resulted in very extensive research work about the discovery and synthesis of other high-temperature superconductors, such as Y-BA-Cu-O and Bi-Sr-Ca-Cu-O. These new superconducting materials, possessing superconductivity above liquid nitrogen
Download or read book High Temperature Superconductivity 1 written by Anant V. Narlikar and published by Springer. This book was released on 2010-12-06 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Download or read book Physical Properties of High Temperature written by D M Ginsberg and published by World Scientific. This book was released on 1990-02-01 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of Physical Properties of High Temperature Superconductors I, research in the field of high temperature superconductivity has continued at a rapid pace. Volume II will contain chapters on some of the major areas of activity which were not covered extensively in Volume I: structure, microstructure, thermodynamics, oxygen stoichiometry effects, nuclear magnetic and quadrupole resonance, Hall effect, electronic structure, and the pairing state. Like Volume I, it will present authoritative and comprehensive reviews written by recognized experts in the field. This book should be useful to all students, scientists, and engineers who desire to know more about high temperature superconductivity. Contents:Introduction: A Description of Some New Materials and An Overview of This Book (D M Ginsberg)Specific Heat of High Temperature Superconductors: A Review (A Junod)Crystal Structures of High-Temperature Superconductors (R M Hazen)The Microstructure of High-Temperature Oxide Superconductors (C H Chen)Nuclear Resonance Studies of YBa2Cu3O7-δ (C H Pennington & C P Slichter)Electronic Structure, Surface Properties, and Interface Chemistry of High Temperature Superconductors (H M Meyer III & J H Weaver)The Hall Effect and its Relation to other Transport Phenomena in the Normal State of the High-Temperature Superconductors (N P Ong)Oxygen Stoichiometric Effects and Related Atomic Substitutions in the High-Tc Cuprates (L H Greene & B G Bagley)The Paining State of YBa3Cu3O7-δ (J F Annett, N Goldenfeld & S R Renn) Readership: Physicists, chemists and engineers. Keywords:Superconductivity;Specific Heat;Crystal Structure;Microstructure;Nuclear Resonance;Surfaces;Interfaces;Hall Effect;Substitutions;Oxygen;Pairing State
Download or read book European Training On Technologies And Industrial Applications Of Superconductivity Proceedings Of The Ettias 1st School written by Morini Antonio and published by World Scientific. This book was released on 1992-09-25 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our understanding of the physical world was revolutionized in the twentieth century — the era of “modern physics”. The book Introduction to Modern Physics: Theoretical Foundations, aimed at the very best students, presents the foundations and frontiers of today's physics. Typically, students have to wade through several courses to see many of these topics. The goal is to give them some idea of where they are going, and how things fit together, as they go along. The book focuses on the following topics: quantum mechanics; applications in atomic, nuclear, particle, and condensed-matter physics; special relativity; relativistic quantum mechanics, including the Dirac equation and Feynman diagrams; quantum fields; and general relativity. The aim is to cover these topics in sufficient depth that things “make sense” to students, and they achieve an elementary working knowledge of them. The book assumes a one-year, calculus-based freshman physics course, along with a one-year course in calculus. Several appendices bring the reader up to speed on any additional required mathematics. Many problems are included, a great number of which take dedicated readers just as far as they want to go in modern physics. The present book provides solutions to the over 175 problems in Introduction to Modern Physics: Theoretical Foundations in what we believe to be a clear and concise fashion.
Download or read book High Temperature Superconducting Materials written by William E. Hatfield and published by CRC Press. This book was released on 1988-04-07 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing a multidisciplinary approach reflecting distinguished contributions by chemists, physicists, materials scientists, ceramicists, and electrical engineers, this timely reference gives a unified, comprehensive treatment of superconductivity encompassing background information for beginners and pioneering research for the most advanced specialists. Complete with over 500 citations of related literature and numerous diagrams, tables, and photographs, High-Temperature Superconducting Materials includes a review of oxide superconductors' structure/property relationships and factors affecting the conduction mechanism ... chronology of developments leading to the discovery of high-temperature superconducting materials ... basic physics of superconductivity ... discussions of XANES, ac Josephson effect, thermogravimetry, EPR, electron microscopy, infrared reflectance, Raman spectroscopy, magnetic susceptibilities, and specific heat studies ... unusual features of materials with high T[subscript c]'s ... processing techniques' effects on the properties of resultant materials ... and the effects of structure and chemical composition on the superconductivity transition temperature. An authoritative appraisal of a rapidly advancing field, High-Temperature Superconducting Materials is an indispensable reference for solid-state chemists and physicists, materials scientists and engineers, ceramicists, and electrical and electronics engineers as well as advanced undergraduate and graduate students interested in superconductivity. Book jacket.
Download or read book Handbook of Superconducting Materials written by David A. Cardwell and published by CRC Press. This book was released on 2002-12-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of high temperature superconductivity and the increasing reliability of fabrication techniques, superconductor technology has moved firmly into the mainstream of academic and industrial research. There is a wealth of information on the subject but until now there has been no single source of practical information required by people working in the field. The Handbook of Superconducting Materials fills that gap by providing sensible advice and guidance on best-practice and reliable, proven fabrication and characterization techniques. It is a definitive collection of material for researchers and graduate students in materials science and electrical engineering, and practicing engineers involved in the manufacture and processing of superconducting materials. This handbook is a comprehensive guide to the techniques used to fabricate, characterize, and measure superconducting materials. Over 100 articles have been provided by more than 150 contributors, all of whom are leading researchers in their field. International editorial and advisory boards have ensured that the coverage of the handbook is unrivalled and the content is of the highest quality. Articles are written at a level suitable for graduate students as well as experienced researchers. It has been carefully edited to ensure that all the contributions are well integrated and extensive cross referencing helps the reader to navigate through the book. The handbook is an essential purchase whichever part of the field you work in and whether you are at your bench top or desk it will become a central point of reference you will not want to be without.
Download or read book High Temperature Superconductor Materials Devices and Applications written by M. Parans Paranthaman and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings investigates the relationship between features at the atomic level including oxygen vacancies, stacking faults and site order/disorder, grain boundaries, film-substrate interactions, buffer-superconductor interactions, thermodynamic, transport, and other macroscopic properties. This proceedings will also cover fundamental material properties studies, new growth methods, device and materials integration research, and developments in designing and growing new materials, all involving epitaxial superconducting thin films.
