Download or read book Energy Reduction at U S Air Force Facilities Using Industrial Processes written by National Research Council and published by National Academies Press. This book was released on 2013-03-04 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Defense (DoD) is the largest consumer of energy in the federal government. In turn, the U.S. Air Force is the largest consumer of energy in the DoD, with a total annual energy expenditure of around $10 billion. Approximately 84 percent of Air Force energy use involves liquid fuel consumed in aviation whereas approximately 12 percent is energy (primarily electricity) used in facilities on the ground. This workshop was concerned primarily with opportunities to reduce energy consumption within Air Force facilities that employ energy intensive industrial processes-for example, assembly/disassembly, painting, metal working, and operation of radar facilities-such as those that occur in the maintenance depots and testing facilities. Air Force efforts to reduce energy consumption are driven largely by external goals and mandates derived from Congressional legislation and executive orders. To date, these goals and mandates have targeted the energy used at the building or facility level rather than in specific industrial processes. In response to a request from the Deputy Assistant Secretary of the Air Force for Energy and the Deputy Assistant Secretary of the Air Force for Science, Technology, and Engineering, the National Research Council, under the auspices of the Air Force Studies Board, formed the Committee on Energy Reduction at U.S. Air Force Facilities Using Industrial Processes: A Workshop. The terms of reference called for a committee to plan and convene one 3 day public workshop to discuss: (1) what are the current industrial processes that are least efficient and most cost ineffective? (2) what are best practices in comparable facilities for comparable processes to achieve energy efficiency? (3) what are the potential applications for the best practices to be found in comparable facilities for comparable processes to achieve energy efficiency? (4) what are constraints and considerations that might limit applicability to Air Force facilities and processes over the next ten year implementation time frame? (5) what are the costs and paybacks from implementation of the best practices? (6) what will be a proposed resulting scheme of priorities for study and implementation of the identified best practices? (7) what does a holistic representation of energy and water consumption look like within operations and maintenance?
Download or read book Energy Reduction at U S Air Force Facilities Using Industrial Processes written by and published by . This book was released on 2013 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Department of Defense (DoD) is the largest consumer of energy in the federal government. In turn, the U.S. Air Force is the largest consumer of energy in the DoD, with a total annual energy expenditure of around 10 billion dollars. Approximately 84 percent of Air Force energy use involves liquid fuel consumed in aviation whereas approximately 12 percent is energy (primarily electricity) used in facilities on the ground. This workshop was concerned primarily with opportunities to reduce energy consumption within Air Force facilities that employ energy intensive industrial processes for example, assembly/disassembly, painting, metal working, and operation of radar facilities such as those that occur in the maintenance depots and testing facilities. Air Force efforts to reduce energy consumption are driven largely by external goals and mandates derived from Congressional legislation and executive orders. To date, these goals and mandates have targeted the energy used at the building or facility level rather than in specific industrial processes. In response to a request from the Deputy Assistant Secretary of the Air Force for Energy and the Deputy Assistant Secretary of the Air Force for Science, Technology, and Engineering, the National Research Council, under the auspices of the Air Force Studies Board, formed the Committee on Energy Reduction at U.S. Air Force Facilities Using Industrial Processes: A Workshop. The terms of reference called for a committee to plan and convene one 3 day public workshop to discuss: (1) what are the current industrial processes that are least efficient and most cost ineffective? (2) what are best practices in comparable facilities for comparable processes to achieve energy efficiency? (3) what are the potential applications for the best practices to be found in comparable facilities for comparable processes to achieve energy efficiency? (4) what are constraints and considerations that might limit applicability to Air Force facilities and processes over the next ten year implementation time frame? (5) what are the costs and paybacks from implementation of the best practices? (6) what will be a proposed resulting scheme of priorities for study and implementation of the identified best practices? (7) what does a holistic representation of energy and water consumption look like within operations and maintenance?"--Publisher's description.
