Download or read book Energy Harvesting for Wireless Sensing and Flexible Electronics Through Hybrid Technologies written by Brahim Aïssa and published by Materials, Circuits and Device. This book was released on 2023-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Harvesting biomechanical energy is a viable solution for sustainably-powering wearable electronics for continuous medical health monitoring, remote sensing, and motion tracking. This book discusses vibration-based piezoelectric, electromagnetic and hybrid energy harvesters, and addresses their modelling, fabrication and characterization.
Download or read book Energy Harvesting for Wireless Sensor Networks written by Olfa Kanoun and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-11-19 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless sensors and sensor networks (WSNs) are nowadays becoming increasingly important due to their decisive advantages. Different trends towards the Internet of Things (IoT), Industry 4.0 and 5G Networks address massive sensing and admit to have wireless sensors delivering measurement data directly to the Web in a reliable and easy manner. These sensors can only be supported, if sufficient energy efficiency and flexible solutions are developed for energy-aware wireless sensor nodes. In the last years, different possibilities for energy harvesting have been investigated showing a high level of maturity. This book gives therefore an overview on fundamentals and techniques for energy harvesting and energy transfer from different points of view. Different techniques and methods for energy transfer, management and energy saving on network level are reported together with selected interesting applications. The book is interesting for researchers, developers and students in the field of sensors, wireless sensors, WSNs, IoT and manifold application fields using related technologies. The book is organized in four major parts. The first part of the book introduces essential fundamentals and methods, while the second part focusses on vibration converters and hybridization. The third part is dedicated to wireless energy transfer, including both RF and inductive energy transfer. Finally, the fourth part of the book treats energy saving and management strategies. The main contents are: Essential fundamentals and methods of wireless sensors Energy harvesting from vibration Hybrid vibration energy converters Electromagnetic transducers Piezoelectric transducers Magneto-electric transducers Non-linear broadband converters Energy transfer via magnetic fields RF energy transfer Energy saving techniques Energy management strategies Energy management on network level Applications in agriculture Applications in structural health monitoring Application in power grids Prof. Dr. Olfa Kanoun is professor for measurement and sensor technology at Chemnitz university of technology. She is specialist in the field of sensors and sensor systems design.
Download or read book Energy Harvesting written by Apostolos Georgiadis and published by Cambridge University Press. This book was released on 2021-01-21 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough treatment of energy harvesting technologies, highlighting radio frequency (RF) and hybrid-multiple technology harvesting. The authors explain the principles of solar, thermal, kinetic, and electromagnetic energy harvesting, address design challenges, and describe applications. The volume features an introduction to switched mode power converters and energy storage and summarizes the challenges of different system implementations, from wireless transceivers to backscatter communication systems and ambient backscattering. This practical resource is essential for researchers and graduate students in the field of communications and sensor technology, in addition to practitioners working in these fields.
Download or read book Flexible Piezoelectric Energy Harvesters and Sensors written by Bin Yang and published by John Wiley & Sons. This book was released on 2022-09-19 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible Piezoelectric Energy Harvesters and Sensors A systematic and complete discussion of the latest progress in flexible piezoelectric energy harvesting and sensing technologies In Flexible Piezoelectric Energy Harvesters and Sensors, a team of distinguished researchers delivers a comprehensive exploration of the design methods, working mechanisms, microfabrication processes, and applications of flexible energy harvesters for wearable and implantable devices. The book discusses the monitoring of normal force, shear force, strain, and displacement in flexible sensors, as well as relevant artificial intelligence algorithms. Readers will also find an overview of design and research challenges facing professionals in the field, as well as a variety of perspectives on flexible energy harvesters and sensors. With an extensive focus on the use of flexible piezoelectric material technologies for medical applications, Flexible Piezoelectric Energy Harvesters and Sensors also includes: A thorough introduction to the working principles of piezoelectric devices, including discussions of flexible PEH and piezoelectric sensors Comprehensive treatments of the design of flexible piezoelectric energy harvesters, including the challenges associated with their structural design Fulsome explanations of the fabrication of flexible piezoelectric energy harvesters, including piezoelectric ceramic thin and think films In-depth treatments of cantilever piezoelectric energy harvesters, including optimized cantilever, bimorph, and optimized bimorph PEH Perfect for materials scientists, electronics engineers, and solid-state physicists, Flexible Piezoelectric Energy Harvesters and Sensors will also earn a place in the libraries of sensor developers, and surface physicists.
