Download or read book Energy Efficiency Improvement and Cost Saving Opportunities for Cement Making An ENERGY STAR R Guide for Energy and Plant Managers written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The cost of energy as part of the total production costs in the cement industry is significant, warranting attention for energy efficiency to improve the bottom line. Historically, energy intensity has declined, although more recently energy intensity seems to have stabilized with the gains. Coal and coke are currently the primary fuels for the sector, supplanting the dominance of natural gas in the 1970s. Most recently, there is a slight increase in the use of waste fuels, including tires. Between 1970 and 1999, primary physical energy intensity for cement production dropped 1 percent/year from 7.3 MBtu/short ton to 5.3 MBtu/short ton. Carbon dioxide intensity due to fuel consumption and raw material calcination dropped 16 percent, from 609 lb. C/ton of cement (0.31 tC/tonne) to 510 lb. C/ton cement (0.26 tC/tonne). Despite the historic progress, there is ample room for energy efficiency improvement. The relatively high share of wet-process plants (25 percent of clinker production in 1999 in the U.S.) suggests the existence of a considerable potential, when compared to other industrialized countries. We examined over 40 energy efficient technologies and measures and estimated energy savings, carbon dioxide savings, investment costs, and operation and maintenance costs for each of the measures. The report describes the measures and experiences of cement plants around the world with these practices and technologies. Substantial potentials for energy efficiency improvement exist in the cement industry and in individual plants. A portion of this potential will be achieved as part of (natural) modernization and expansion of existing facilities, as well as construction of new plants in particular regions. Still, a relatively large potential for improved energy management practices exists.
Download or read book Energy Efficiency written by Daniel M. Martinez and published by Elsevier. This book was released on 2019-05-09 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Efficiency: Concepts and Calculations is the first book of its kind to provide an applied, systems oriented description of energy intensity and efficiency in modern economies across the entire energy chain. With an emphasis on analysis, specifically energy flow analysis, lifecycle energy accounting, economic analysis, technology evaluation, and policies/strategies for adopting high energy efficiency standards, the book provides a comprehensive understanding of the concepts, tools and methodologies for studying and modeling macro-level energy flows through, and within, key economic sectors (electric power, industrial, commercial, residential and transportation). Providing a technical discussion of the application of common methodologies (e.g. cost-benefit analysis and lifecycle assessment), each chapter contains figures, charts and examples from each sector, including the policies that have been put in place to promote and incentivize the adoption of energy efficient technologies. Contains models and tools to analyze each stage at the macro-level by tracking energy consumption and how the resulting data might change energy use Includes accessible references and a glossary of common terms at the end of each chapter Provides diagnostic figures, tables and schematics within the context of local, regional and national energy consumption and utilization
Download or read book Energy Efficiency Improvement Opportunities for Cement Making written by Lawrence Berkeley Laboratory. Energy Analysis Department and published by . This book was released on 2008 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Real Prospects for Energy Efficiency in the United States written by National Research Council and published by National Academies Press. This book was released on 2010-06-10 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: America's economy and lifestyles have been shaped by the low prices and availability of energy. In the last decade, however, the prices of oil, natural gas, and coal have increased dramatically, leaving consumers and the industrial and service sectors looking for ways to reduce energy use. To achieve greater energy efficiency, we need technology, more informed consumers and producers, and investments in more energy-efficient industrial processes, businesses, residences, and transportation. As part of the America's Energy Future project, Real Prospects for Energy Efficiency in the United States examines the potential for reducing energy demand through improving efficiency by using existing technologies, technologies developed but not yet utilized widely, and prospective technologies. The book evaluates technologies based on their estimated times to initial commercial deployment, and provides an analysis of costs, barriers, and research needs. This quantitative characterization of technologies will guide policy makers toward planning the future of energy use in America. This book will also have much to offer to industry leaders, investors, environmentalists, and others looking for a practical diagnosis of energy efficiency possibilities.
