Download or read book Energy Related Material Flow Simulation in Production and Logistics written by Sigrid Wenzel and published by Springer Nature. This book was released on 2024-01-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides for the first time an overview on the current approaches and applications of energy aspects in production and logistics by the use of simulation techniques. During the last decade, the importance of energy in the material flow processes has become more and more important. The pressure to reduce the environmental footprint of production and logistics systems will even intensify in future. Therefore, enterprises have started to integrate the use of energy into their planning processes much more than before, even designing feedback loops, e.g., from energy control to production control. This receives additional attention with the increasing use of renewable, but less reliable, energy sources. Care must be taken to establish processes that aim to use energy when it is available. As an example, many industrial processes like melting or coating have significant energy demands, but could vary the point of time of its consumption within specific limits, leading to a very high complexity. It discusses the construction and application of energy-specific performance indicators and analyzes the input information that needs to be acquired before implementing suitable models. On this basis, concrete technical solutions are introduced.
Download or read book Simulation based Optimization of Energy Efficiency in Production written by Anna Carina Römer and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of the energy and commodity markets has steadily increased since the first oil crisis. The sustained use of energy and other resources has become a basic requirement for a company to competitively perform on the market. The modeling, analysis and assessment of dynamic production processes is often performed using simulation software. While existing approaches mainly focus on the consideration of resource consumption variables based on metrologically collected data on operating states, the aim of this work is to depict the energy consumption of production plants through the utilization of a continuous simulation approach in combination with a discrete approach for the modeling of material flows and supporting logistic processes. The complex interactions between the material flow and the energy usage in production can thus be simulated closer to reality, especially the depiction of energy consumption peaks becomes possible. An essential step towards reducing energy consumption in production is the optimization of the energy use of non-value-adding production phases. About the author: Anna Carina Römer was an external doctoral student at the Department of Information Technology in Production and Logistics at the Technische Universität Ilmenau. The main focus of her research was on hybrid simulation models, with a focus on both the conceptual design of hybrid simulation models and the use of hybrid models for the optimization of energy consumption in production plants.
Download or read book Development of Material Flow Logistics for a Manufacturing Facility Using Simulation written by William C. Moor and published by . This book was released on 1985* with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Simulation Model for the Evaluation of Material Flow Logistics of Production Processes written by Mark R. Bass and published by . This book was released on 1984 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Manufacturing and Sustainable Logistics written by Wilhelm Dangelmaier and published by Springer Science & Business Media. This book was released on 2010-04-12 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intimesofdecliningeconomicgrowth,companieshavetocontroltheircostsmore than ever to saveresources needed in the future. Regardless of the economic size of the company, the processes of production and logistics play a decisive role in stabilizing procedures and avoiding waste. Both are important cost drivers in manufacturing companies and therefore they o?er large potential savings. Pervasive networking in the last years has contributed to a hitherto unknown transparency of global markets. This harmonization opened up new possibilities of entering foreign markets for procurement and sales to the companies. The emerging global procurement strategy was understood as a chance to rethink the relocation of existing production facilities to pro?t from existing di?erences in price and performance as a resource-saving factor. Many companies tended towards a reduction of their vertical integration by outsourcing sections of their value chain. These contracted services of production result in higher transport volumes, increased complexity of supply processes and new requirements on - gistic networks. This trend of outsourcing has not stopped, but is slowing down noticeably. Additionally,thereisanincreasingproportionofcompaniesrestoring business units that were outsourced before. Reasons for turning back decisions are often to be found in missed goals. It is not unusual that important cost f- tors were disregarded in the original basis of decision-making. In the meantime many companies have realized that it is easier to achieve stability of processes and therewith a control of costs by increasing their own contribution to p- duction. Especially in times of under-utilized capacities like in the current crisis, insourcingcanbeastrategicoption.
Download or read book Planning of Eco efficient Process Chains for Automotive Component Manufacturing written by Christopher Schmidt and published by Springer Nature. This book was released on 2021-01-04 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the introduction of emerging manufacturing technologies and planning cases with established technologies. The planning of eco-efficient process chains is crucial for manufacturing companies. However, in the state-of-the-art planning, various barriers exist towards the integration of the environmental dimension. Against this background, a concept for the integration of classic lean and environmental criteria into the three planning phases of process chains is presented. During concept planning, the Technology Assessment Tool supports planners in the identification of eco-efficient technologies. During rough planning, the Value Stream Design Tool enables the derivation of a production line based on workpiece characteristics. For detailed planning, tools for eco-efficient machine and process chain configuration are provided. Three case studies from large-scale automotive component manufacturing with established and emerging technologies demonstrate the tool applicability.
