Download or read book Engine Performance and Emission Characteristics of Soybean Biodiesel Blends written by Shubha Kartik Veeramachineni and published by . This book was released on 2010 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Exergy for A Better Environment and Improved Sustainability 2 written by Fethi Aloui and published by Springer. This book was released on 2018-08-22 with total page 1203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-disciplinary book presents the most recent advances in exergy, energy, and environmental issues. Volume 2 focuses on applications and covers current problems, future needs, and prospects in the area of energy and environment from researchers worldwide. Based on selected lectures from the Seventh International Exergy, Energy and Environmental Symposium (IEEES7-2015) and complemented by further invited contributions, this comprehensive set of contributions promote the exchange of new ideas and techniques in energy conversion and conservation in order to exchange best practices in "energetic efficiency". Applications are included that apply to the green transportation and sustainable mobility sectors, especially regarding the development of sustainable technologies for thermal comforts and green transportation vehicles. Furthermore, contributions on renewable and sustainable energy sources, strategies for energy production, and the carbon-free society constitute an important part of this book. Exergy for Better Environment and Sustainablity, Volume 2 will appeal to researchers, students, and professionals within engineering and the renewable energy fields.
Download or read book Biodiesel Combustion Performance and Emissions Characteristics written by Semakula Maroa and published by Springer Nature. This book was released on 2020-07-10 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on biodiesel combustion, including biodiesel performance, emissions and control. It brings together a range of international research in combustion studies in order to offer a comprehensive resource for researchers, students and academics alike. The book begins with an introduction to biodiesel combustion, followed by a discussion of NOx formation routes. It then addresses biodiesel production processes and oil feedstocks in detail, discusses the physiochemical properties of biodiesel, and explores the benefits and drawbacks of these properties. Factors influencing the formation of emissions, including NOx emissions, are also dealt with thoroughly. Lastly, the book discusses the mechanisms of pollution and different approaches used to reduce pollutants in connection with biodiesel. Each approach is considered in detail, and diagrams are provided to illustrate the points in line with industry standard control mechanisms.
Download or read book The Biodiesel Handbook written by Gerhard Knothe and published by Elsevier. This book was released on 2015-08-13 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this invaluable handbook covers converting vegetable oils, animal fats, and used oils into biodiesel fuel. The Biodiesel Handbook delivers solutions to issues associated with biodiesel feedstocks, production issues, quality control, viscosity, stability, applications, emissions, and other environmental impacts, as well as the status of the biodiesel industry worldwide. Incorporates the major research and other developments in the world of biodiesel in a comprehensive and practical format Includes reference materials and tables on biodiesel standards, unit conversions, and technical details in four appendices Presents details on other uses of biodiesel and other alternative diesel fuels from oils and fats
Download or read book Intelligent Manufacturing and Energy Sustainability written by A.N.R. Reddy and published by Springer Nature. This book was released on 2020-02-14 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected, high-quality papers presented at the International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES 2019) held at the Department of Mechanical Engineering, Malla Reddy College of Engineering & Technology (MRCET), Maisammaguda, Hyderabad, India, from 21 to 22 June 2019. It covers topics in the areas of automation, manufacturing technology and energy sustainability.
Download or read book Biokerosene written by Martin Kaltschmitt and published by Springer. This book was released on 2017-08-09 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed overview of aspects related to the overall provision chain for biokerosene as part of the global civil aviation business. Starting with a review of the current market situation for aviation fuels and airplanes and their demands, it then presents in-depth descriptions of classical and especially new types of non-edible biomass feedstock suitable for biokerosene provision. Subsequent chapters discuss those fuel provision processes that are already available and those still under development based on various biomass feedstock materials, and present e.g. an overview of the current state of the art in the production of a liquid biomass-based fuel fulfilling the specifications for kerosene. Further, given the growing interest of the aviation industry and airlines in biofuels for aviation, the experiences of an air-carrier are presented. In closing, the book provides a market outlook for biokerosene. Addressing a broad range of aspects related to the pros and cons of biokerosene as a renewable fuel for aviation, the book offers a unique resource.
Download or read book Compression Ignition Engine Performance for Use with Alternate Fuels written by and published by SAE International. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biodiesel written by Ayhan Demirbas and published by Springer Science & Business Media. This book was released on 2007-12-20 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodiesel: A Realistic Fuel Alternative for Diesel Engines describes the production and characterization of biodiesel. The book also presents current experimental research work in the field, including techniques to reduce biodiesel’s high viscosity. Researchers in renewable energy, as well as fuel engineers, will discover a myriad of new ideas and promising possibilities.
Download or read book Recent Technologies for Enhancing Performance and Reducing Emissions in Diesel Engines written by Basha, J. Sadhik and published by IGI Global. This book was released on 2020-02-21 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s global context, there has been extensive research conducted in reducing harmful emissions to conserve and protect our environment. In the automobile and power generation industries, diesel engines are being utilized due to their high level of performance and fuel economy. However, these engines are producing harmful pollutants that contribute to several global threats including greenhouse gases and ozone layer depletion. Professionals have begun developing techniques to improve the performance and reduce emissions of diesel engines, but significant research is lacking in this area. Recent Technologies for Enhancing Performance and Reducing Emissions in Diesel Engines is a pivotal reference source that provides vital research on technical and environmental enhancements to the emission and combustion characteristics of diesel engines. While highlighting topics such as biodiesel emulsions, nanoparticle additives, and mathematical modeling, this publication explores the potential additives that have been incorporated into the performance of diesel engines in order to positively affect the environment. This book is ideally designed for chemical and electrical engineers, developers, researchers, power generation professionals, mechanical practitioners, scholars, ecologists, scientists, graduate students, and academicians seeking current research on modern innovations in fuel processing and environmental pollution control.