Download or read book Energy Efficiency Improvement and Cost Saving Opportunities for the U S Iron and Steel Industry An ENERGY STAR R Guide for Energy and Plant Managers written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy is an important cost factor in the U.S iron and steel industry. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. iron and steel industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy-efficient technologies that can be implemented at the component, process, facility, and organizational levels. A discussion of the structure, production trends, energy consumption, and greenhouse gas emissions of the iron and steel industry is provided along with a description of the major process technologies used within the industry. Next, a wide variety of energy efficiency measures are described. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in the steel and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. The information in this Energy Guide is intended to help energy and plant managers in the U.S. iron and steel industry reduce energy consumption and greenhouse gas emissions in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures?and on their applicability to different production practices?is needed to assess their cost effectiveness at individual plants.
Download or read book Energy Efficiency Improvement and Cost Saving Opportunities for the Petrochemical Industry An ENERGY STAR R Guide for Energy and Plant Managers written by and published by . This book was released on 2008 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy is the most important cost factor in the U.S petrochemical industry, defined in this guide as the chemical industry sectors producing large volume basic and intermediate organic chemicals as well as large volume plastics. The sector spent about $10 billion on fuels and electricity in 2004. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. petrochemical industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy efficient technologies that can be implemented at the component, process, facility, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the petrochemical industry is provided along with a description of the major process technologies used within the industry. Next, a wide variety of energy efficiency measures are described. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in the petrochemical and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. The information in this Energy Guide is intended to help energy and plant managers in the U.S. petrochemical industry reduce energy consumption in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures--and on their applicability to different production practices--is needed to assess their cost effectiveness at individual plants.
Download or read book Introduction to Energy written by Edward S. Cassedy and published by Cambridge University Press. This book was released on 2017-07-06 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the potential disruption of climate change, understanding energy issues and technologies is more important than ever if societies are to make informed choices on policy. Now in its third edition, Introduction to Energy explores the crucial issues connected to modern energy technology and its uses. Fully updated to respond to the substantial developments in the energy sector, the book expands on the relationships of energy use and climate change; of energy availability and the alleviation of world poverty; and of energy consumption and the sustainability of the lifestyles of people in the industrialized world. Directed at a broad readership, it assumes no prior technical expertise and avoids complex mathematical formulations, continuing to provide a standard for introductory energy courses. It is also a useful supplementary text for programs in public policy, business law and resource economics.
Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.
Download or read book Green Savings written by Marilyn A. Brown and published by Bloomsbury Publishing USA. This book was released on 2015-09-29 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This landmark work lauds the benefits of decreased energy consumption, investigating its relationship to public policy and analyzing its potential billion-dollar benefits to the U.S. economy. U.S. consumers tend to use energy indiscriminately—something they may no longer be able to do with impunity. This game-changing book asserts that reducing energy consumption should be a frontline strategy to address global climate change, threats to energy security, and the challenge of grid reliability. The book supports two bold arguments: that policies motivating greater investment in high energy efficiency should be a priority, and that energy efficiency can help the nation in times of crisis. To make their case for the necessity of prioritizing demand reduction, the authors examine the policies and markets operating in a number of leading cities, states, and nations across the globe to uncover the keys to their success. These examples show how demand-side strategies can significantly reduce pollution, cut costs, and make the electric grid more resilient. The authors explain why these technologies are not widely adopted and assess the potential savings they can produce. The book will be an eye-opener for policymakers, energy professionals, and the public as it demonstrates how cost-effective demand reduction policies can improve air quality, strengthen electricity markets, and generate jobs.
Download or read book Green Building with Concrete written by Gajanan M. Sabnis and published by CRC Press. This book was released on 2015-06-16 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrates the Global Relevance of SustainabilityApplicable to roads, bridges, and other elements of the infrastructure, Green Building with Concrete: Sustainable Design and Construction, Second Edition provides an overview of all available information on the role of concrete in green building. A handbook offering viewpoints from worldwide experts
Download or read book Energy Efficiency Improvement and Cost Saving Oportunities for the Concrete Industry written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. concrete industry is the main consumer of U.S.-produced cement. The manufacturing of ready mixed concrete accounts for more than 75% of the U.S. concrete production following the manufacturing of precast concrete and masonry units. The most significant expenditure is the cost of materials accounting for more than 50% of total concrete production costs - cement only accounts for nearly 24%. In 2009, energy costs of the U.S. concrete industry were over $610 million. Hence, energy efficiency improvements along with efficient use of materials without negatively affecting product quality and yield, especially in times of increased fuel and material costs, can significantly reduce production costs and increase competitiveness. The Energy Guide starts with an overview of the U.S. concrete industry's structure and energy use, a description of the various manufacturing processes, and identification of the major energy consuming areas in the different industry segments. This is followed by a description of general and process related energy- and cost-efficiency measures applicable to the concrete industry. Specific energy and cost savings and a typical payback period are included based on literature and case studies, when available. The Energy Guide intends to provide information on cost reduction opportunities to energy and plant managers in the U.S. concrete industry. Every cost saving opportunity should be assessed carefully prior to implementation in individual plants, as the economics and the potential energy and material savings may differ.
