Download or read book Engine CHP Emission Control Technology written by Keith Davidson and published by . This book was released on 2011 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combined Heat and Power written by Paul Breeze and published by Academic Press. This book was released on 2017-11-30 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined Heat and Power Generation is a concise, up-to-date and accessible guide to the combined delivery of heat and power to anything, from a single home to a municipal power plant. Breeze discusses the historical background for CHP and why it is set to be a key emission control strategy for the 21st Century. Various technologies such as piston engines, gas turbines and fuel cells are discussed. Economic and environmental factors also are considered and analyzed, making this a very valuable resource for those involved with the research, design, implementation and management of the provision of heat and power. - Discusses the historical background of combined heat and power usage and why CHP is seen as a key emission control strategy for the 21st Century - Explores the technological aspects of CHP in a clear and concise style and delves into various key technologies, such as piston engines, steam and gas turbines and fuel cells - Evaluates the economic factors of CHP and the installation of generation systems, along with energy conversion efficiencies
Download or read book Natural Gas Engines written by Kalyan Kumar Srinivasan and published by Springer. This book was released on 2018-11-03 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the various advanced reciprocating combustion engine technologies that utilize natural gas and alternative fuels for transportation and power generation applications. It is divided into three major sections consisting of both fundamental and applied technologies to identify (but not limited to) clean, high-efficiency opportunities with natural gas fueling that have been developed through experimental protocols, numerical and high-performance computational simulations, and zero-dimensional, multizone combustion simulations. Particular emphasis is placed on statutes to monitor fine particulate emissions from tailpipe of engines operating on natural gas and alternative fuels.
Download or read book Small and Micro Combined Heat and Power CHP Systems written by R Beith and published by Elsevier. This book was released on 2011-04-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance.Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems.Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology.With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. - Reviews small- and micro-CHP systems and their techno-economic and performance assessment - Explores integration into distributed energy systems and their increasing utilisation of biomass fuels - Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines
Download or read book Engine Emission Control Technologies written by G. Amba Prasad Rao and published by CRC Press. This book was released on 2020-06-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume covers the important issues related to environmental emissions from SI and CI engines as well as their formation and various pollution mitigation techniques. The book addresses aspects of improvements in engine modification, such as design modifications for enhanced performance, both with conventional fuels as well as with new and alternative fuels. It also explores some new combustion concepts that will help to pave the way for complying with new emission concepts. Alternative fuels are addressed in this volume to help mitigate harmful emissions, and alternative power sources for automobiles are also discussed briefly to cover the switch over from fueled engines to electrics, including battery-powered electric vehicles and fuel cells. The authors explain the different technologies available to date to overcome the limitations of conventional prime movers (fueled by both fossil fuels and alternative fuels). Topics examined include: • Engine modifications needed to limit harmful emissions • The use of engine after-treatment devices to contain emissions • The development of new combustion concepts • Adoption of alternative fuels in existing engines • Switching over to electrics—advantages and limitations • Specifications of highly marketed automobiles • Emission measurement methods
Download or read book Emissions Control Technology Assessment of Heavy Duty Vehicle Engines written by Charles M. Urban ((Of the Southwest Research Institute, United States Environmental Protection Agency)) and published by . This book was released on 1973 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainable On Site CHP Systems Design Construction and Operations written by Milton Meckler and published by McGraw Hill Professional. This book was released on 2010-01-04 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROVEN TECHNIQUES FOR REDUCING ENERGY USE WITH CHP SYSTEMS Plan, design, construct, and operate a sustainable on-site CHP (combined heat and power) facility using the detailed information in this practical guide. Sustainable On-Site CHP Systems reveals how to substantially increase the energy efficiency in commercial, industrial, institutional, and residential buildings using waste heat and thermal energy from power generation equipment for cooling, heating, and humidity control. In-depth case studies illustrate real-world applications of CHP systems. Coverage includes: CHP basics, power equipment, and thermal design Packaged CHP systems Regulatory issues Carbon footprint, environmental benefits, and emission controls Conducting a feasibility study and economic analysis CHP plant design and engineering Construction, permits, and risk management Operation and maintenance Performance monitoring and improvement
