Download or read book Encyclopedia of Polymer Science and Technology Encyclopedia of Polymer Science and Technology Third Edition Volume 2 written by Herman F. Mark and published by Wiley-Interscience. This book was released on 2003-02-07 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely new Third Edition of the Mark Encyclopedia of Polymer Science and Technology brings the state-of-the-art to the 21st century, with coverage of nanotechnology, new imaging and analytical techniques, new methods of controlled polymer architecture, biomimetics, and more. Whereas earlier editions published one volume at a time, the third edition is being published in 3 Parts of 4 volumes each. Each of these 4-volume Parts is an A-Z selection of the latest in polymer science and technology as published in the updated online edition of the Mark Encyclopedia of Polymer Science and Technology (available at www.mrw.interscience.wiley.com/epst). Order the 12 volume set (ISBN 0471275077) now for the best value and receive each of the 4 volume Parts as they publish. The complete list of titles to appear in Part 1 of this new third print edition can be viewed at www.mrw.interscience.wiley.com/epst and clicking on "What's New". Check this website often as new articles are added periodically.

Download or read book Encyclopedia of Polymer Science and Engineering written by and published by . This book was released on 1987 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastics Technology Handbook Third Edition written by Manas Chanda and published by CRC Press. This book was released on 1998-04-10 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Completely updated and enlarged to reflect the advances that have taken place since the publication of the Second Edition. Third Edition offers concise examinations of the chemical nature, characteristic properties, and uses of traditional industrial polymers, such as acrylics, polyolefins, vinyl polymers, polyesters, epoxies, and silicones, among others."

Download or read book Ullmann s Polymers and Plastics written by Wiley-VCH and published by John Wiley & Sons. This book was released on 2016-03-18 with total page 1934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your personal Ullmann's: Chemical and physical characteristics, production processes and production figures, main applications, toxicology and safety information are all to be found here in one single resource - bringing the vast knowledge of the Ullmann's Encyclopedia to the desks of industrial chemists and chemical engineers. The ULLMANN’S perspective on polymers and plastics brings reliable information on more than 1500 compounds and products straight to your desktop Carefully selected “best of” compilation of 61 topical articles from the Encyclopedia of Industrial Chemistry on economically important polymers provide a wealth of chemical, physical and economic data on more than 1000 different polymers and hundreds of modifications Contains a wealth of information on the production and use of all industrially relevant polymers and plastics, including organic and inorganic polymers, fibers, foams and resins Extensively updated: more than 30% of the content has been added or updated since the launch of the 7th edition of the Ullmann’s encyclopedia in 2011 and is now available in print for the first time 4 Volumes

Download or read book Group Interaction Modelling of Polymer Properties written by David Porter and published by CRC Press. This book was released on 1995-02-08 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes a consistent set of relations between the structure of polymers and their commercially important thermal and mechanical properties for engineering applications--facilitating the development of a framework of polymer physics to explore new application areas without prior correlations. Includes methods for the easy calculation of input parameters and tabulates the most important parameters for 250 polymers.

Download or read book Handbook of Fiber Finish Technology written by Philip E. Slade and published by Routledge. This book was released on 2018-10-03 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the components of textile finishes, and the chemical and physical properties of, as well as their effects on, various fibres. The book covers fundamentals of fibre finish science, such as theories of friction; laboratory testing of formulations, from preliminary component evaluation to analyses for material characterization; and the influence of wetting, emulsification and finish distribution on coatings.

Download or read book Mihail Ionescu Polyols for Polyurethanes Volume 2 written by Mihail Ionescu and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-09-02 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of the updated and extended 3rd edition of this work focuses on the chemistry and technology of rigid polyurethanes. Recent developments in obtaining polyols from renewable resources and the field of rigid polyurethanes have been included. This book is of interest to chemists and engineers in industry and academia as well as anyone working with polyols for the manufacture of PUs.

Download or read book Materials Selection in Mechanical Design written by Michael F. Ashby and published by Elsevier. This book was released on 2004-12-30 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding materials, their properties and behavior is fundamental to engineering design, and a key application of materials science. Written for all students of engineering, materials science and design, this book describes the procedures for material selection in mechanical design in order to ensure that the most suitable materials for a given application are identified from the full range of materials and section shapes available. Fully revised and expanded for this third edition, Materials Selection in Mechanical Design is recognized as one of the leading texts, and provides a unique and genuinely innovative resource. Features new to this edition • New chapters on topics including process selection, material and shape selection, design of hybrid materials, environmental factors and industrial design.• Reader-friendly approach and attractive, easy to use two-color presentation.• The methods developed in the book are implemented in Granta Design's widely used CES Educational software.Materials are introduced through their properties; materials selection charts (now available on line) capture the important features of all materials, allowing rapid retrieval of information and application of selection techniques. Merit indices, combined with charts, allow optimization of the materials selection process. Sources of material property data are reviewed and approaches to their use are given. Material processing and its influence on the design are discussed. New chapters on environmental issues, industrial engineering and materials design are included, as are new worked examples, and exercise materials. New case studies have been developed to further illustrate procedures and to add to the practical implementation of the text. The new edition of the leading materials selection text Expanded and fully revised throughout, with new material on key emerging topics, an even more student-friendly approach, and attractive, easy to use two-color presentation

