Download or read book Encyclopedia of Polymer Science and Technology v 5 Acoustic properties to cyclopentadiene and dicyclopentadiene written by and published by . This book was released on 2003 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Polymer Science and Technology v 9 Acrylic fibers to ethylene oxide polymers written by and published by . This book was released on 2004 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Polymer Science and Technology written by and published by . This book was released on 2004 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely new Third Edition of the Mark Encyclopedia of Polymer Science and Technology brings the state-of-the-art to the 21st century, with coverage of nanotechnology, new imaging and analytical techniques, new methods of controlled polymer architecture, biomimetics, and more. Whereas earlier editions published one volume at a time, the third edition is being published in 3 Parts of 4 volumes each. Each of these 4-volume Parts is an A-Z selection of the latest in polymer science and technology as published in the updated online edition of the Mark Encyclopedia of Polymer Science and Technology (available at www.mrw.interscience.wiley.com/epst). Order the 12 volume set (ISBN 0471275077) now for the best value and receive each of the 4 volume Parts as they publish. The complete list of titles to appear in Part 1 of this new third print edition can be viewed at www.mrw.interscience.wiley.com/epst and clicking on "What's New". Check this website often as new articles are added periodically.
Download or read book Encyclopedia of Polymer Science and Technology written by Jacqueline I. Kroschwitz and published by . This book was released on 2004 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely new Third Edition of the Mark Encyclopedia of Polymer Science and Technology brings the state-of-the-art to the 21st century, with coverage of nanotechnology, new imaging and analytical techniques, new methods of controlled polymer architecture, biomimetics, and more. Whereas earlier editions published one volume at a time, the third edition is being published in 3 Parts of 4 volumes each. Each of these 4-volume Parts is an A-Z selection of the latest in polymer science and technology as published in the updated online edition of the Mark Encyclopedia of Polymer Science and Technology (available at www.mrw.interscience.wiley.com/epst). Order the 12 volume set (ISBN 0471275077) now for the best value and receive each of the 4 volume Parts as they publish. The complete list of titles to appear in Part 1 of this new third print edition can be viewed at www.mrw.interscience.wiley.com/epst and clicking on "What's New". Check this website often as new articles are added periodically.
Download or read book Encyclopedia of Polymer Science and Technology Part 3 written by Herman F. Mark and published by Wiley-Interscience. This book was released on 2004-09-27 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third Edition is a completely new version in a new century of the Encyclopedia of Polymer Science and Technology. The new edition will bring the state-of-the-art up to the 21st century, with coverage of nanotechnology, new imaging and analytical techniques, new methods of controlled polymer architecture, biomimetics, and more. New topics covered include nanotechnology, AFM, MALDI, biomimetics, and genetic methods, of increasing importance since 1990 and will also bring up-to-date coverage of traditional topics of continuing interest. This edition will publish in 3 Parts of 4 volumes each. Each Part will be an A-Z selection of the newest articles available in the online edition of this encyclopedia. A list of the titles to appear in Part I can be viewed by clicking "What's New" at www.mrw.interscience.wiley.com/epst. Titles for Parts II and III will appear there as well when available.
Download or read book Encyclopedia of Polymer Science and Technology Part 2 written by Herman F. Mark and published by Wiley-Interscience. This book was released on 2003 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third Edition is a completely new version in a new century of the Encyclopedia of Polymer Science and Technology. The new edition will bring the state-of-the-art up to the 21st century, with coverage of nanotechnology, new imaging and analytical techniques, new methods of controlled polymer architecture, biomimetics, and more. New topics covered include nanotechnology, AFM, MALDI, biomimetics, and genetic methods, of increasing importance since 1990 and will also bring up-to-date coverage of traditional topics of continuing interest. This edition will publish in 3 Parts of 4 volumes each. Each Part will be an A-Z selection of the newest articles available in the online edition of this encyclopedia. A list of the titles to appear in Part I can be viewed by clicking "What's New" at www.mrw.interscience.wiley.com/epst. Titles for Parts II and III will appear there as well when available.
Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 2005 with total page 2142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Book Publishing Record written by and published by . This book was released on 2005 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Thermoset Resins written by Debdatta Ratna and published by Smithers Rapra Technology. This book was released on 2009 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ratna presents a detailed review of the recent advances on thermostat-based composites and nanocomposites, highlighting the future directions of research in various areas of thermostat resins.
Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.
Download or read book Organic Polymer Chemistry written by K. J. Saunders and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the organic chemistry of polymers which find technological use as adhesives, fibres, paints, plastics and rubbers. For the most part, only polymers which are of commercial significance are considered and the primary aim of the book is to relate theoretical aspects to industrial practice. The book is mainly intended for use by students in technical institutions and universities who are specializing in polymer science and by graduates who require an introduction to this field. Several excellent books have recently appeared dealing with the physical chemistry of polymers but the organic chemistry of polymers has not received so much attention. In recognition of this situation and because the two aspects of polymer chemistry are often taught separately, this book deals specifically with organic chemistry and topics of physical chemistry have been omitted. Also, in this way the book has been kept to a reasonable size. This is not to say that integration of the two areas of polymer science is undesirable; on the contrary, it is of the utmost importance that the inter-relationship should b~ appreciated. I wish to record my thanks to my colleagues with whom I have had many helpful discussions, particularly Mrs S. L. Radchenko. I also thank Miss E. Friesen for obtaining many books and articles on my behalf and Mr H. Harms for encouragement and assistance. I am also grateful to Mrs M. Stevens who skilfully prepared the manuscript. Department of Chemical and Metallurgical Technology, Ryerson Polytechnical Institute, K. J. S.
Download or read book Handbook of Polyolefins written by Cornelia Vasile and published by CRC Press. This book was released on 2000-06-21 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.
Download or read book Chemistry of Fragrances written by David H Pybus and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern perfumery is a blend of art, science and technology, with chemistry being the central science involved. The Chemistry of Fragrances aims to educate and entertain, and inform the audience of the very latest chemistry, techniques and tools applied to fragrance creativity. Beginning with the history of perfumes, which goes back over fifty thousand years, the book goes on to discuss the structure of the Perfume Industry today. The focus then turns to an imaginary brief to create a perfume, and the response to it, including that of the chemist and the creative perfumer. Consumer research, toxicological concerns, and the use of the electronic nose are some of the topics discussed on this journey of discovery. Written by respected experts in their fields, this unique book gives an insider view of ""mixing molecules"" from behind the portals of modern-day alchemy. It will be enjoyed by chemists and marketeers at all levels.
Download or read book Handbook of Pressure Sensitive Adhesives and Products written by Istvan Benedek and published by CRC Press. This book was released on 2019-07-05 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Divided into three sections that are also available as individual volumes, this is the first reference to offer a complete guide to the fundamentals, manufacturing, and applications of pressure-sensitive adhesives and products. An indispensable source of state-of-the-art information, this handbook covers the design for pressure-sensitive adhesives and products, the manufacture technology and equipment for such products, including their testing and application, and the theory and practice that correlate with the main domains of product development. Topically organized, it presents a comprehensive list of terms and definitions and offers a cross-disciplinary look at pressure-sensitive adhesives, spanning such areas as physics, surface chemistry, electronic materials, automotive engineering, packaging, and the biomedical, tape, and label industries. For more complete information on each volume visit www.crcpress.com or go directly to the webpage: Volume 1: Fundamentals of Pressure Sensitivity Volume 2: Technology of Pressure-Sensitive Adhesives and Products Volume 3: Applications of Pressure-Sensitive Products
Download or read book Commercial Polymer Blends written by L.A. Utracki and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in depth and unparalleled presentation of the compositions of virtually all polymer blends.
Download or read book The Chemistry of Mercury written by Charles Andrew McAuliffe and published by Springer. This book was released on 2016-03-21 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rubber Compounding written by Brendan Rodgers and published by CRC Press. This book was released on 2004-07-23 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlighting more than a decade of research, this one-of-a-kind reference reviews the production, processing, and characteristics of a wide range of materials utilized in the modern tire and rubber industry. Rubber Compounding investigates the chemistry and modification of raw materials, elastomers, and material compounds for optimal formulation an
