Download or read book Energy Deposition and Damage Calculations in Core Vessel Inserts at the Spallation Neutron Source written by and published by . This book was released on 2002 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat-deposition and damage calculations are described for core-vessel inserts in the target area of the Spallation Neutron Source. Two separate designs for these inserts (or neutron beam tubes) were studied; a single-unit insert and a multi-unit insert. The single unit contains a neutron guide; the multi unit does not. Both units are constructed of stainless steel. For the single unit, separate studies were carried out with the guide composed of stainless steel, glass, and aluminum. Results are also reported for an aluminum window on the front of the insert, a layer of nickel on the guide, a cadmium shield surrounding the guide, and a stainless steel plug in the beam-tube opening. The locations of both inserts were the most forward positions to be occupied by each design respectively thus ensuring that the calculations are conservative.
Download or read book Spallation Radiation Damage Calculations and Database written by Monroe S. Wechsler and published by . This book was released on 2006 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: A radiation damage database at NCSU is described that contains, at present, cross sections for damage energy, displacements, helium, and hydrogen. For neutrons and protons at 20-3200 MeV energies, the targets include 23 target elements from Mg to U and eight practical alloys. The underlying calculations employ Bertini, ISABEL, and CEM2k intranuclear cascade models as provided within MCNPX, three level-density formulations (GCCI, HETC, and Jülich), and multistage pre-equilibrium model (MPM) on and off. The database also includes radiation damage cross sections for lower-energy neutrons and protons, as obtained from LA150, SPECTER, ENDF, and SRIM. Examples of the database contents are provided with regard to damage energy and displacement cross sections for neutrons on Al, Fe, and W. Also, neutron flux and displacement rate calculations are described for neutrons on Fe and the 316 stainless steel mercury container vessel at SNS. In addition, discrepancies between the codes are discussed.
Download or read book Status of Accelerator Driven Systems Research and Technology Development written by International Atomic Energy Agency and published by IAEA Tecdoc. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the greatest challenges for nuclear energy is how to properly manage the highly radioactive waste generated during irradiation in nuclear reactors. Accelerator Driven Systems (ADSs) may offer new prospects and advantages for the transmutation of such high level nuclear waste. ADS or accelerator driven transmutation of waste (ATW) consists of a high power proton accelerator, a heavy metal spallation target that produces neutrons when bombarded by the high power beam, and a sub-critical core that is neutronically coupled to the spallation target. This publication provides a comprehensive state of the art of the ADS technology by representing the different ADS concepts proposed worldwide in the last 15 years, as well as the related R&D activities and demonstration initiatives carried out at national international level.
Download or read book Radiological Characterization of Shut Down Nuclear Reactors for Decommissioning Purposes written by International Atomic Energy Agency and published by . This book was released on 1998 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes and assesses radiological characterization as a precursor to decommissioning. It shows the influence of the radioactive inventory on the planning and strategies of decommissioning and also presents an extensive overview of characterization results on various reactors which have been or are being decommissioned.
Download or read book 1997 17th IEEE NPSS Symposium on Fusion Engineering written by IEEE, Nuclear and Plasma Sciences Society Staff and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Research Reactors written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2014 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a comprehensive study that reviews the current situation in a great number of applications of research reactors. It revises the contents of IAEA TECDOC-1234, The Applications of Research Reactors, giving detailed updates on each field of research reactor uses worldwide. Reactors of all sizes and capabilities can benefit from the sharing of current practices and research enabled via this updated version, which describes the requirements for practicing methods as diverse as neutron activation analysis, education and training, neutron scattering and neutron imaging, silicon doping and radioisotope production, material/fuel irradiation and testing, and some others. Many underutilised research reactors can learn how to diversify their technical capabilities, staff and potential commercial partners and users seeking research reactor services and products. The content of the publication has also been strengthened in terms of current issues facing the vast majority of research reactors by including sections describing user and customer relations as well as strategic planning considerations.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1967 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Assessment of the Prospects for Inertial Fusion Energy written by National Research Council and published by National Academies Press. This book was released on 2013-07-05 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants, appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects, many nations have initiated research and development (R&D) programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy (MFE) and inertial fusion energy (IFE). An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion (ICF) in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant.
Download or read book Canada Enters the Nuclear Age written by Atomic Energy of Canada Limited and published by McGill-Queen's Press - MQUP. This book was released on 1997 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear energy company has overseen the production of its own history, focusing on programs at its laboratories in Chalk River, Ontario, and Whiteshell, Manitoba between 1943 and 1985. The 16 scientists who wrote the narrative discuss the organization and operations of the laboratories, nuclear safety and radiation protection, radioisotopes, basic research, developing the CANDU reactor, managing the radioactive wastes, business development, and revenue generation. Canadian card order number: C97-900188-9. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Radiological Safety Aspects of the Operation of Proton Accelerators lilustr written by Ralph H. Thomas and published by . This book was released on 1988 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bringing Fusion to the U S Grid written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-11-17 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion energy offers the prospect of addressing the nation's energy needs and contributing to the transition to a low-carbon emission electrical generation infrastructure. Technology and research results from U.S. investments in the major fusion burning plasma experiment known as ITER, coupled with a strong foundation of research funded by the Department of Energy (DOE), position the United States to begin planning for its first fusion pilot plant. Strong interest from the private sector is an additional motivating factor, as the process of decarbonizing and modernizing the nation's electric infrastructure accelerates and companies seek to lead the way. At the request of DOE, Bringing Fusion to the U.S. Grid builds upon the work of the 2019 report Final Report of the Committee on a Strategic Plan for U.S. Burning Plasma Research to identify the key goals and innovations - independent of confinement concept - that are needed to support the development of a U.S. fusion pilot plant that can serve as a model for producing electricity at the lowest possible capital cost.
Download or read book Challenges for Coolants in Fast Neutron Spectrum Systems written by International Atomic Energy Agency and published by . This book was released on 2020-07-30 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication evaluates the different coolant options considered for nuclear applications with a fast neutron spectrum (i.e. fusion, fission and accelerators), compiles the latest information in the field and identifies research needs.
