Download or read book Introduction to High Temperature Superconductivity written by Thomas Sheahen and published by Springer Science & Business Media. This book was released on 2006-02-24 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing from physics, mechanical engineering, electrical engineering, ceramics, and metallurgy, high-temperature superconductivity (HTSC) spans nearly the entire realm of materials science. This volume presents each of those disciplines at an introductory level, such that readers will ultimately be able to read the literature in the field.
Download or read book Advances in Cryogenic Engineering written by Peter Kittel and published by Springer Science & Business Media. This book was released on 1998-09-30 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Oregon Convention Center, Portland, Oregon, was the venue for the 1997 Cryogenic Engineering Conference. The meeting was held jointly with the International Cryogenic Materials Conference. John Barclay, of the University of Victoria, and David Smathers, of Cabot Performance Materials, were conference chairmen. Portland is the home of Northwest Natural Gas, a pioneer in the use of liquid natural gas, and Portland State University, where cryogenic research has long been conducted. The program consisted of 350 CEC papers, considerable more than CEC-95. This was the largest number of papers ever submitted to the CEC. Of these, 263 papers are published here, in Volume 43 of Advances in Cryogenic Engineering. Once again the volume is published in two books. CEC PAPER REVIEW PROCESS Since 1954 Advances in Cryogenic Engineering has been the archival publication of papers presented at the biennial CEC!ICMC conferences. The publication includes invited, unsolicited, and government sponsored research papers in the research areas of cryogenic engineering and applications. All of the papers published must (1) be presented at the conference, (2) pass the peer review process, and (3) report previously unpublished theoretical studies, reviews, or advances in cryogenic engineering.
Download or read book High Tc Update written by and published by . This book was released on 1992 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Superconductors Materials Properties and Applications written by Rainer Wesche and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discovery by J. G. Bednorz and K. A. Mtllier in 1986 that the superconducting state can exist in oxides at temperatures above 30 K stimulated research in the field of superconductivity and opened up a new field of research. Within a few years a large number of cuprate superconductors with transition temperatures well above the boiling point of liquid nitrogen have been found. The possibility of using liquid nitrogen as coolant re-stimulated interest in power applications of supercon ductivity. In this book an overview of the known high-Te superconductors and their physical properties is presented. Aspects related to conductor fabrication and high-current applications are emphasised. The material should be suitable for use in graduate level courses on superconductivity. Researchers in the field may profit from the large number of tables and references describing its status at the end of 1997. An introduction to high-To superconductivity must be based on the fundamental physical principles of normal-state electrical conductivity and the well-known characteristics of conventional superconductors. In Chapter 2 this background is provided. Crystal structures, anisotropic properties and general trends of the critical temperatures of the cuprate superconductors are described in Chapters 3 and 4. The processing of superconductor powders addressed in Chapter 5 affects considerably the current-carrying capacity of high-T. wires. In Chapter 6 several fabrication techniques for superconducting wires are described. In addition, the factors limiting the transport critical currents ofhigh-Te wires are discussed.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-06 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magill s Survey of Science written by Frank Northen Magill and published by . This book was released on 1993 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Superconductivity 2 written by Anant V. Narlikar and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Download or read book Ecologically Sound Integrated Regional Energy Planning written by T. V. Ramachandra and published by Nova Biomedical Books. This book was released on 2003 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to develop an Ecologically Sound Integrated Energy Plan at district level to arrive at an optimal mix of energy sources that can meet the energy demand in a region by keeping in view the development priorities of the region. The book presents a conceptual design for energy systems which could meet demand of all sectors in a region. The proposed design in principle, supplies enough energy for the sustainable development of a region. The plan proposed is based on the Decision Support System approach (DSS) and is flexible, adaptable and ecologically sound. Contents: Preface; Introduction; Potential Assessment of Wind Energy in Uttara Kannada District; Bioenergy Potential and Prospects; Hydro Energy Potential and Prospects; An Ecologically Friendly Optimal Design of Hydroelectric Projects; Solar Energy Potential and Prospects; Energy Consumption Patterns in the Domestic Sector; Energetics in Paddy Cultivation; Energy Utilisation in Industrial Sector; Integrated Regional Energy Planning; Summary.