Download or read book Power Generation Technologies written by Paul Breeze and published by Newnes. This book was released on 2014-03-24 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of Power Generation Technologies is a concise and readable guide that provides an introduction to the full spectrum of currently available power generation options, from traditional fossil fuels and the better established alternatives such as wind and solar power, to emerging renewables such as biomass and geothermal energy. Technology solutions such as combined heat and power and distributed generation are also explored. However, this book is more than just an account of the technologies – for each method the author explores the economic and environmental costs and risk factors. Each technology is covered using the same basic criteria so that comparisons between technologies can be made more easily. Those involved in planning and delivering energy – including engineers, managers and policy makers – will find in this book a guide through the minefield of maintaining a reliable power supply, meeting targets on greenhouse gas emissions, and addressing economic and social objectives. - Provides a unique comparison of a wide range of power generation technologies from oil, coal, nuclear and natural gas, to geothermal, wind, solar, and bioenergy - Hundreds of diagrams demystify how each technology functions in practice - Evaluates the economic and environmental viability of each power generation system covered - New chapters covering fast-advancing renewable and alternative power sources such as municipal waste and concentrating solar plants - Fresh focus the evolution of traditional technologies such as natural gas and "clean coal" - Expanded coverage of distributed power generation and CHP (combined heat and power) technologies
Download or read book Renewable Energy Systems written by Martin Kaltschmitt and published by Springer. This book was released on 2012-12-06 with total page 1898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity is facing a steadily diminishing supply of fossil fuels, causing researchers, policy makers, and the population as a whole to turn increasingly to alternative and especially renewable sources of energy to make up this deficit. Gathering over 80 peer-reviewed entries from the Encyclopedia of Sustainability Science and Technologies, Renewable Energy Systems provides an authoritative introduction to a wide variety of renewable energy sources. State-of-the-art coverage includes geothermal power stations, ocean energy, renewable energy from biomass, waste to energy, and wind power. This comprehensive, two-volume work provides an excellent introduction for those entering these fields, as well as new insights for advanced researchers, industry experts, and decision makers.
Download or read book Modular Systems for Energy Usage Management written by Yatish T. Shah and published by CRC Press. This book was released on 2020-01-22 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: "...[a] very unique book that integrates benefits of modular systems for enhanced sustainability to meet the global challenges of rapid and sometimes uncontrolled industrialization in the 21st century."—Pinakin Patel, T2M Global This book examines the role of the modular approach for the back end of the energy industry—energy usage management. It outlines the use of modular approaches for the processes used to improve energy conservation and efficiency, which are preludes to the prudent use of energy. Since energy consumption is conventionally broken down into four sectors—residential, transportation, industrial, and commercial—the discussions on energy usage management are also broken down into these four sectors in the book. The book examines the use of modular systems for five application areas that cover the sectors described above: buildings, vehicles, computers and electrical/electronic products, district heating, and wastewater treatment and desalination. This book also discusses the use of a modular approach for energy storage and transportation. Finally, it describes how the modular approach facilitates bottom-up, top-down, and hybrid simulation and modeling of the energy systems from various scientific and socioeconomic perspectives. Aimed at industry professionals and researchers involved in the energy industry, this book illustrates in detail, with the help of concrete industrial examples, how a modular approach can facilitate management of energy usage.
Download or read book Research to Develop Best Available Control Technology for Combined Heat and Power Units Operated on Dairy derived Biogas written by Frank Mitloehner and published by . This book was released on 2015 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of the 21st Century Truck Partnership written by National Research Council and published by National Academies Press. This book was released on 2008-10-19 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 21st Century Truck Partnership (21CTP), a cooperative research and development partnership formed by four federal agencies with 15 industrial partners, was launched in the year 2000 with high hopes that it would dramatically advance the technologies used in trucks and buses, yielding a cleaner, safer, more efficient generation of vehicles. Review of the 21st Century Truck Partnership critically examines and comments on the overall adequacy and balance of the 21CTP. The book reviews how well the program has accomplished its goals, evaluates progress in the program, and makes recommendations to improve the likelihood of the Partnership meeting its goals. Key recommendations of the book include that the 21CTP should be continued, but the future program should be revised and better balanced. A clearer goal setting strategy should be developed, and the goals should be clearly stated in measurable engineering terms and reviewed periodically so as to be based on the available funds.