Download or read book Food Packaging written by Gordon L. Robertson and published by CRC Press. This book was released on 2005-09-22 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and accessible textbook, Food Packaging: Principles and Practice, Second Edition presents an integrated approach to understanding the principles underlying food packaging and their applications. Integrating concepts from chemistry, microbiology, and engineering, it continues in the fine tradition of its bestselling predecessor - and has been completely updated to include new, updated, and expanded content. The author divides the book's subject matter into five parts for ease-of-use. The first part addresses the manufacture, properties, and forms of packaging materials, placing emphasis on those properties that influence the quality and shelf life of food. The second part then details the various types of deteriorative reactions that foods undergo, examines the extrinsic factors controlling their reaction rates, and discusses specific factors influencing shelf life and the methodology used to estimate that shelf life. Chapters on the aseptic packaging of foods, active and intelligent packaging, modified atmosphere packaging, and microwavable food packaging are explored in the third part, while the fourth part describes packaging requirements of the major food groups. The final section examines the safety and legislative aspects of food packaging. The book also includes over 300 industry abbreviations, acronyms, and symbols, and an expansive index. What's New in the Second Edition: Includes five new chapters and diagrams that explain recent developments in packaging materials and processes Provides the latest information on new and active packaging technologies Presents new, updated, and expanded references Adhering to the highly organized format that made the first edition so straightforward and informative, this latest edition of Food Packaging: Principles and Practice presents students with the most essential and cutting-edge information available. The author maintains a website with more information.

Download or read book Introduction to Polymers Third Edition written by Robert J. Young and published by CRC Press. This book was released on 2011-06-27 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated, Introduction to Polymers, Third Edition presents the science underpinning the synthesis, characterization and properties of polymers. The material has been completely reorganized and expanded to include important new topics and provide a coherent platform for teaching and learning the fundamental aspects of contemporary polymer science. New to the Third Edition Part I This first part covers newer developments in polymer synthesis, including ‘living’ radical polymerization, catalytic chain transfer and free-radical ring-opening polymerization, along with strategies for the synthesis of conducting polymers, dendrimers, hyperbranched polymers and block copolymers. Polymerization mechanisms have been made more explicit by showing electron movements. Part II In this part, the authors have added new topics on diffusion, solution behaviour of polyelectrolytes and field-flow fractionation methods. They also greatly expand coverage of spectroscopy, including UV visible, Raman, infrared, NMR and mass spectroscopy. In addition, the Flory–Huggins theory for polymer solutions and their phase separation is treated more rigorously. Part III A completely new, major topic in this section is multicomponent polymer systems. The book also incorporates new material on macromolecular dynamics and reptation, liquid crystalline polymers and thermal analysis. Many of the diagrams and micrographs have been updated to more clearly highlight features of polymer morphology. Part IV The last part of the book contains major new sections on polymer composites, such as nanocomposites, and electrical properties of polymers. Other new topics include effects of chain entanglements, swelling of elastomers, polymer fibres, impact behaviour and ductile fracture. Coverage of rubber-toughening of brittle plastics has also been revised and expanded. While this edition adds many new concepts, the philosophy of the book remains unchanged. Largely self-contained, the text fully derives most equations and cross-references topics between chapters where appropriate. Each chapter not only includes a list of further reading to help readers expand their knowledge of the subject but also provides problem sets to test understanding, particularly of numerical aspects.

Download or read book Handbook of Polymer Crystallization written by Ewa Piorkowska and published by John Wiley & Sons. This book was released on 2013-07-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric crystals are more complex in nature than other materials' crystal structures due to significant structural disorder present. The only comprehensive reference on polymer crystallization, Handbook of Polymer Crystallization provides readers with a broad, in-depth guide on the subject, covering the numerous problems encountered during crystallization as well as solutions to resolve those problems to achieve the desired result. Edited by leading authorities in the field, topics explored include neat polymers, heterogeneous systems, polymer blends, polymer composites orientation induced crystallization, crystallization in nanocomposites, and crystallization in complex thermal processing conditions.