Download or read book Powering Autonomous Sensors written by María Teresa Penella-López and published by Springer Science & Business Media. This book was released on 2011-05-18 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous sensors transmit data and power their electronics without using cables. They can be found in e.g. wireless sensor networks (WSNs) or remote acquisition systems. Although primary batteries provide a simple design for powering autonomous sensors, they present several limitations such as limited capacity and power density, and difficulty in predicting their condition and state of charge. An alternative is to extract energy from the ambient (energy harvesting). However, the reduced dimensions of most autonomous sensors lead to a low level of available power from the energy transducer. Thus, efficient methods and circuits to manage and gather the energy are a must. An integral approach for powering autonomous sensors by considering both primary batteries and energy harvesters is presented. Two rather different forms of energy harvesting are also dealt with: optical (or solar) and radiofrequency (RF). Optical energy provides high energy density, especially outdoors, whereas RF remote powering is possibly the most feasible option for autonomous sensors embedded into the soil or within structures. Throughout different chapters, devices such as primary and secondary batteries, supercapacitors, and energy transducers are extensively reviewed. Then, circuits and methods found in the literature used to efficiently extract and gather the energy are presented. Finally, new proposals based on the authors’ own research are analyzed and tested. Every chapter is written to be rather independent, with each incorporating the relevant literature references. Powering Autonomous Sensors is intended for a wide audience working on or interested in the powering of autonomous sensors. Researchers and engineers can find a broad introduction to basic topics in this interesting and emerging area as well as further insights on the topics of solar and RF harvesting and of circuits and methods to maximize the power extracted from energy transducers.
Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.
Download or read book Energy Harvesting Autonomous Sensor Systems written by Yen Kheng Tan and published by CRC Press. This book was released on 2017-12-19 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Harvesting Autonomous Sensor Systems: Design, Analysis, and Practical Implementation provides a wide range of coverage of various energy harvesting techniques to enable the development of a truly self-autonomous and sustainable energy harvesting wireless sensor network (EH-WSN). It supplies a practical overview of the entire EH-WSN system from energy source all the way to energy usage by wireless sensor nodes/network. After an in-depth review of existing energy harvesting research thus far, the book focuses on: Outlines two wind energy harvesting (WEH) approaches, one using a wind turbine generator and one a piezoelectric wind energy harvester Covers thermal energy harvesting (TEH) from ambient heat sources with low temperature differences Presents two types of piezoelectric-based vibration energy harvesting systems to harvest impact or impulse forces from a human pressing a button or switch action Examines hybrid energy harvesting approaches that augment the reliability of the wireless sensor node’s operation Discusses a hybrid wind and solar energy harvesting scheme to simultaneously use both energy sources and therefore extend the lifetime of the wireless sensor node Explores a hybrid of indoor ambient light and TEH scheme that uses only one power management circuit to condition the combined output power harvested from both energy sources Although the author focuses on small-scale energy harvesting, the systems discussed can be upsized to large-scale renewable energy harvesting systems. The book goes beyond theory to explore practical applications that not only solve real-life energy issues but pave the way for future work in this area.
Download or read book Energy Harvesting in Wireless Sensor Networks and Internet of Things written by Faisal Karim Shaikh and published by IET. This book was released on 2021-12-09 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy efficiency paradigm is a major bottleneck for the development of wireless sensor networks (WSNs) and Internet of Things (IoT) architectures and technologies. This edited book presents comprehensive coverage of energy harvesting sources and techniques that can be used for WSN and IoT systems.
Download or read book Rechargeable Sensor Networks Technology Theory And Application Introducing Energy Harvesting To Sensor Networks written by Jiming Chen and published by World Scientific. This book was released on 2014-01-28 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The harvesting of energy from ambient energy sources to power electronic devices has been recognized as a promising solution to the issue of powering the ever-growing number of mobile devices around us.Key technologies in the rapidly growing field of energy harvesting focus on developing solutions to capture ambient energy surrounding the mobile devices and convert it into usable electrical energy for the purpose of recharging said devices. Achieving a sustainable network lifetime via battery-aware designs brings forth a new frontier for energy optimization techniques. These techniques had, in their early stages, resulted in the development of low-power hardware designs. Today, they have evolved into power-aware designs and even battery-aware designs.This book covers recent results in the field of rechargeable sensor networks, including technologies and protocol designs to enable harvesting energy from alternative energy sources such as vibrations, temperature variations, wind, solar, and biochemical energy and passive human power.