Download or read book Advances in Heat Transfer and Fluid Dynamics written by Mohammad Altamush Siddiqui and published by Springer Nature. This book was released on with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuels and Engines written by Jean-Claude Guibet and published by Editions Technips. This book was released on 1999 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, more than ever, the subject of fuels and engines arouses keen interest and provokes lively debate among specialists and the general public. This book describes in extensive detail the new technologies that are currently in use or under development that are designed to provide high-quality fuels and ensure their optimal use in the engines used to power automobiles, trucks, aircraft, and ships. All types of fuels are covered: gasoline, diesel fuels, liquefied petroleum gas, natural gas, biofuels, jet fuels, and fuels for special uses. The specific situations encountered in each region of the world, including the United States, Europe, Japan, and the developing countries, are analyzed and compared, with a focus on energy, economics, and politics. This book is a scientific work, yet easy to read; it is objective, yet actively involved. It is thus an excellent reference work for those seeking pertinent, reliable, and comprehensive information on the subject of fuels and engines.
Download or read book Greener and Scalable E fuels for Decarbonization of Transport written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2021-12-10 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights ways of using gaseous and liquid e-fuels like hydrogen (H2), methane (CH4), methanol (CH3OH), DME (CH3-O-CH3), Ammonia (NH3), synthetic petrol and diesel, etc in existing engines and their effects on tailpipe emissions. The contents also cover calibration and optimization procedure for adaptation of these fuels. the volume also discusses the economical aspect of these fuels. Chapters include recent results and are focused on current trends of automotive sector. This book will be of interest to those in academia and industry involved in fuels, IC engines, engine instrumentation, and environmental research.
Download or read book Advances in Environment Engineering and Management written by Nihal Anwar Siddiqui and published by Springer Nature. This book was released on 2021-09-02 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the First National Conference on “Sustainable Management of Environment & Natural Resource through Innovation in Science and Technology” (SMTST2020). The book highlights the latest development and innovations in the fields of sustainability, natural resource management, ecology and its environmental fields, geosciences and geology, atmospheric sciences, sustainability, climate change, and extreme weather, global warming, and global change, the effect of climate change on the ecosystem, environment, and pollution, as well as putting a strong emphasis on the multidisciplinary studies.
Download or read book Advances in Material Science and Engineering written by Seyed Sattar Emamian and published by Springer Nature. This book was released on 2022-10-05 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the recent research works on mechanical, manufacturing and plant engineering presented during the 7th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE 2021) held on 29th November 2021. It highlights the latest advances in the emerging areas, brings together researchers and professionals in the field and provides a valuable platform for exchanging ideas and fostering collaboration. Addressing real-world problems concerning joining technologies that are at the heart of various manufacturing sectors, the respective papers present the outcomes of the latest experimental and numerical work on problems in soldering, arc welding and solid-state joining technologies.
Download or read book Proceedings of China SAE Congress 2018 Selected Papers written by China Society of Automotive Engineers (China SAE) and published by Springer Nature. This book was released on 2019-10-25 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings volume gathers outstanding papers submitted to Proceedings of China SAE Congress 2018: Selected Papers, the majority of which are from China – the largest car-maker as well as most dynamic car market in the world. The book covers a wide range of automotive topics, presenting the latest technical advances and approaches to help technicians solve the practical problems that most affect their daily work. It is intended for researchers, engineers and postgraduate students in the fields of automotive engineering and related areas.
Download or read book Recent Advances in Thermal Sciences and Engineering written by Hemant B. Mehta and published by Springer Nature. This book was released on 2023-05-05 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advances in Fluid Flow and Thermal Sciences (ICAFFTS 2021) and summarizes the modern research practices in thermal sciences and engineering. The content of book involves advanced topics in heat transfer science, automobile, refrigeration and air conditioning, cryogenics, non-conventional systems and energy storage. Topics on cutting edge research in the area of hybrid nano-PCM-based systems, solar-based applications, bio-diesel and nano additives-based combustion, fuel cell and thermoacoustic engine are also included. In addition, this book contains recent research in the area of two-phase thermal management of Li-Ion/Li-titanium battery and LED systems using heat sink, heat pipe, pulsating heat pipe and thermosyphon with next-generation refrigerants, PCM and nanofluid. Some thermal aspects of virus/aerosol research, advances in volumetric velocimetry and application of artificial intelligence in thermal systems are also covered. This book is a valuable reference for academicians, researchers and professionals working in the various fields of thermal sciences.
Download or read book Computing in Engineering and Technology written by Brijesh Iyer and published by Springer Nature. This book was released on 2019-10-16 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of selected high quality research papers presented at the International Conference on Computing in Engineering and Technology (ICCET 2019), held on January 10–11, 2019 at Deogiri Institute of Engineering and Management Studies, Aurangabad, India. Focusing on frontier topics and next-generation technologies, it presents original and innovative research from academics, scientists, students, and engineers alike.