Download or read book 100 Years of Superconductivity written by Horst Rogalla and published by Taylor & Francis. This book was released on 2011-11-11 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even a hundred years after its discovery, superconductivity continues to bring us new surprises, from superconducting magnets used in MRI to quantum detectors in electronics. 100 Years of Superconductivity presents a comprehensive collection of topics on nearly all the subdisciplines of superconductivity. Tracing the historical developments in supe
Download or read book High Temperature Superconductivity in Perspective written by and published by . This book was released on 1990 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1989 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High temperature superconductivity in perspective written by United States. Congress. Office of Technology Assessment and published by DIANE Publishing. This book was released on 1990 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Properties Of High Temperature Superconductors Ii written by Donald M Ginsberg and published by World Scientific. This book was released on 1990-02-01 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of Physical Properties of High Temperature Superconductors I, research in the field of high temperature superconductivity has continued at a rapid pace. Volume II will contain chapters on some of the major areas of activity which were not covered extensively in Volume I: structure, microstructure, thermodynamics, oxygen stoichiometry effects, nuclear magnetic and quadrupole resonance, Hall effect, electronic structure, and the pairing state. Like Volume I, it will present authoritative and comprehensive reviews written by recognized experts in the field. This book should be useful to all students, scientists, and engineers who desire to know more about high temperature superconductivity.
Download or read book Applications of Superconductivity written by H. Weinstock and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, in essence the proceedings of a NATO Advanced Study Institute with the same title, is designed to provide in-depth coverage of many, but not all, of the major current applications of superconductivity, and of many that still are being developed. It will be of value to scientists and engineers who have interests in the research and production aspects of the technology, as well as in the applications themselves. The ftrst three chapters (by Clarke, Vrba and Wikswo) are devoted to an understanding of the principles, fabrication and uses of SQUID magnetometers and gradiometers, with the greatest emphasis on biomagnetism and nondestructive evaluation (NDE). For the most part, traditional low-temperature superconductor (LTS) SQUIDs are used, but particularly for NDE, high-temperature superconductor (HTS) SQUIDs are proving useful and often more convenient. The succeeding three chapters (by Przybysz, Likharev and Chaloupka) cover broader aspects of superconducting electronics. The ftrst two of these deal primarily with digital L TS circuits, while the third discusses in great detail passive component applications using HTS materials. Currently, HTS ftlters are undergoing intense J3-site testing at cellular telephone base stations. While it is clear that HTS ftlters outperform conventional ftlters in reducing signal loss and allowing for more channels in a given bandwidth, it isn't yet certain that the cellular telephone industry sees sufficient economic beneftts to make a ftrm decision to use HTS ftlters universally in its systems. If this application is generally adapted, the market for these ftlters should be quite large.
Download or read book Congressional Record written by United States. Congress and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Congressional Record is the official record of the proceedings and debates of the United States Congress. It is published daily when Congress is in session. The Congressional Record began publication in 1873. Debates for sessions prior to 1873 are recorded in The Debates and Proceedings in the Congress of the United States (1789-1824), the Register of Debates in Congress (1824-1837), and the Congressional Globe (1833-1873)
Download or read book Materials for Sustainable Energy written by Vincent Dusastre and published by World Scientific. This book was released on 2011 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The search for cleaner, cheaper, smaller and more efficient energy technologies has to a large extent been motivated by the development of new materials. The aim of this collection of articles is therefore to focus on what materials-based solutions can offer and show how the rationale design and improvement of their physical and chemical properties can lead to energy-production alternatives that have the potential to compete with existing technologies. In terms of alternative means to generate electricity that utilize renewable energy sources, the most dramatic breakthroughs for both mobile (i.e., transportation) and stationary applications are taking place in the fields of solar and fuel cells. And from an energy-storage perspective, exciting developments can be seen emerging from the fields of rechargeable batteries and hydrogen storage.