Download or read book Energy Harvesting for Wireless Sensor Networks written by Olfa Kanoun and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-11-19 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless sensors and sensor networks (WSNs) are nowadays becoming increasingly important due to their decisive advantages. Different trends towards the Internet of Things (IoT), Industry 4.0 and 5G Networks address massive sensing and admit to have wireless sensors delivering measurement data directly to the Web in a reliable and easy manner. These sensors can only be supported, if sufficient energy efficiency and flexible solutions are developed for energy-aware wireless sensor nodes. In the last years, different possibilities for energy harvesting have been investigated showing a high level of maturity. This book gives therefore an overview on fundamentals and techniques for energy harvesting and energy transfer from different points of view. Different techniques and methods for energy transfer, management and energy saving on network level are reported together with selected interesting applications. The book is interesting for researchers, developers and students in the field of sensors, wireless sensors, WSNs, IoT and manifold application fields using related technologies. The book is organized in four major parts. The first part of the book introduces essential fundamentals and methods, while the second part focusses on vibration converters and hybridization. The third part is dedicated to wireless energy transfer, including both RF and inductive energy transfer. Finally, the fourth part of the book treats energy saving and management strategies. The main contents are: Essential fundamentals and methods of wireless sensors Energy harvesting from vibration Hybrid vibration energy converters Electromagnetic transducers Piezoelectric transducers Magneto-electric transducers Non-linear broadband converters Energy transfer via magnetic fields RF energy transfer Energy saving techniques Energy management strategies Energy management on network level Applications in agriculture Applications in structural health monitoring Application in power grids Prof. Dr. Olfa Kanoun is professor for measurement and sensor technology at Chemnitz university of technology. She is specialist in the field of sensors and sensor systems design.
Download or read book Flexible Sensors for Energy Harvesting Applications written by Anindya Nag and published by Springer Nature. This book was released on 2022-04-21 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the fabrication of different types of flexible sensors and their subsequent implementation for energy-harvesting applications. A range of techniques, including 3D printing, soft lithography, laser ablation, micro-contract printing, screen-printing, inkjet printing and others have been used to form the flexible sensors with varied characteristics. These sensors have been used for biomedical, environmental and healthcare applications on the basis of their performances. The quality of these flexible sensors has depended on certain types of nanomaterials that have been used to synthesize the conductive parts of the prototypes. These nanomaterials have been based on different sizes and shapes, whose quality varied on the basis of certain factors like crystallinity, shapes and sizes. One of the primary utilization of these nanotechnology-based flexible sensors has been the harvesting of energy where nano-generators and nano-harvesters have been formed to generate and store energy, respectively, on small and moderate magnitudes. Mechanical and thermal energies have been harvested on the basis of the piezoelectric, pyroelectric and triboelectric effects created by the formed prototypes. The work highlights the amalgamation of these sectors to spotlight the essence of these types of sensors and their intended application.
Download or read book Flexible and Stretchable Triboelectric Nanogenerator Devices written by Mengdi Han and published by John Wiley & Sons. This book was released on 2019-08-07 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book starts with the fundamentals of triboelectric nanogenerators (TENGs), and continues through to fabrication technologies to achieve flexible and stretchable. Then self-powered flexible microsystems are introduced and application examples are presented, including TENG-based active sensors, TENG-powered actuators, artificial intelligence and integrated systems.
Download or read book Smart Sensor Systems written by Gerard Meijer and published by John Wiley & Sons. This book was released on 2014-04-02 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from an internationally-renowned group of experts, this book uses a multidisciplinary approach to review recent developments in the field of smart sensor systems, covering important system and design aspects. It examines topics over the whole range of sensor technology from the theory and constraints of basic elements, physics and electronics, up to the level of application-orientated issues. Developed as a complementary volume to ‘Smart Sensor Systems’ (Wiley 2008), which introduces the basics of smart sensor systems, this volume focuses on emerging sensing technologies and applications, including: State-of-the-art techniques for designing smart sensors and smart sensor systems, including measurement techniques at system level, such as dynamic error correction, calibration, self-calibration and trimming. Circuit design for sensor systems, such as the design of precision instrumentation amplifiers. Impedance sensors, and the associated measurement techniques and electronics, that measure electrical characteristics to derive physical and biomedical parameters, such as blood viscosity or growth of micro-organisms. Complete sensor systems-on-a-chip, such as CMOS optical imagers and microarrays for DNA detection, and the associated circuit and micro-fabrication techniques. Vibratory gyroscopes and the associated electronics, employing mechanical and electrical signal amplification to enable low-power angular-rate sensing. Implantable smart sensors for neural interfacing in bio-medical applications. Smart combinations of energy harvesters and energy-storage devices for autonomous wireless sensors. Smart Sensor Systems: Emerging Technologies and Applications will greatly benefit final-year undergraduate and postgraduate students in the areas of electrical, mechanical and chemical engineering, and physics. Professional engineers and researchers in the microelectronics industry, including microsystem developers, will also find this a thorough and useful volume.