Download or read book Energy Reduction at U S Air Force Facilities Using Industrial Processes written by and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Department of Defense (DoD) is the largest consumer of energy in the federal government. In turn, the U.S. Air Force is the largest consumer of energy in the DoD, with a total annual energy expenditure of around 10 billion dollars. Approximately 84 percent of Air Force energy use involves liquid fuel consumed in aviation whereas approximately 12 percent is energy (primarily electricity) used in facilities on the ground. This workshop was concerned primarily with opportunities to reduce energy consumption within Air Force facilities that employ energy intensive industrial processes for example, assembly/disassembly, painting, metal working, and operation of radar facilities such as those that occur in the maintenance depots and testing facilities. Air Force efforts to reduce energy consumption are driven largely by external goals and mandates derived from Congressional legislation and executive orders. To date, these goals and mandates have targeted the energy used at the building or facility level rather than in specific industrial processes. In response to a request from the Deputy Assistant Secretary of the Air Force for Energy and the Deputy Assistant Secretary of the Air Force for Science, Technology, and Engineering, the National Research Council, under the auspices of the Air Force Studies Board, formed the Committee on Energy Reduction at U.S. Air Force Facilities Using Industrial Processes: A Workshop. The terms of reference called for a committee to plan and convene one 3 day public workshop to discuss: (1) what are the current industrial processes that are least efficient and most cost ineffective? (2) what are best practices in comparable facilities for comparable processes to achieve energy efficiency? (3) what are the potential applications for the best practices to be found in comparable facilities for comparable processes to achieve energy efficiency? (4) what are constraints and considerations that might limit applicability to Air Force facilities and processes over the next ten year implementation time frame? (5) what are the costs and paybacks from implementation of the best practices? (6) what will be a proposed resulting scheme of priorities for study and implementation of the identified best practices? (7) what does a holistic representation of energy and water consumption look like within operations and maintenance?"--Publisher's description.
Download or read book Energy Reduction at U S Air Force Facilities Using Industrial Processes written by National Research Council and published by National Academies Press. This book was released on 2013-02-04 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Defense (DoD) is the largest consumer of energy in the federal government. In turn, the U.S. Air Force is the largest consumer of energy in the DoD, with a total annual energy expenditure of around $10 billion. Approximately 84 percent of Air Force energy use involves liquid fuel consumed in aviation whereas approximately 12 percent is energy (primarily electricity) used in facilities on the ground. This workshop was concerned primarily with opportunities to reduce energy consumption within Air Force facilities that employ energy intensive industrial processes-for example, assembly/disassembly, painting, metal working, and operation of radar facilities-such as those that occur in the maintenance depots and testing facilities. Air Force efforts to reduce energy consumption are driven largely by external goals and mandates derived from Congressional legislation and executive orders. To date, these goals and mandates have targeted the energy used at the building or facility level rather than in specific industrial processes. In response to a request from the Deputy Assistant Secretary of the Air Force for Energy and the Deputy Assistant Secretary of the Air Force for Science, Technology, and Engineering, the National Research Council, under the auspices of the Air Force Studies Board, formed the Committee on Energy Reduction at U.S. Air Force Facilities Using Industrial Processes: A Workshop. The terms of reference called for a committee to plan and convene one 3 day public workshop to discuss: (1) what are the current industrial processes that are least efficient and most cost ineffective? (2) what are best practices in comparable facilities for comparable processes to achieve energy efficiency? (3) what are the potential applications for the best practices to be found in comparable facilities for comparable processes to achieve energy efficiency? (4) what are constraints and considerations that might limit applicability to Air Force facilities and processes over the next ten year implementation time frame? (5) what are the costs and paybacks from implementation of the best practices? (6) what will be a proposed resulting scheme of priorities for study and implementation of the identified best practices? (7) what does a holistic representation of energy and water consumption look like within operations and maintenance?
Download or read book Zero Sustainment Aircraft for the U S Air Force written by National Research Council and published by National Academies Press. This book was released on 2013-03-12 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overall Air Force weapon system sustainment (WSS) costs are growing at more than 4 percent per year, while budgets have remained essentially flat. The cost growth is due partly to aging of the aircraft fleet, and partly to the cost of supporting higher-performance aircraft and new capabilities provided by more complex and sophisticated systems, such as the latest intelligence, surveillance, and reconnaissance (ISR) platforms. Furthermore, the expectation for the foreseeable future is that sustainment budgets are likely to decrease, so that the gap between budgets and sustainment needs will likely continue to grow wider. Most observers accept that the Air Force will have to adopt new approaches to WSS if it is going to address this problem and remain capable of carrying out its missions. In this context, the original intent of this 3-day workshop was to focus on ways that science and technology (S&T) could help the Air Force reduce sustainment costs. However, as the workshop evolved, the discussions focused more and more on Air Force leadership, management authority, and culture as the more critical factors that need to change in order to solve sustainment problems. Many participants felt that while S&T investments could certainly help-particularly if applied in the early stages ("to the left") of the product life cycle-adopting a transformational management approach that defines the user-driven goals of the enterprise, empowers people to achieve them, and holds them accountable, down to the shop level. Several workshop participants urged Air Force leaders to start the process now, even though it will take years to percolate down through the entire organization. These sustainment concerns are not new and have been studied extensively, including recent reports from the National Research Council's Air Force Studies Board and the Air Force Scientific Advisory Board.