Download or read book Advanced Material Engineering Proceedings Of The 2015 International Conference written by Yongchang Liu and published by World Scientific. This book was released on 2015-09-08 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents a collection of papers presented at the 2015 International Conference on Advanced Material Engineering (AME 2015), held in Guangzhou, China. With the rapid development of industry and information technology, researchers across all fields began to discuss new ideas related to materials science and manufacturing technology. This proceedings provide a valuable insight from researchers and scientists who exchanged their ideas in the conference.
Download or read book Advances in Production Management Systems Innovative and Knowledge Based Production Management in a Global Local World written by Bernard Grabot and published by Springer. This book was released on 2014-08-26 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volumes IFIP AICT 438, 439, and 440 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2014, held in Ajaccio, France, in September 2014. The 233 revised full papers were carefully reviewed and selected from 271 submissions. They are organized in 6 parts: knowledge discovery and sharing; knowledge-based planning and scheduling; knowledge-based sustainability; knowledge-based services; knowledge-based performance improvement, and case studies.
Download or read book Simulation Approach Towards Energy Flexible Manufacturing Systems written by Jan Beier and published by Springer. This book was released on 2017-03-23 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authored monograph provides in-depth analysis and methods for aligning electricity demand of manufacturing systems to VRE supply. The book broaches both long-term system changes and real-time manufacturing execution and control, and the author presents a concept with different options for improved energy flexibility including battery, compressed air and embodied energy storage. The reader will also find a detailed application procedure as well as an implementation into a simulation prototype software. The book concludes with two case studies. The target audience primarily comprises research experts in the field of green manufacturing systems.
Download or read book Handbook of Research on Integrating Industry 4 0 in Business and Manufacturing written by Karabegovi?, Isak and published by IGI Global. This book was released on 2020-03-27 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Industry 4.0, industrial productions are adjusted to complete smart automation, which means introducing self-automation methods, self-configuration, self-diagnosis of problems and removal, cognition, and intelligent decision making. This implementation of Industry 4.0 brings about a change in business paradigms and production models, and this will be reflected at all levels of the production process including supply chains and will involve all workers in the production process from managers to cyber-physical systems designers and customers as end-users. The Handbook of Research on Integrating Industry 4.0 in Business and Manufacturing is an essential reference source that explores the development and integration of Industry 4.0 by examining changes and innovations to manufacturing processes as well as its applications in different industrial areas. Featuring coverage on a wide range of topics such as cyber physical systems, integration criteria, and artificial intelligence, this book is ideally designed for mechanical engineers, electrical engineers, manufacturers, supply chain managers, logistics specialists, investors, managers, policymakers, production scientists, researchers, academicians, and students at the postgraduate level.
Download or read book Research Anthology on Clean Energy Management and Solutions written by Management Association, Information Resources and published by IGI Global. This book was released on 2021-06-25 with total page 2002 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy usage and consumption continue to rise globally each year, with the most efficient and cost-effective energy sources causing huge impacts to the environment. In an effort to mitigate harmful effects to the environment, implementing clean energy resources and utilizing green energy management strategies have become worldwide initiatives, with many countries from all regions quickly becoming leaders in renewable energy usage. Still, not every energy resource is without flaws. Researchers must develop effective and low-cost strategies for clean energy in order to find the balance between production and consumption. The Research Anthology on Clean Energy Management and Solutions provides in-depth research that explores strategies and techniques used in the energy production field to optimize energy efficiency in order to maintain clean and safe use while delivering ample energy coverage. The anthology also seeks solutions to energy that have not yet been optimized or are still produced in a way that is harmful to the environment. Covering topics such as hydrogen fuel cells, renewable energy, solar power, solar systems, cost savings, and climate protection, this text is essential for electrical engineers, nuclear engineers, environmentalists, managers, policymakers, government officials, professionals in the energy industry, researchers, academicians, and students looking for the latest research on clean energy management.
Download or read book Advances in Production Management Systems Competitive Manufacturing for Innovative Products and Services written by Christos Emmanouilidis and published by Springer. This book was released on 2013-08-13 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes IFIP AICT 397 and 398 constitute the thoroughly refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2012, held in Rhodes, Greece, in September 2012. The 182 revised full papers were carefully reviewed and selected for inclusion in the two volumes. They are organized in 6 parts: sustainability; design, manufacturing and production management; human factors, learning and innovation; ICT and emerging technologies in production management; product and asset lifecycle management; and services, supply chains and operations.
Download or read book Material Flow Systems in Manufacturing written by J.M. Tanchoco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of contributions related to the design and control of material flow systems in manufacturing. Material flow systems in manufacturing covers a broad spectrum of topics directly affecting issues related to facilities design, material handling and production planning and control. In selecting the papers to include in this book, the scope was limited to the design and operational control aspects related to the physical move ment of parts, tools, containers and material handling devices. Recent develop ments in this area naturally led to concentration on flow systems involving cellular manufacturing, and automated transport equipment such as automated guided vehicles. However, the concepts discussed have general applicability to a wide range of manufacturing flow problems. The book is organized in five major sections: 1. design integration and justification; 2. cell design and material handling considerations; 3. alternative material flow paths; 4. operational control problems; and 5. tooling requirements and transport equipment.