Download or read book Energy Scavenging for Wireless Sensor Networks written by Shad Roundy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast reduction in size and power consumption of CMOS circuitry has led to a large research effort based around the vision of wireless sensor networks. The proposed networks will be comprised of thousands of small wireless nodes that operate in a multi-hop fashion, replacing long transmission distances with many low power, low cost wireless devices. The result will be the creation of an intelligent environment responding to its inhabitants and ambient conditions. Wireless devices currently being designed and built for use in such environments typically run on batteries. However, as the networks increase in number and the devices decrease in size, the replacement of depleted batteries will not be practical. The cost of replacing batteries in a few devices that make up a small network about once per year is modest. However, the cost of replacing thousands of devices in a single building annually, some of which are in areas difficult to access, is simply not practical. Another approach would be to use a battery that is large enough to last the entire lifetime of the wireless sensor device. However, a battery large enough to last the lifetime of the device would dominate the overall system size and cost, and thus is not very attractive. Alternative methods of powering the devices that will make up the wireless networks are desperately needed.
Download or read book International Conference on Intelligent Computing and Smart Communication 2019 written by Geetam Singh Tomar and published by Springer Nature. This book was released on 2020-01-07 with total page 1635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers high-quality research papers presented at the First International Conference, ICSC 2019, organised by THDC Institute of Hydropower Engineering and Technology, Tehri, India, from 20 to 21 April 2019. The book is divided into two major sections – Intelligent Computing and Smart Communication. Some of the areas covered are Parallel and Distributed Systems, Web Services, Databases and Data Mining Applications, Feature Selection and Feature Extraction, High-Performance Data Mining Algorithms, Knowledge Discovery, Communication Protocols and Architectures, High-speed Communication, High-Voltage Insulation Technologies, Fault Detection and Protection, Power System Analysis, Embedded Systems, Architectures, Electronics in Renewable Energy, CAD for VLSI, Green Electronics, Signal and Image Processing, Pattern Recognition and Analysis, Multi-Resolution Analysis and Wavelets, 3D and Stereo Imaging, and Neural Networks.
Download or read book Advanced Sensor Technology written by Ahmed Barhoum and published by Elsevier. This book was released on 2022-11-16 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Sensor Technology: Biomedical, Environmental, and Construction Applications introduces readers to the past, present and future of sensor technology and its emerging applications in a wide variety of different fields. Organized in five parts, the book covers historical context and future outlook of sensor technology development and emerging applications, the use of sensors throughout many applications in healthcare, health and life science research, public health and safety, discusses chemical sensors used in environmental monitoring and remediation of contaminants, highlights the use of sensors in food, agriculture, fire prevention, automotive and robotics, and more. Final sections look forward at the challenges that must be overcome in the development and use of sensing technology as well as their commercial use, making this book appropriate for the interdisciplinary community of researchers and practitioners interested in the development of sensor technologies. - Covers a range of environmental applications such as protection and improvement of water, air, soil, plants, and agriculture and food production; biomedical applications including detection of viruses, genes, hormones, proteins, bacteria, and cancer, and applications in construction such as fire protection, automotive, robotics, food packing and micro-machining - Provides an outlook on opportunities and challenges for the fabrication and manufacturing of sensors in industry and their applicability for industrial uses - Demonstrates how cutting-edge developments in sensing technology translate into real-world innovations in a range of industry sectors
Download or read book ICCAP 2021 written by A Mohan and published by European Alliance for Innovation. This book was released on 2021-12-22 with total page 2763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceeding constitutes the thoroughly refereed proceedings of the 1st International Conference on Combinatorial and Optimization, ICCAP 2021, December 7-8, 2021. This event was organized by the group of Professors in Chennai. The Conference aims to provide the opportunities for informal conversations, have proven to be of great interest to other scientists and analysts employing these mathematical sciences in their professional work in business, industry, and government. The Conference continues to promote better understanding of the roles of modern applied mathematics, combinatorics, and computer science to acquaint the investigator in each of these areas with the various techniques and algorithms which are available to assist in his or her research. We selected 257 papers were carefully reviewed and selected from 741 submissions. The presentations covered multiple research fields like Computer Science, Artificial Intelligence, internet technology, smart health care etc., brought the discussion on how to shape optimization methods around human and social needs.