Download or read book Air Force Energy Plan written by and published by . This book was released on 1986 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1992-10 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainability Engineering for Enhanced Process Design and Manufacturing Profitability written by Jeffery P. Perl and published by Springer Nature. This book was released on 2024 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in an expanded and revised second edition, this book explores sustainability engineering through the lens of the manufacturing and chemical process industries to explain the safe and economical implementation of process designs to transform raw materials into valuable finished products. The author applies the principles of sustainability science to engineering methodology for residential, commercial, and industrial applications that support the perpetual availability of raw materials through recycling, reuse, and repurposing to incorporate inexhaustible supplies and encompasses the management and conservation of these resources in a manner that minimizes negative environmental impacts. New sections include: Coverage of electric power opportunities and challenges (solar, wind, and cogeneration); Efficiency improvement as an energy supply extender; Recycling as a material extender. The book examines relevant energy policies driving and affecting commercial, industrial, and residential energy utilization and includes new industrial case studies. Anyone involved in the design or manufacture of chemicals or the upgrade of existing manufacturing processes will benefit from this books suggestions for identifying improvement options while adding the pivotal aspect of sustainability to the usual cost and safety equation optimization elements. A practical, systematic approach introducing holistic process designs emphasizing sustainability as a core requirement; How to combine chemical, mechanical, and natural processes to optimize material and energy utilization sustainably; Suitable for preparing young chemical engineers in the capstone course of senior process design. .
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1983 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Conservation in the Process Industries written by W. F. Kenney and published by Academic Press. This book was released on 2012-12-02 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Conservation in the Process Industries provides insight into ways of identifying more important energy efficiency improvements. This book demonstrates how the principles can be employed to practical advantage. Organized into 12 chapters, this book begins with an overview of the energy situation and a background in thermodynamics. This text then describes a staged method to improved energy use to understand where the energy goes and how to calculate the value of losses. Other chapters consider improving facilities based on an understanding of the overall site energy system. This book discusses as well the fundamental process and equipment improvements. The final chapter deals with systematic and sophisticated design methods as well as provides some guidelines and checklists for energy conservation items. This book is a valuable resource for mechanical, lead process, and plant engineers involved in energy conservation. Process designers, plant managers, process researchers, and accountants will also find this book extremely useful.
Download or read book Defense Viewpoint written by and published by . This book was released on 1991 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Bureau of Standards 1977 Catalog written by United States. National Bureau of Standards and published by . This book was released on 1978 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to industrial assessments for pollution prevention and energy efficiency written by and published by DIANE Publishing. This book was released on with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Directory of Federal Laboratory and Technology Resources written by and published by DIANE Publishing. This book was released on 1994 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the individual capabilities of each of 1,900 unique resources in the federal laboratory system, and provides the name and phone number of each contact. Includes government laboratories, research centers, testing facilities, and special technology information centers. Also includes a list of all federal laboratory technology transfer offices. Organized into 72 subject areas. Detailed indices.
Download or read book Wastewater Treatment written by David H.F. Liu and published by CRC Press. This book was released on 2020-08-18 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an exhaustive compilation of current knowledge, Wastewater Treatment covers subjects that run the gamut from wastewater sources, characteristics, and monitoring to chemical treatments and nutrient removal. Thoroughly examining basic and advanced topics, this resource has it all. The wealth of easy-to-use tables and illustrations provides quick and clear references, making it indispensable. Schematic drawings of equipment and devices explain the technology and techniques. With the level of detail included, you can count on finding both introductory material and very technical answers to complex questions. It's seamless style clearly delineates what can and must be done to continue to improve the quality of our water. Wastewater Treatment is a valuable resource; appropriate for engineers and students but readable enough for anyone interested in the discipline. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.
Download or read book Federal Register written by and published by . This book was released on 1995-11-28 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1980 with total page 1280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
