Download or read book Energy Conserve in Industry Combustion Heat Recovery and Rankine Cycle Machines written by H. Ehringer and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objectives of the Ccmnunity's energy policy consist of securing a sufficient energy supply for the present and future demand of its Member States and in reducing the Community's dependence on imported energy through the more rational use of energy and a broader diversifi cation of supply. This requires a full set of common efforts at all levels, including energy research and development. In the framework of its strategy for scientific and technological research the Commission of the European Ccmnunities has launched several R & D progranunes in the field of energy. Theses progranunes are :inplemented either directly in its Joint Research Centre or by concluding contracts with research institutions in the EC Member countries. One of the most inportant short and medil.UR term objectives of the present four-year Energy R & D Progranune (1979 - 1983) approved by the Council of Ministers on 13 September 1979 aims at fostering energy conservation technologies in the three main energy consl.Uning sectors: danestic, industry and transport. In the European Carmunity more than 35% of the energy is conslB'IIed in industry. About 23% of the inported oil is used in this sector. Two thirds of this energy are used for heating purposes. Consequently, there is a high potential for residuary heat recovery. In order to enhance rational use of energy and energy conservation in the Member States of the Ccmnunity, it is necessary, anong other things, to promote the development of combustion and energy recovery techniques.
Download or read book Energy Conservation in Industry Combustion Heat Recovery and Rankine Cycle Machines written by Energy R&D Programme of the Commission of the European Communities and published by . This book was released on 1982 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Conserve in Industry Combustion Heat Recovery and Rankine Cycle Machines written by H. Ehringer and published by Springer. This book was released on 1983-04-30 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objectives of the Ccmnunity's energy policy consist of securing a sufficient energy supply for the present and future demand of its Member States and in reducing the Community's dependence on imported energy through the more rational use of energy and a broader diversifi cation of supply. This requires a full set of common efforts at all levels, including energy research and development. In the framework of its strategy for scientific and technological research the Commission of the European Ccmnunities has launched several R & D progranunes in the field of energy. Theses progranunes are :inplemented either directly in its Joint Research Centre or by concluding contracts with research institutions in the EC Member countries. One of the most inportant short and medil.UR term objectives of the present four-year Energy R & D Progranune (1979 - 1983) approved by the Council of Ministers on 13 September 1979 aims at fostering energy conservation technologies in the three main energy consl.Uning sectors: danestic, industry and transport. In the European Carmunity more than 35% of the energy is conslB'IIed in industry. About 23% of the inported oil is used in this sector. Two thirds of this energy are used for heating purposes. Consequently, there is a high potential for residuary heat recovery. In order to enhance rational use of energy and energy conservation in the Member States of the Ccmnunity, it is necessary, anong other things, to promote the development of combustion and energy recovery techniques.
Download or read book Energy Conservation in Industry written by and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy conservation in industry written by Albert S. Strub and published by . This book was released on 1984 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Conservation in Industry written by Hermann Ehringer and published by . This book was released on 1983 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organic Rankine Cycle Technology for Heat Recovery written by Enhua Wang and published by BoD – Books on Demand. This book was released on 2018-11-07 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on organic Rankine cycle technology presents nine chapters on research activities covering the wide range of current issues on the organic Rankine cycle. The first section deals with working fluid selection and component design. The second section is related to dynamic modeling, starting from internal combustion engines to industrial power plants. The third section discusses industrial applications of waste heat recovery, including internal combustion engines, LNG, and waste water. A comprehensive analysis of the technology and application of organic Rankine cycle systems is beyond the aim of the book. However, the content of this volume can be useful for scientists and students to broaden their knowledge of technologies and applications of organic Rankine cycle systems.