Download or read book Enhancement of Industrial Energy Efficiency and Sustainability written by Andrea Trianni and published by MDPI. This book was released on 2021-02-26 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial energy efficiency has been recognized as a major contributor, in the broader set of industrial resources, to improved sustainability and circular economy. Nevertheless, the uptake of energy efficiency measures and practices is still quite low, due to the existence of several barriers. Research has broadly discussed them, together with their drivers. More recently, many researchers have highlighted the existence of several benefits, beyond mere energy savings, stemming from the adoption of such measures, for several stakeholders involved in the value chain of energy efficiency solutions. Nevertheless, a deep understanding of the relationships between the use of the energy resource and other resources in industry, together with the most important factors for the uptake of such measures—also in light of the implications on the industrial operations—is still lacking. However, such understanding could further stimulate the adoption of solutions for improved industrial energy efficiency and sustainability.
Download or read book Global Energy Assessment written by Thomas B. Johansson and published by Cambridge University Press. This book was released on 2012-08-27 with total page 1885 pages. Available in PDF, EPUB and Kindle. Book excerpt: Independent, scientifically based, integrated, policy-relevant analysis of current and emerging energy issues for specialists and policymakers in academia, industry, government.
Download or read book Handbook of Manufacturing Industries in the World Economy written by John R. Bryson and published by Edward Elgar Publishing. This book was released on 2015-04-30 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interdisciplinary volume provides a critical and multi-disciplinary review of current manufacturing processes, practices, and policies, and broadens our understanding of production and innovation in the world economy. Chapters highlight how firms
Download or read book The Decarbonization Imperative written by Michael Lenox and published by Stanford University Press. This book was released on 2021-10-19 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time is of the essence. Climate change looms as a malignant force that will reshape our economy and society for generations to come. If we are going to avoid the worst effects of climate change, we are going to need to effectively "decarbonize" the global economy by 2050. This doesn't mean a modest, or even a drastic, improvement in fuel efficiency standards for automobiles. It means 100 percent of the cars on the road being battery-powered or powered by some other non-carbon-emitting powertrain. It means 100 percent of our global electricity needs being met by renewables and other non-carbon-emitting sources such as nuclear power. It means electrifying the global industrials sector and replacing carbon-intensive chemical processes with green alternatives, eliminating scope-one emissions—emissions in production—across all industries, particularly steel, cement, petrochemicals, which are the backbone of the global economy. It means sustainable farming while still feeding a growing global population. Responding to the existential threat of climate change, Michael Lenox and Rebecca Duff propose a radical reconfiguration of the industries contributing the most, and most harmfully, to this planetary crisis. Disruptive innovation and a particular calibration of industry dynamics will be key to this change. The authors analyze precisely what this might look like for specific sectors of the world economy—ranging from agriculture to industrials and building, energy, and transportation—and examine the possible challenges and obstacles to introducing a paradigm shift in each one. With regards to existent business practices and products, how much and what kind of transformation can be achieved? The authors assert that markets are critical to achieving the needed change, and that they operate within a larger scale of institutional rules and norms. Lenox and Duff conclude with an analysis of policy interventions and strategies that could move us toward clean tech and decarbonization by 2050.
Download or read book Energy Efficiency Improvement and Cost Saving Opportunities for Breweries written by Lawrence Berkeley National Laboratory. Environmental Energy Technologies Division and published by . This book was released on 2003 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Energy Star Challenge written by and published by . This book was released on 2007 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