Download or read book New Engine Technology for California s Combined Heat and Power Market written by Jean Roy and published by . This book was released on 2013 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Greenhouse Gas Control Technologies written by B. Eliasson and published by Elsevier. This book was released on 1999-05-20 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain 270 papers outlining ideas and contributions to the new scientific, technical and political discipline of Greenhouse Gas (GHG) Control. The contributions were presented at the 4th International Conference on Greenhouse Gas Control Technologies (GHGT-4). It was the largest gathering of experts active in this new and fast-developing field.GHGT-4 was different from its predecessors in that it included all greenhouse gases, not only CO2, and all issues which could contribute to the mitigation of the greenhouse problem - technical, economic and political. The main focus was on practical solutions and real demonstrations of mitigation technology being planned and implemented today. It also addressed ways to increase the efficiency of power production and utilisation, and looked at proposals to encourage the development of renewable energy sources.During the Opening Session, 10 keynote addresses were heard from prominent personalities in government, industry and academia. To tackle this very inter-disciplinary problem and to achieve acceptable solutions, it is essential for industry and government to initiate intense dialogue and cooperation. Conferences like this can provide the opportunity for a meeting of minds between engineers and politicians in the face of global challenge. The primary attributes of this global challenge are manifold: the problem is global and international; it is inter-disciplinary, both in substance and approach; it covers technical, political and economic issues and involves government, science, industry and academia; it is complex and non-linear; and it will take the efforts of all parties involved to solve the problem.These proceedings contain ideas for starting demonstration projects and for making better use of the power and flexibility of market measures. They also show it is a problem we can influence and that there is a wealth of ideas. The challenge now is to find the right partners to put these ideas into action.
Download or read book Cogeneration written by Christos A. Frangopoulos and published by IET. This book was released on 2017-03-10 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive, integrated treatment of cogeneration technologies and systems. Also called combined heat and power (CHP), cogeneration is the use of a power station to deliver two or more useful forms of energy (e.g. generating electricity and heat at the same time). All conventional, fuel-based plants generate heat as by-product, which is often wasted. Cogeneration captures part of this heat for delivery to consumers. The book gives a tour of the available cogeneration technologies and their features. It provides plenty of instructive examples of cogeneration projects to illustrate key concepts, and also covers the relevant regulatory and legal frameworks. It is an ideal text/reference for anyone working in power systems and energy engineering. Topics covered include: * Benefits of cogeneration * Cogeneration technologies * Electrical engineering aspects * Applications of cogeneration * Fuels for cogeneration systems * Thermodynamic analysis * Environmental impacts of cogeneration * Reliability and availability * Economic analysis of cogeneration systems * Regulatory and legal frameworks * Selection, integration and operation of cogeneration systems * Simulation and optimisation * Synthesis, design and operation * Examples of cogeneration projects * Research and development of cogeneration * Summary and conclusions
Download or read book Advanced Energy Systems Second Edition written by Nikolai V. Khartchenko and published by CRC Press. This book was released on 2013-12-20 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition to a popular first provides a comprehensive, fully updated treatment of advanced conventional power generation and cogeneration plants, as well as alternative energy technologies. Organized into two parts: Conventional Power Generation Technology and Renewable and Emerging Clean Energy Systems, the book covers the fundamentals, analysis, design, and practical aspects of advanced energy systems, thus supplying a strong theoretical background for highly efficient energy conversion. New and enhanced topics include: Large-scale solar thermal electric and photovoltaic (PV) plants Advanced supercritical and ultra-supercritical steam power generation technologies Advanced coal- and gas-fired power plants (PP) with high conversion efficiency and low environmental impact Hybrid/integrated (i.e., fossil fuel + REN) power generation technologies, such as integrated solar combined-cycle (ISCC) Clean energy technologies, including "clean coal," H2 and fuel cell, plus integrated power and cogeneration plants (i.e., conventional PP + fuel cell stacks) Emerging trends, including magnetohydrodynamic (MHD)-generator and controlled thermonuclear fusion reactor technologies with low/zero CO2 emissions Large capacity offshore and on-land wind farms, as well as other renewable (REN) power generation technologies using hydro, geothermal, ocean, and bio energy systems Containing over 50 solved examples, plus problem sets, full figures, appendices, references, and property data, this practical guide to modern energy technologies serves energy engineering students and professionals alike in design calculations of energy systems.
Download or read book Fossil Energy Update written by and published by . This book was released on 1981 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