Download or read book Technology of Fluoropolymers written by Jiri George Drobny and published by CRC Press. This book was released on 2008-09-19 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully revised and updated, this second edition continues to provide industrial chemists, technologists, and engineers with the most accurate, compact, and practical source on fluoropolymers (such as Teflon). Highlighting new industrial, military, medical, and consumer goods applications, this edition adds more detailed information on equipment and

Download or read book Scanning Electron Microscopy and X Ray Microanalysis written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides students as well as practitioners with a comprehensive introduction to the field of scanning electron microscopy (SEM) and X-ray microanalysis. The authors emphasize the practical aspects of the techniques described. Topics discussed include user-controlled functions of scanning electron microscopes and x-ray spectrometers and the use of x-rays for qualitative and quantitative analysis. Separate chapters cover SEM sample preparation methods for hard materials, polymers, and biological specimens. In addition techniques for the elimination of charging in non-conducting specimens are detailed.

Download or read book Information Sources in Engineering written by Roderick A. Macleod and published by Walter de Gruyter GmbH & Co KG. This book was released on 2012-04-17 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current, thoroughly revised and updated edition of this approved title, evaluates information sources in the field of technology. It provides the reader not only with information of primary and secondary sources, but also analyses the details of information from all the important technical fields, including environmental technology, biotechnology, aviation and defence, nanotechnology, industrial design, material science, security and health care in the workplace, as well as aspects of the fields of chemistry, electro technology and mechanical engineering. The sources of information presented also contain publications available in printed and electronic form, such as books, journals, electronic magazines, technical reports, dissertations, scientific reports, articles from conferences, meetings and symposiums, patents and patent information, technical standards, products, electronic full text services, abstract and indexing services, bibliographies, reviews, internet sources, reference works and publications of professional associations. Information Sources in Engineering is aimed at librarians and information scientists in technical fields as well as non-professional information specialists, who have to provide information about technical issues. Furthermore, this title is of great value to students and people with technical professions.

Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. - Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more - Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers - Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues

Download or read book Handbook of Polymer Synthesis written by Hans R. Kricheldorf and published by CRC Press. This book was released on 2004-11-27 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth review of important preparative methods for the synthesis and chemical modification of polymers, this authoritative second edition examines the advantages and limitations of various polymerization applications and procedures. It features new approaches and innovative strategies from the most prominent industry and academic laboratories,

Download or read book Polymer Science A Comprehensive Reference written by and published by Newnes. This book was released on 2012-12-05 with total page 7752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progress in polymer science is revealed in the chapters of Polymer Science: A Comprehensive Reference, Ten Volume Set. In Volume 1, this is reflected in the improved understanding of the properties of polymers in solution, in bulk and in confined situations such as in thin films. Volume 2 addresses new characterization techniques, such as high resolution optical microscopy, scanning probe microscopy and other procedures for surface and interface characterization. Volume 3 presents the great progress achieved in precise synthetic polymerization techniques for vinyl monomers to control macromolecular architecture: the development of metallocene and post-metallocene catalysis for olefin polymerization, new ionic polymerization procedures, and atom transfer radical polymerization, nitroxide mediated polymerization, and reversible addition-fragmentation chain transfer systems as the most often used controlled/living radical polymerization methods. Volume 4 is devoted to kinetics, mechanisms and applications of ring opening polymerization of heterocyclic monomers and cycloolefins (ROMP), as well as to various less common polymerization techniques. Polycondensation and non-chain polymerizations, including dendrimer synthesis and various "click" procedures, are covered in Volume 5. Volume 6 focuses on several aspects of controlled macromolecular architectures and soft nano-objects including hybrids and bioconjugates. Many of the achievements would have not been possible without new characterization techniques like AFM that allowed direct imaging of single molecules and nano-objects with a precision available only recently. An entirely new aspect in polymer science is based on the combination of bottom-up methods such as polymer synthesis and molecularly programmed self-assembly with top-down structuring such as lithography and surface templating, as presented in Volume 7. It encompasses polymer and nanoparticle assembly in bulk and under confined conditions or influenced by an external field, including thin films, inorganic-organic hybrids, or nanofibers. Volume 8 expands these concepts focusing on applications in advanced technologies, e.g. in electronic industry and centers on combination with top down approach and functional properties like conductivity. Another type of functionality that is of rapidly increasing importance in polymer science is introduced in volume 9. It deals with various aspects of polymers in biology and medicine, including the response of living cells and tissue to the contact with biofunctional particles and surfaces. The last volume is devoted to the scope and potential provided by environmentally benign and green polymers, as well as energy-related polymers. They discuss new technologies needed for a sustainable economy in our world of limited resources. Provides broad and in-depth coverage of all aspects of polymer science from synthesis/polymerization, properties, and characterization methods and techniques to nanostructures, sustainability and energy, and biomedical uses of polymers Provides a definitive source for those entering or researching in this area by integrating the multidisciplinary aspects of the science into one unique, up-to-date reference work Electronic version has complete cross-referencing and multi-media components Volume editors are world experts in their field (including a Nobel Prize winner)