Download or read book Manufacturing Systems and Technologies for the New Frontier written by Mamoru Mitsuishi and published by Springer Science & Business Media. This book was released on 2008-05-14 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collected here are 112 papers concerned with all manner of new directions in manufacturing systems given at the 41st CIRP Conference on Manufacturing Systems. The high-quality material presented in this volume includes reports of work from both scientific and engineering standpoints and several invited and keynote papers addressing the current cutting edge and likely future trends in manufacturing systems. The book’s subjects include: (1) new trends in manufacturing systems design: sustainable design, ubiquitous manufacturing, emergent synthesis, service engineering, value creation, cost engineering, human and social aspects of manufacturing, etc.; (2) new applications for manufacturing systems – medical, life-science, optics, NEMS, etc.; (3) intelligent use of advanced methods and new materials – new manufacturing process technologies, high-hardness materials, bio-medical materials, etc.; (4) integration and control for new machines – compound machine tools, rapid prototyping, printing process integration, etc.
Download or read book Quantitative Analysis and Optimal Control of Energy Efficiency in Discrete Manufacturing System written by Yan Wang and published by Springer Nature. This book was released on 2020-06-01 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides energy efficiency quantitative analysis and optimal methods for discrete manufacturing systems from the perspective of global optimization. In order to analyze and optimize energy efficiency for discrete manufacturing systems, it uses real-time access to energy consumption information and models of the energy consumption, and constructs an energy efficiency quantitative index system. Based on the rough set and analytic hierarchy process, it also proposes a principal component quantitative analysis and a combined energy efficiency quantitative analysis. In turn, the book addresses the design and development of quantitative analysis systems. To save energy consumption on the basis of energy efficiency analysis, it presents several optimal control strategies, including one for single-machine equipment, an integrated approach based on RWA-MOPSO, and one for production energy efficiency based on a teaching and learning optimal algorithm. Given its scope, the book offers a valuable guide for students, teachers, engineers and researchers in the field of discrete manufacturing systems.
Download or read book Sustainable Food Supply Chains written by Riccardo Accorsi and published by Academic Press. This book was released on 2019-06-12 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Food Supply Chains: Planning, Design, and Control through Interdisciplinary Methodologies provides integrated and practicable solutions that aid planners and entrepreneurs in the design and optimization of food production-distribution systems and operations and drives change toward sustainable food ecosystems. With synthesized coverage of the academic literature, this book integrates the quantitative models and tools that address each step of food supply chain operations to provide readers with easy access to support-decision quantitative and practicable methods. Broken into three parts, the book begins with an introduction and problem statement. The second part presents quantitative models and tools as an integrated framework for the food supply chain system and operations design. The book concludes with the presentation of case studies and applications focused on specific food chains. Sustainable Food Supply Chains: Planning, Design, and Control through Interdisciplinary Methodologies will be an indispensable resource for food scientists, practitioners and graduate students studying food systems and other related disciplines. Contains quantitative models and tools that address the interconnected areas of the food supply chain Synthesizes academic literature related to sustainable food supply chains Deals with interdisciplinary fields of research (Industrial Systems Engineering, Food Science, Packaging Science, Decision Science, Logistics and Facility Management, Supply Chain Management, Agriculture and Land-use Planning) that dominate food supply chain systems and operations Includes case studies and applications
Download or read book Research Anthology on Digital Transformation Organizational Change and the Impact of Remote Work written by Management Association, Information Resources and published by IGI Global. This book was released on 2020-10-30 with total page 2049 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the use of remote work has recently skyrocketed, digital transformation within the workplace has gone under a microscope, and it has become abundantly clear that the incorporation of new technologies in the workplace is the future of business. These technologies keep businesses up to date with their capabilities to perform remote work and make processes more efficient and effective than ever before. In understanding digital transformation in the workplace there needs to be advanced research on technology, organizational change, and the impacts of remote work on the business, the employees, and day-to-day work practices. This advancement to a digital work culture and remote work is rapidly undergoing major advancements, and research is needed to keep up with both the positives and negatives to this transformation. The Research Anthology on Digital Transformation, Organizational Change, and the Impact of Remote Work contains hand-selected, previously published research that explores the impacts of remote work on business workplaces while also focusing on digital transformation for improving the efficiency of work. While highlighting work technologies, digital practices, business management, organizational change, and the effects of remote work on employees, this book is an all-encompassing research work intended for managers, business owners, IT specialists, executives, practitioners, stakeholders, researchers, academicians, and students interested in how digital transformation and remote work is affecting workplaces.