Download or read book Organic Rankine Cycle ORC Power Systems written by Ennio Macchi and published by Woodhead Publishing. This book was released on 2016-08-24 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Rankine Cycle (ORC) Power Systems: Technologies and Applications provides a systematic and detailed description of organic Rankine cycle technologies and the way they are increasingly of interest for cost-effective sustainable energy generation. Popular applications include cogeneration from biomass and electricity generation from geothermal reservoirs and concentrating solar power installations, as well as waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes. With hundreds of ORC power systems already in operation and the market growing at a fast pace, this is an active and engaging area of scientific research and technical development. The book is structured in three main parts: (i) Introduction to ORC Power Systems, Design and Optimization, (ii) ORC Plant Components, and (iii) Fields of Application. - Provides a thorough introduction to ORC power systems - Contains detailed chapters on ORC plant components - Includes a section focusing on ORC design and optimization - Reviews key applications of ORC technologies, including cogeneration from biomass, electricity generation from geothermal reservoirs and concentrating solar power installations, waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes - Various chapters are authored by well-known specialists from Academia and ORC manufacturers
Download or read book Energy Efficiency in Industry written by J. Sirchis and published by CRC Press. This book was released on 2003-09-02 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a workshop organized by the Commission of the European Communities, Directorate-General for Energy, Berlin, Germany, 19-20 October 1987.
Download or read book Industrial Energy Conservation written by David Anthony Reay and published by Pergamon. This book was released on 1979 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1985 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Efficiency in Process Technology written by P.A. Pilavachi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1975 the Commission has been stimulating R & D work aimed at energy saving. The conference objective was to provide an international forum for the presentation and discussion of recent R & D relevant to energy efficiency, taking into account environmental aspects, in the energy intensive process industries.
Download or read book Closed Power Cycles written by Costante Mario Invernizzi and published by Springer Science & Business Media. This book was released on 2013-06-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the growing attention to the exploitation of renewable energies and heat recovery from industrial processes, the traditional steam and gas cycles are showing themselves often inadequate. The inadequacy is due to the great assortment of the required sizes power and of the large kind of heat sources. Closed Power Cycles: Thermodynamic Fundamentals and Applications offers an organized discussion about the strong interaction between working fluids, the thermodynamic behavior of the cycle using them and the technological design aspects of the machines. A precise treatment of thermal engines operating in accordance with closed cycles is provided to develop ideas and discussions strictly founded on the basic thermodynamic facts that control the closed cycles operation and design. Closed Power Cycles: Thermodynamic Fundamentals and Applications also contains numerous examples which have been carried out with the help of the Aspen Plus®R program. Including chapters on binary cycles, the organic Rankine cycle and real closed gas cycles, Closed Power Cycles: Thermodynamic Fundamentals and Applications acts a solid introduction and reference for post-graduate students and researchers working in applied thermodynamics and energy conversion with thermodynamic engines.
Download or read book Energy Conservation in the Process Industries written by W. F. Kenney and published by Academic Press. This book was released on 2012-12-02 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Conservation in the Process Industries provides insight into ways of identifying more important energy efficiency improvements. This book demonstrates how the principles can be employed to practical advantage. Organized into 12 chapters, this book begins with an overview of the energy situation and a background in thermodynamics. This text then describes a staged method to improved energy use to understand where the energy goes and how to calculate the value of losses. Other chapters consider improving facilities based on an understanding of the overall site energy system. This book discusses as well the fundamental process and equipment improvements. The final chapter deals with systematic and sophisticated design methods as well as provides some guidelines and checklists for energy conservation items. This book is a valuable resource for mechanical, lead process, and plant engineers involved in energy conservation. Process designers, plant managers, process researchers, and accountants will also find this book extremely useful.
Download or read book New Ways to Save Energy written by A.S. Strub and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Seminar organized by the Commission of the European Communities, held in Brussels, 21-25 October 1979
Download or read book Solar Energy Update written by and published by . This book was released on 1984 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organic Rankine Cycles for Waste Heat Recovery written by Silvia Lasala and published by BoD – Books on Demand. This book was released on 2020-05-13 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises five chapters on developed research activities on organic Rankine cycles. The first section aims to provide researchers with proper modelling (Chapter 1) and experimental (Chapter 2) tools to calculate and empirically validate thermophysical properties of ORC working fluids. The second section introduces some theoretical and experimental studies of organic Rankine cycles for waste heat recovery applications: a review of different supercritical ORC (Chapter 3), ORC for waste heat recovery from fossil-fired power plants (Chapter 4), the experimental detailed characterization of a small-scale ORC of 3 kW operating with either pure fluids or mixtures (Chapter 5).
